The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Effects of Self‐Assembled Monolayer Modification of Nickel Oxide Nanoparticles Layer on the Performance and Application of Inverted Perovskite Solar Cells
Open accessAbstract
Entirely low‐temperature solution‐processed (≤100 °C) planar p‐i‐n perovskite solar cells (PSCs) offer great potential for commercialization of roll‐to‐roll fabricated photovoltaic devices. However, the stable inorganic hole‐transporting layer (HTL) in PSCs is usually processed at high temperature (200–500 °C), which is far beyond the tolerant temperature (≤150 °C) of roll‐to‐roll fabrication. In this context, inorganic NiOx nanoparticles (NPs) are an excellent candidate to serve as the HTL in PSCs, owing to their excellent solution processability at room temperature. However, the low‐temperature processing condition is usually accompanied with defect formation, which deteriorates the film quality and device efficiency to a large extent. To suppress this setback, we used a series of benzoic acid selfassembled monolayers (SAMs) to passivate the surface defects of the NiOx NPs and found that 4‐bromobenzoic acid could effectively play the role of the surface passivation. This SAM layer reduces the trap‐assisted recombination, minimizes the energy offset between the NiOx NPs and perovskite, and changes the HTL surface wettability, thus enhancing the perovskite crystallization, resulting in more stable PSCs with enhanced power conversion efficiency (PCE) of 18.4 %, exceeding the control device PCE (15.5 %). Also, we incorporated the above‐mentioned SAMs into flexible PSCs (F‐PSCs) and achieved one of the highest PCE of 16.2 % on a polyethylene terephthalate (PET) substrate with a remarkable power‐per‐weight of 26.9 W g−1. This facile interfacial engineering method offers great potential for the large‐scale manufacturing and commercialization of PSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Electron-Hole Recombination in Germanium
Hall, R. N. (1952) · Physical Review · doi:10.1103/physrev.87.387 · Cited by 2,776
Heo, J. H., Im, S. H., Noh, J. H., Mandal, T. N., Lim, C.-S., Chang, J. A., Lee, Y. H., Kim, H.-J., Sarkar, A., Nazeeruddin, M. K., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.80 · Cited by 2,684
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Review of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
Self-citationChen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Self-citationDefects in perovskite-halides and their effects in solar cells
Ball, J. M., & Petrozza, A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.149 · Cited by 1,275
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Space-Charge Limited Photocurrent
Mihailetchi, V. D., Wildeman, J., & Blom, P. W. M. (2005) · Physical Review Letters · doi:10.1103/physrevlett.94.126602 · Cited by 1,130
Kaltenbrunner, M., Adam, G., Głowacki, E. D., Drack, M., Schwödiauer, R., Leonat, L., Apaydin, D. H., Groiss, H., Scharber, M. C., White, M. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4388 · Cited by 1,024
Interface Engineering for Organic Electronics
Ma, H., Yip, H., Huang, F., & Jen, A. K. ‐. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902236 · Cited by 950
Self-citationKim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833
Self-citationChueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
Self-citationKoster, L. J. A., Mihailetchi, V. D., Xie, H., & Blom, P. W. M. (2005) · Applied Physics Letters · doi:10.1063/1.2130396 · Cited by 683
Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512518r · Cited by 676
