Quality control in fast pyrolysis bio‐oil production and use
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Introducing a new fuel, fast pyrolysis bio‐oil, into the market is not without its challenges. Fast pyrolysis bio‐oil is different from conventional liquid fuels, and therefore must overcome both technical and marketing hurdles. To standardize the bio‐oil quality on the market, specifications are needed and in order to promote its acceptance as a fuel, the methodology should be as similar to that for mineral oils as possible. In the EU a new chemical regulation system is being implemented. The regulation applies to substances manufactured in or imported to the EU in annual quantities of one tonne or more per company. This article will focus on norms and standards for fast pyrolysis bio‐oils. It will include the present status and address what still has to be done on bio‐oil specifications and relevant test methods. The article will address industrial needs in commercialization of the fuel oil use of bio‐oil, including the registration application to the REACH program, as well as development of a standard within ASTM. The article will discuss the most important properties of bio‐oil and the variation in these properties. It will address the issue of quality follow‐up in bio‐oil production, including the properties to be followed and the laboratory and on‐line monitoring methods. The article will provide a state of the art of fuel oil specifications, test methods, and testing procedures as they are applied to bio‐oil. It will review the effort in support of the implementation of an ASTM standard including the methods validation work. © 2009 American Institute of Chemical Engineers Environ Prog, 2009
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils
Diebold, J. P. (1999) · doi:10.2172/753818 · Cited by 549
Cited by
A comprehensive review on the pyrolysis of lignocellulosic biomass
Dhyani, V., & Bhaskar, T. (2018) · Renewable Energy · doi:10.1016/j.renene.2017.04.035 · Cited by 1,545
Fast pyrolysis technology development
Venderbosch, R., & Prins, W. (2010) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.205 · Cited by 552
Hoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading
Butler, E., Devlin, G., Meier, D., & McDonnell, K. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.035 · Cited by 471
State-of-the-art of fast pyrolysis in IEA bioenergy member countries
Meier, D., van de Beld, B., Bridgwater, A. V., Elliott, D. C., Oasmaa, A., & Preto, F. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.061 · Cited by 295
Self-citationA perspective on oxygenated species in the refinery integration of pyrolysis oil
Talmadge, M. S., Baldwin, R. M., Biddy, M. J., McCormick, R. L., Beckham, G. T., Ferguson, G. A., Czernik, S., Magrini-Bair, K. A., Foust, T. D., Metelski, P. D., et al. (2014) · Green Chem. · doi:10.1039/c3gc41951g · Cited by 272
Biomass pyrolysis technologies for value-added products: a state-of-the-art review
Amenaghawon, A. N., Anyalewechi, C. L., Okieimen, C. O., & Kusuma, H. S. (2021) · Environment, Development and Sustainability · doi:10.1007/s10668-021-01276-5 · Cited by 260
Pacific Northwest National Laboratory (PNNL), R., Jones, S., USDOE, & Male, J. (2012) · doi:10.2172/1071990 · Cited by 34
Metadata
- Authors
- Oasmaa, A., Elliott, D. C., & Müller, S.
- Venue
- Environmental Progress & Sustainable Energy
- Publisher
- Wiley
- Published
- 2009-08-12
- Volume
- 28
- Issue
- 3
- Pages
- 404-409
- ISSN
- 1944-7442 (ISSN-L)
- 1944-7450
- OpenAlex
- W2007667918
- Cited by
- 107
- References
- 1
- FWCI
- 3.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.