Catalytic Behavior of K-doped Fe/MgO Catalysts for Ammonia Synthesis Under Mild Reaction Conditions
Published version of a preprint
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
An important part of realizing a carbon‐neutral society using ammonia will be the development of an inexpensive yet efficient catalyst for ammonia synthesis under mild reaction conditions (<400 °C, <10 MPa). Here, we report Fe/K(3)/MgO, fabricated via an impregnation method, as a highly active catalyst for ammonia synthesis under mild reaction conditions (350 °C, 1.0 MPa). At the mentioned conditions, the activity of Fe/K(3)/MgO (17.5 mmol h −1 g cat −1 ) was greater than that of a commercial fused iron catalyst (8.6 mmol h −1 g cat −1 ) currently used in the Haber‐Bosch process. K doping was found to increase the ratio of Fe 0 on the surface and turnover frequency of Fe in our Fe/K(3)/MgO catalyst. In addition, increasing the pressure to 3.0 MPa at the same temperature led to a significant improvement of the ammonia synthesis rate to 29.6 mmol h −1 g cat −1 , which was higher than that of two more expensive, benchmark Ru‐based catalysts, which are also potential alternative catalysts. A kinetics analysis revealed that the addition of K enhanced the ammonia synthesis activity at ≥300 °C by changing the main adsorbed species from NH to N which can accelerate dissociative adsorption of nitrogen as the rate limiting step in ammonia synthesis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In conventional heterogeneous catalysis, the α value for N2 typically hovers near unity (0.8–1.0) [118]. Specific examples include Co NPs (α = 1.08) [277], Ru/MgO (α = 1.4), RuFe/MgO (α = 0.97) [248], Fe/K(3)/MgO-500red (α = 1.0), Ru/CeO2-500red (α = 0.85) [70], Cs+/Ru/MgO-500red (α = 1.07), Ru/CeO2-500red (α = 0.85), Co/Ba/La2O3-700red (α = 0.85), Co/La2O3-700red (α = 0.97) [114], commercial Fe (”
From Ammonia Synthesis over Transition Metal Catalysts: Reaction Mechanisms, Rate-Determining Steps, and Challenges (2025) · cites this paper as [70]
In the citing paper
“Fe-based catalysts (e.g., Fe/K(3)/MgO-500red and Fe/MgO-500red) exhibit significantly larger negative γ values compared to Ru-based catalysts (Cs+/Ru/MgO-500red and Ru/CeO2-500red) [70]. This behavior is attributed to the strong adsorption of NHx species on the Fe surface, where the equilibrium between NHx and NH3 inhibits N2 adsorption and activation. Drummond et al. [77] observed that γ for the”
From Ammonia Synthesis over Transition Metal Catalysts: Reaction Mechanisms, Rate-Determining Steps, and Challenges (2025) · cites this paper as [70]
In the citing paper
“A positive reaction order sometimes suggests weak adsorption, meaning the molecule’s physical coverage on the catalyst surface is minimal, while a negative order indicates strong adsorption [70], which may obstruct the adsorption of other species.”
From Ammonia Synthesis over Transition Metal Catalysts: Reaction Mechanisms, Rate-Determining Steps, and Challenges (2025) · cites this paper as [70]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalytic Processes to Accelerate Decarbonization in a Net-Zero Carbon World
Wang, Y., Tian, Y., Pan, S., & Snyder, S. W. (2022) · ChemSusChem · doi:10.1002/cssc.202201290 · Cited by 39
Research works printed but not linked: 37
- 10.1038/ngeo325 · DOI · Paper page
- 10.1021/acssuschemeng.7b02219 · DOI · Paper page
- 10.1016/j.pecs.2018.07.001 · DOI · Paper page
- 10.1039/b720020j · DOI · Paper page
- Eguchi K., 2016, Energy Technology Roadmaps of Japan, 167
- 10.1016/j.proci.2018.09.029 · DOI · Paper page
- 10.1038/s41929-018-0092-7 · DOI · Paper page
- 10.1016/S0360-0564(08)60375-2 · DOI · Paper page
- 10.1246/cl.200855 · doi:10.1246/cl.200855
- 10.1016/j.cattod.2016.08.012 · DOI · Paper page
- 10.1038/s41467-020-15868-8 · DOI · Paper page
- 10.1002/anie.201712398 · DOI · Paper page
- 10.1021/acssuschemeng.9b06299 · doi:10.1021/acssuschemeng.9b06299
- 10.1038/nchem.2595 · DOI · Paper page
- 10.1016/j.jcat.2020.10.031 · DOI
- 10.1021/acscatal.1c02887 · DOI
- 10.1021/acssuschemeng.7b02812 · DOI
- 10.1007/s12274-019-2349-0 · DOI
- 10.1021/jacs.2c13015 · DOI · Paper page
- 10.1627/jpi.64.1 · DOI
- 10.1002/slct.201803813 · doi:10.1002/slct.201803813
- 10.1016/0039-6028(82)90703-8 · DOI · Paper page
- 10.1016/0021-9517(75)90184-0 · DOI
- 10.1016/S0166-9834(00)82492-6 · DOI
- 10.1016/0021-9517(69)90396-0 · DOI
- 10.1016/0021-9517(80)90037-8 · doi:10.1016/0021-9517(80)90037-8
- 10.1016/0021-9517(88)90184-4 · DOI · Paper page
- 10.1016/S0169-4332(97)00343-7 · doi:10.1016/s0169-4332(97)00343-7
- 10.1016/S0926-860X(01)00626-3 · DOI · Paper page
- 10.1016/j.jtice.2019.10.006 · DOI
- 10.1107/S0021889809016690 · DOI · Paper page
- 10.1143/JJAP.50.11RH02 · DOI · Paper page
- 10.1002/aenm.201801772 · DOI · Paper page
- 10.1021/jacs.9b10726 · DOI · Paper page
- 10.1021/acscatal.7b00284 · DOI · Paper page
- 10.1016/j.apcatb.2020.119843 · DOI
- 10.1021/acscatal.1c05078 · DOI
Cited by
Varadwaj, P. R., Marques, H. M., & Grabowski, I. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26104670 · Cited by 24
Metadata
- Authors
- Era, K., Sato, K., Miyahara, S., Naito, T., De Silva, K., Akrami, S., Yamada, H., Toriyama, T., Yamamoto, T., Murakami, Y., Aika, K., Inazu, K., & Nagaoka, K.
- Affiliations
- Department of Chemical Systems Engineering, Graduate school of Engineering Nagoya University Furo-cho, Chikusa-ku Nagoya 464-8603 Japan
- Institutes of Innovation for Future Society Nagoya University Furo-cho, Chikusa-ku Nagoya 464-8603 Japan
- The Ultramicroscopy Research Center Kyushu University Motooka 744, Nishi-ku Fukuoka 819-0395 Japan
- National Institute of Technology Numazu College 3600 Ooka, Numazu Shizuoka 410-8501 Japan
- ORCID
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2023-11-14
- Volume
- 16
- Issue
- 22
- ISSN
- 1864-5631
- 1864-564X
- Cited by
- 18
- References
- 1
- Language
- en
- Funders
- Ministry of Education, Culture, Sports, Science and Technology (JPMXP1223KU0012)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.