Wu, Y., Yang, X., Chen, W., Yue, Y., Cai, M., Xie, F., Bi, E., Islam, A., & Han, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.148 · Cited by 644
Abrusci, A., Stranks, S. D., Docampo, P., Yip, H.-L., Jen, A. K.-Y., & Snaith, H. J. (2013) · Nano Letters · doi:10.1021/nl401044q · Cited by 640
Self-citationAcidic and basic properties of hydroxylated metal oxide surfaces
Boehm, H. P. (1971) · Discussions of the Faraday Society · doi:10.1039/df9715200264 · Cited by 628
Polymer Solar Cells That Use Self‐Assembled‐Monolayer‐ Modified ZnO/Metals as Cathodes
Yip, H., Hau, S. K., Baek, N. S., Ma, H., & Jen, A. K. ‐. (2008) · Advanced Materials · doi:10.1002/adma.200703050 · Cited by 561
Self-citationZhang, H., Cheng, J., Lin, F., He, H., Mao, J., Wong, K. S., Jen, A. K.-Y., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b07043 · Cited by 560
Self-citationPark, J. H., Seo, J., Park, S., Shin, S. S., Kim, Y. C., Jeon, N. J., Shin, H., Ahn, T. K., Noh, J. H., Yoon, S. C., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500523 · Cited by 550
Highly Efficient Flexible Perovskite Solar Cells Using Solution-Derived NiOx Hole Contacts
Yin, X., Chen, P., Que, M., Xing, Y., Que, W., Niu, C., & Shao, J. (2016) · ACS Nano · doi:10.1021/acsnano.5b08135 · Cited by 476
Fully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer
Liu, L., Mei, A., Liu, T., Jiang, P., Sheng, Y., Zhang, L., & Han, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5125594 · Cited by 460
Zhu, Z., Bai, Y., Zhang, T., Liu, Z., Long, X., Wei, Z., Wang, Z., Zhang, L., Wang, J., Yan, F., et al. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405176 · Cited by 457
Cesium Doped NiOx as an Efficient Hole Extraction Layer for Inverted Planar Perovskite Solar Cells
Chen, W., Liu, F., Feng, X., Djurišić, A. B., Chan, W. K., & He, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700722 · Cited by 457
Effects of molecular interface modification in hybrid organic-inorganic photovoltaic cells
Goh, C., Scully, S. R., & McGehee, M. D. (2007) · Journal of Applied Physics · doi:10.1063/1.2737977 · Cited by 452
Effect of traps on the performance of bulk heterojunction organic solar cells
Mandoc, M. M., Kooistra, F. B., Hummelen, J. C., de Boer, B., & Blom, P. W. M. (2007) · Applied Physics Letters · doi:10.1063/1.2821368 · Cited by 413
Termination Dependence of Tetragonal CH3NH3PbI3 Surfaces for Perovskite Solar Cells
Haruyama, J., Sodeyama, K., Han, L., & Tateyama, Y. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501510v · Cited by 380
High‐Efficiency Solution‐Processed Planar Perovskite Solar Cells with a Polymer Hole Transport Layer
Zhao, D., Sexton, M., Park, H., Baure, G., Nino, J. C., & So, F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401855 · Cited by 380
Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells
Zuo, L., Chen, Q., De Marco, N., Hsieh, Y.-T., Chen, H., Sun, P., Chang, S.-Y., Zhao, H., Dong, S., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04015 · Cited by 373
Real-space observation of unbalanced charge distribution inside a perovskite-sensitized solar cell
Bergmann, V. W., Weber, S. A. L., Javier Ramos, F., Nazeeruddin, M. K., Grätzel, M., Li, D., Domanski, A. L., Lieberwirth, I., Ahmad, S., & Berger, R. (2014) · Nature Communications · doi:10.1038/ncomms6001 · Cited by 369
Interfacial modification to improve inverted polymer solar cells
Hau, S. K., Yip, H.-L., Acton, O., Baek, N. S., Ma, H., & Jen, A. K.-Y. (2008) · Journal of Materials Chemistry · doi:10.1039/b808004f · Cited by 361
Self-citationBai, Y., Chen, H., Xiao, S., Xue, Q., Zhang, T., Zhu, Z., Li, Q., Hu, C., Yang, Y., Hu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505215 · Cited by 351
