The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Pelletization of immobilized amine carbon dioxide sorbents with fly ash and poly (vinyl chloride)
Abstract
A combination of coal fly ash (FA) and a polymer binder, namely, poly(vinyl chloride) (PVC), was used to pelletize immobilized amine CO 2 sorbents. The pelletization of mixtures of FA and 50 wt % tetraethylenepentamine (TEPA) or ethylenimine oligomer mixture (Mw=423)/silica (EI 423‐S) with PVC created a rigid PVC/FA/sorbent network. The strength of the network was attributed, in part, to the hydrogen bonding of PVC with the hydroxy and amine groups of the FA and sorbent (infrared spectroscopy). Increasing the PVC molecular weight or FA content enhanced the pellet strength and reduced CO 2 capture. The optimum pellet, FA/EI 423‐S (20/80)_PVC 62 [10 wt % PVC 62 (Mw=62 000), 17 wt % FA], captured 1.33 mmol g−1 and exhibited a crush strength of 1.42 MPa. The reaction between PVC and amines produced ammonium ions (−NH 3+/−NH 2+), which reduced the CO 2 captured by the pellet during stability testing. This issue was partially resolved by replacing PVC 62 with p‐phenylenediamine‐modified PVC 62, which also enhanced the pellet CO 2 capture to 1.5 mmol g−1.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They observed that amines solution had a significant impact on CO 2 capture in the structure of microporous CO 2 adsorbents, unlike the pyridinic-N, pyridonic/pyrrolic-N and quaternary-N.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [292]
In the citing paper
“The highest CO 2 capture capacity of synthesized adsorbents reported 7.4 mmol.g -1 at 0 ᵒC and 1 bar.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [292]
Citations
Cites
Wang, X., Schwartz, V., Clark, J. C., Ma, X., Overbury, S. H., Xu, X., & Song, C. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp809946y · Cited by 381
Effect of high adhesive polyvinyl alcohol binder on the anodes of lithium ion batteries
Park, H.-K., Kong, B.-S., & Oh, E.-S. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.06.034 · Cited by 277
Li, K., Jiang, J., Yan, F., Tian, S., & Chen, X. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.09.057 · Cited by 223
In Situ ATR and DRIFTS Studies of the Nature of Adsorbed CO2 on Tetraethylenepentamine Films
Wilfong, W. C., Srikanth, C. S., & Chuang, S. S. C. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5031006 · Cited by 222
Self-citationSrikanth, C. S., & Chuang, S. S. C. (2012) · ChemSusChem · doi:10.1002/cssc.201100662 · Cited by 191
Investigation of the coal fly ashes using IR spectroscopy
Mozgawa, W., Król, M., Dyczek, J., & Deja, J. (2014) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2014.05.052 · Cited by 182
Sakwa‐Novak, M. A., & Jones, C. W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501500q · Cited by 137
In Situ Infrared Study of the Role of PEG in Stabilizing Silica‐Supported Amines for CO2 Capture
Tanthana, J., & Chuang, S. S. C. (2010) · ChemSusChem · doi:10.1002/cssc.201000090 · Cited by 128
Optimization of properties of fly ash aggregates for high-strength lightweight concrete production
Koçkal, N. U., & Özturan, T. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.02.028 · Cited by 122
Chemical modification of poly(vinyl chloride) by nucleophilic substitution
Kameda, T., Ono, M., Grause, G., Mizoguchi, T., & Yoshioka, T. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.006 · Cited by 111
Cited by
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
Recent advances in development of amine functionalized adsorbents for CO2 capture
Gelles, T., Lawson, S., Rownaghi, A. A., & Rezaei, F. (2020) · Adsorption · doi:10.1007/s10450-019-00151-0 · Cited by 167
Thakkar, H. V., Eastman, S., Al-Mamoori, A. A., Hajari, A., Rownaghi, A. A., & Rezaei, F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16732 · Cited by 152
Zhao, P., Zhang, G., Yan, H., & Zhao, Y. (2020) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2020.11.028 · Cited by 89
Ghaemi, A., Dehnavi, M. K., & Khoshraftar, Z. (2023) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2023.100310 · Cited by 66
Solid‐waste‐Derived carbon dioxide‐capturing materials
Wang, J., Yang, Y., Jia, Q., Shi, Y., Guan, Q., Yang, N., Ning, P., & Wang, Q. (2019) · ChemSusChem · doi:10.1002/cssc.201802655 · Cited by 60
Characterization and evaluation of low-cost biomass-based-AC for CO2 capture: A review
Khoshraftar, Z., Masoumi, H., & Ghaemi, A. (2023) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2023.100373 · Cited by 41
