Hierarchical Zeolites with Amine‐Functionalized Mesoporous Domains for Carbon Dioxide Capture
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
To prepare materials with high CO 2 adsorption, a series of hierarchical LTA zeolites possessing various mesopore spaces that are decorated with alkylamines was designed and synthesized. The highest CO 2 uptake capacity was achieved when (3‐aminopropyl)trimethoxysilane (APTMS) was grafted onto the hierarchical LTA zeolite having the largest mesopores. Owing to the contributions of both alkylamine groups grafted onto the mesopore surfaces and active sites in the LTA zeolites, the amount of CO 2 that can be taken up on these materials is much higher than for conventional aminosilicas such SBA‐15 and MCM‐41. Furthermore, the adsorbent shows good CO 2 uptake capacity and recyclability in dynamic flow conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021
Cited by
Emerging trends in porous materials for CO2capture and conversion
Singh, G., Lee, J., Karakoti, A., Bahadur, R., Yi, J., Zhao, D., AlBahily, K., & Vinu, A. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00075b · Cited by 843
Porous materials for carbon dioxide separations
Siegelman, R. L., Kim, E. J., & Long, J. R. (2021) · Nature Materials · doi:10.1038/s41563-021-01054-8 · Cited by 722
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Utilization of zeolites as CO2 capturing agents: Advances and future perspectives
Kumar, S., Srivastava, R., & Koh, J. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101251 · Cited by 405
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Carbon dioxide capture with zeotype materials
Fu, D., & Davis, M. E. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00508e · Cited by 284
Siegelman, R. L., Milner, P. J., Kim, E. J., Weston, S. C., & Long, J. R. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00505f · Cited by 203
Senftle, T. P., & Carter, E. A. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00479 · Cited by 184
Synthesis, characterization and CO2 adsorption of NaA, NaX and NaZSM-5 from rice husk ash
Wang, Y., Du, T., Jia, H., Qiu, Z., & Song, Y. (2018) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2018.10.003 · Cited by 67
Metadata
- Authors
- Nguyen, T. H., Kim, S., Yoon, M., & Bae, T.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2016-02-02
- Volume
- 9
- Issue
- 5
- Pages
- 455-461
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2264288639
- Cited by
- 109
- References
- 1
- FWCI
- 7.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.