Phosphonic Acids for Interfacial Engineering of Transparent Conductive Oxides
Paniagua, S. A., Giordano, A. J., Smith, O. L., Barlow, S., Li, H., Armstrong, N. R., Pemberton, J. E., Brédas, J.-L., Ginger, D., & Marder, S. R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00061 · Cited by 347
Highly Efficient Flexible Perovskite Solar Cells UsingSolution-Derived NiOx Hole Contacts
Yin, X., Chen, P., Meidan, Q., Yonglei, X., Que, W., Chunming, N., & Shao, J. (2016) · INDIGO (University of Illinois at Chicago) · doi:10.1021/acsnano.5b08135.s001 · Cited by 340
Rühle, S., Greenshtein, M., Chen, S.-G., Merson, A., Pizem, H., Sukenik, C. S., Cahen, D., & Zaban, A. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp0514123 · Cited by 338
Laibinis, P. E., & Whitesides, G. M. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00032a009 · Cited by 333
Cha, M., Da, P., Wang, J., Wang, W., Chen, Z., Xiu, F., Zheng, G., & Wang, Z.-S. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04519 · Cited by 282
Hole‐Transporting Materials in Inverted Planar Perovskite Solar Cells
Yan, W., Ye, S., Li, Y., Sun, W., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600474 · Cited by 277
Current Challenges and Prospective Research for Upscaling Hybrid Perovskite Photovoltaics
Williams, S. T., Rajagopal, A., Chueh, C.-C., & Jen, A. K.-Y. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02651 · Cited by 231
Self-citationWang, Q., Chueh, C.-C., Eslamian, M., & Jen, A. K.-Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11757 · Cited by 226
Self-citationZhang, H., Cheng, J., Li, D., Lin, F., Mao, J., Liang, C., Jen, A. K. ‐., Grätzel, M., & Choy, W. C. H. (2017) · Advanced Materials · doi:10.1002/adma.201604695 · Cited by 225
Self-citationLiu, S., Liu, R., Chen, Y., Ho, S., Kim, J. H., & So, F. (2014) · Chemistry of Materials · doi:10.1021/cm501898y · Cited by 213
Overcoming the Interface Losses in Planar Heterojunction Perovskite‐Based Solar Cells
Hou, Y., Chen, W., Baran, D., Stubhan, T., Luechinger, N. A., Hartmeier, B., Richter, M., Min, J., Chen, S., Quiroz, C. O. R., et al. (2016) · Advanced Materials · doi:10.1002/adma.201504168 · Cited by 206
High Efficiency Inverted Planar Perovskite Solar Cells with Solution-Processed NiOx Hole Contact
Yin, X., Yao, Z., Luo, Q. G., Dai, X., Zhou, Y., Zhang, Y., Zhou, Y., Luo, S., Li, J., Wang, N., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13372 · Cited by 150
Zhu, H. L., Cheng, J., Zhang, D., Liang, C., Reckmeier, C. J., Huang, H., Rogach, A. L., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.6b02425 · Cited by 137
Self-citationBin, Z., Li, J., Wang, L., & Duan, L. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01987k · Cited by 119
Cited by
Boyd, C. C., Shallcross, R. C., Moot, T., Kerner, R., Bertoluzzi, L., Onno, A., Kavadiya, S., Chosy, C., Wolf, E. J., Werner, J., et al. (2020) · Joule · doi:10.1016/j.joule.2020.06.004 · Cited by 639
Halide Perovskites: Is It All about the Interfaces?
Schulz, P., Cahen, D., & Kahn, A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00558 · Cited by 558
Li, L., Wang, Y., Wang, X., Lin, R., Luo, X., Liu, Z., Zhou, K., Xiong, S., Bao, Q., Chen, G., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01045-2 · Cited by 534
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Self-citation
Metadata
- Authors
- Wang, Q., Chueh, C., Zhao, T., Cheng, J., Eslamian, M., Choy, W. C. H., & Jen, A. K. ‐.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2017-09-25
- Volume
- 10
- Issue
- 19
- Pages
- 3794-3803
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2752648636
- Cited by
- 253
- References
- 52
- FWCI
- 8.61
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.