Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.

Catalytic Fast Pyrolysis of Lignin over High‐Surface‐Area Mesoporous Aluminosilicates: Effect of Porosity and Acidity

Custodis, Victoria B. F., Karakoulia, Stamatia A., Triantafyllidis, Kostas S., van Bokhoven, Jeroen A. · 2016 · ChemSusChem

Abstract

Catalytic fast pyrolysis (CFP) of lignin with amorphous mesoporous aluminosilicates catalysts yields a high fraction of aromatics and a relatively low amount of char/coke. The relationship between the acidity and porosity of Al‐MCM‐41, Al‐SBA‐15, and Al‐MSU‐J with product selectivity during lignin CFP is determined. The acid sites (mild Brønsted and stronger Lewis) are able to catalyze pyrolysis intermediates towards fewer oxygenated phenols and aromatic hydrocarbons. A generalized correlation of the product selectivity and yield with the aluminum content and acidity of the mesoporous aluminosilicates is hard to establish. Zeolitic strong acid sites are not required to achieve high conversion and selectivity to aromatic hydrocarbon because nanosized MCM‐41 produces a high liquid yield and selectivity. The two most essential parameters are diffusion, which is influenced by pore and grain size, and the active site, which may be mildly acidic, but is dominated by Lewis acid sites. Nanosized grains and mild acidity are essential ingredients for a good lignin CFP catalyst.

Overview

Integrity signals

Registry

Crossref · 10.1002/cssc.201600105

Cites

49 of 49 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 1

  1. Britt P. F., 2002, Fuel Chem. Div., 47, 395

Cited by

See all 110

Metadata

Authors
Custodis, V. B. F., Karakoulia, S. A., Triantafyllidis, K. S., & van Bokhoven, J. A.
Affiliations
  • Paul Scherrer Institute (CH)
  • Centre for Research and Technology Hellas (GR)
  • Aristotle University of Thessaloniki (GR)
  • Department of Chemistry and Applied Biosciences ETH Zürich 8093 Zürich Switzerland
Corresponding author
Triantafyllidis, Kostas S.
Venue
ChemSusChem
Publisher
Wiley
Published
2016-04-15
Volume
9
Issue
10
Pages
1134-1145
ISSN
  • 1864-5631 (ISSN-L)
  • 1864-564X
OpenAlex
W2342057117
Cited by
108
References
49
Citations by year
2026: 3 · 2025: 3 · 2024: 12 · 2023: 7 · 2022: 14 · 2021: 8 · 2020: 17 · 2019: 16 · 2018: 13 · 2017: 12 · 2016: 3
FWCI
7.07
Type
journal article
Language
en
Open access
closed
Locations
  • ChemSusChem (publishedVersion)
  • PubMed (publishedVersion)
  • DORA PSI (Paul Scherrer Institute) (submittedVersion)
Funders
  • Swiss National Science Foundation (406640-136892)
  • European Union
  • Greek national funds
  • National Strategic Reference Framework (NSRF)-Research Funding Program: THALES
Topics
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
  • Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
Keywords
catalytic fast pyrolysis, lignin, mesoporous aluminosilicates, Al-MCM-41, Al-SBA-15, catalyst acidity, Lewis acid sites, Brønsted acid sites, porosity, aromatic hydrocarbon selectivity, char formation, diffusion, nanocatalysts, aluminum content
MeSH terms
Aluminum Silicates, Catalysis, Hydrogen-Ion Concentration, Kinetics, Lignin, Silicon Dioxide, Porosity, Biomass

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.