CoChat

Growth and docosahexaenoic acid production performance of the heterotrophic marine microalgae Crypthecodinium cohnii in the wave‐mixed single‐use reactor CELL‐tainer

Hillig, Friederike, Porscha, Nadine, Junne, Stefan, Neubauer, Peter · 2014 · Engineering in Life Sciences
Cited by 26

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Abstract

The process development of docosahexaenoic acid (DHA) with the heterotrophic marine microalgae Crypthecodinium cohnii is challenging, since the oxygen demand of the cells is high and the cell itself sensitive to high shear forces. Furthermore, the marine medium, which comprises a high salt concentration, accelerates corrosion of steel typically applied in bioreactors. Single‐use bioreactors (SUBs) provide an alternative to common stainless steel stirred tank reactors (STR) for the development of bioprocesses with marine microorganisms, when the development stage does not allow for the application of special steel or the replacement of chloride ions in the medium. Among the readily‐available SUBs, the CELL‐tainer exhibits outstanding high oxygen transfer rates. A direct comparison of this SUB with a standard stirred tank bioreactor (STR) was performed for the cultivation of C. cohnii. The biomass and DHA concentrations were similar in both devices, while the biomass yield coefficient, related to the glucose consumption, was reduced by 35% and the DHA yield coefficient by 21% in the STR. The impact of shear stress on cell physiology was elucidated by flow cytometry, revealing a five times higher amount of cell debris in the STR and 14 times higher amount of cells with a low cell membrane potential as evaluated by bis‐(1,3‐dibutylbarbituric acid) trimethine oxonol staining. Foam and biofilm formation, which is a problem in the STR, did not occur in the SUB. The study underlines that the CELL‐tainer can replace the STR, ensuring sufficient oxygen transfer rates and decreasing cell damage and foam formation.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/elsc.201400010

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 26

Metadata

Authors
Hillig, F., Porscha, N., Junne, S., & Neubauer, P.
Venue
Engineering in Life Sciences
Publisher
Wiley
Published
2014-05
Volume
14
Issue
3
Pages
254-263
ISSN
  • 1618-0240 (ISSN-L)
  • 1618-2863
OpenAlex
W2147964064
Cited by
26
References
7
FWCI
0.98
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.