Huang, P., Wei, X., Wang, X., Gu, Z., Guo, Y., & Zhao, C. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143629 · Cited by 35
Steam-Stable Basic Immobilized Amine Sorbent Pellets for CO2 Capture Under Practical Conditions
Wilfong, W. C., Kail, B. W., Howard, B., Wang, Q., Shi, F., Ji, T., & Gray, M. L. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b13771 · Cited by 26
Self-citationLiu, Q., Kong, Y., Sun, Z., Liu, Z., & Shen, X. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.112913 · Cited by 24
Dai, X., Theppitak, S., & Yoshikawa, K. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b03372 · Cited by 20
Wilfong, W. C., Kail, B. W., Wang, Q., Ji, T., Kusuma, V. A., Shah, P. S., Fusco, N., Yi, S., Shi, F., & Gray, M. L. (2021) · Powder Technology · doi:10.1016/j.powtec.2021.09.056 · Cited by 13
Self-citationWilfong, W. C., Kail, B. W., Howard, B., de Aquino, T. F., Estevam, S. T., & Gray, M. L. (2016) · Energy Technology · doi:10.1002/ente.201600319 · Cited by 13
Self-citationKong, Y., Tan, Z., Tang, F., & Shen, X. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.166295 · Cited by 12
Green adsorbent for CO2 adsorption: MgO impregnated palm kernel shell-based activated carbon
Gopalan, J., Raman, A. A. A., & Buthiyappan, A. (2024) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-023-05418-2 · Cited by 12
Li, S., Wilfong, W. C., Wang, Q., Chen, Y., Jiang, C., Stuckman, M. Y., Tang, Y., Hu, J., & Shi, F. (2025) · Energy & Fuels · doi:10.1021/acs.energyfuels.5c03490 · Cited by 10
Self-citationRong, Z., Qi, L., Xu, X., Zhang, L., Liu, Q., Fei, Z., Xia, M., Cui, M., & Qiao, X. (2024) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2024.124747 · Cited by 5
Supported superbase shaped solid sorbents for CO2 capture
Singh, B., Gorji, Z. E., Koivula, R., & Repo, T. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.164438 · Cited by 5
Experimental and modelling studies of CO2/N2 mixture separations using amine functionalised silicas
Tsalaporta, E., Brady, N., & MacElroy, J. M. D. (2017) · Adsorption · doi:10.1007/s10450-017-9896-z · Cited by 5
Estévez-Jácome, J., Argáez, C., Ramírez-Zamora, R.-M., & Alcántar-Vázquez, B. C. (2022) · Reaction Chemistry & Engineering · doi:10.1039/d2re00077f · Cited by 4
Kim, Y., Park, D. H., Lee, G., Hwang, J., & Han, B. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.167307 · Cited by 3
Recent advances in additive manufacturing for solid adsorbent materials in carbon capture
Tan, L., Yu, B., Huo, C., Hao, X., Hu, Z., Xie, T., Tian, X., Yang, B., & Wu, Z. (2025) · Additive Manufacturing Frontiers · doi:10.1016/j.amf.2025.200253 · Cited by 2
Zhou, T., Wen, Y., Wu, Z., Liu, B., Bi, Y., Ma, X., Du, Z., Feng, X. F., Lu, X., Ji, T., et al. (2025) · AIChE Journal · doi:10.1002/aic.70202 · Cited by 1
Khan, N. A., Ahmad, H., Syed, N. U. H., Ahmad, B., Khan, S., & Ismail, H. (2024) · University of Wah Journal of Science and Technology (UWJST) · doi:10.56220/uwjst.v8i.158 · Cited by 1
Lu, Y., Zou, J., Tan, L., Chen, H., Lin, J., Huang, L., Shen, X., Zhang, Z., & Yan, F. (2026) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2026.148882 · Cited by 1
Rong, Z., Qi, L., Xu, X., Li, Z., Liu, Q., Fei, Z., Xia, M., Zhang, Z., Cui, M., & Qiao, X. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4610552
Feedstock-Driven Design of CO2 Sorbents via Chemical Upcycling of Plastics and Elastomers
Lee, S., Park, G., Gragasin, L. K. D., & Hong, S. H. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c14604
Metadata
- Authors
- Wilfong, W. C., Gray, M. L., Kail, B. W., & Howard, B. H.
- Affiliations
- National Energy Technology Laboratory (US)
- United States Department of Energy (US)
- Corresponding author
- Wilfong, Walter Christopher
- Venue
- Energy Technology
- Publisher
- Wiley
- Published
- 2016-01-27
- Volume
- 4
- Issue
- 5
- Pages
- 610-619
- ISSN
- 2194-4288 (ISSN-L)
- 2194-4296
- OpenAlex
- W2399773380
- Cited by
- 27
- References
- 44
- Citations by year
- 2026: 2 · 2025: 6 · 2024: 4 · 2023: 4 · 2022: 2 · 2021: 1 · 2020: 1 · 2019: 3 · 2018: 1 · 2017: 2 · 2016: 1
- FWCI
- 2.08
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Energy Technology (publishedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- U.S. Department of Energy (DE-FE0004000)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Keywords
- CO2 capture, amine sorbents, pelletization, coal fly ash, polyvinyl chloride, tetraethylenepentamine, polymer binders, hydrogen bonding, pellet strength, ammonium formation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.