The DOI matches its Crossref record.
Ultracapacitor technologies and application in hybrid and electric vehicles
Open accessAbstract
This paper focuses on ultracapacitors (electrochemical capacitors) as energy storage in vehicle applications and thus evaluates the present state-of-the-art of ultracapacitor technologies and their suitability for use in electric and hybrid drivelines of various types of vehicles. A key consideration in determining the applicability of ultracapacitors for a particular vehicle application is the proper assessment of the energy storage and power requirements. For hybrid–electric vehicles, the key issues are the useable energy requirement and the maximum pulse power at high efficiency. For a Prius size vehicle, if the useable energy storage is about 125 Wh and needed efficiency is 90–95%, analysis shown in this paper indicate that vehicles can be designed using carbon ultracapacitors (both carbon/carbon and hybrid carbon) that yield high fuel economy improvements for all driving cycles and the cost of the ultracapacitors can be competitive with lithium-ion batteries for high volume production and carbon prices of less than $20 kg−1. The use of carbon/carbon devices in micro-hybrids is particularly attractive for a control strategy (sawtooth) that permits engine operation near its maximum efficiency using only a 6 kW electric motor. Vehicle projects in transit buses and passenger cars have shown that ultracapacitors have functioned as expected and significant fuel economy improvements have been achieved that are higher than would have been possible using batteries because of the higher round-trip efficiencies of the ultracapacitors. Ultracapacitors have particular advantages for use in fuel cell powered vehicles in which it is likely they can be used without interface electronics. Development of hybrid carbon devices is continuing showing energy densities of 12 Wh kg−1 and a high efficiency power density of about 1000 W kg−1. Vehicle simulations using those devices have shown that increased power capability in such devices is needed before full advantage can be taken of their increased energy density compared with carbon/carbon devices in some vehicle applications. Energy storage system considerations indicate that combinations of ultracapacitors and advanced batteries (Wh kg−1>200) are likely to prove advantageous in the future as such batteries are developed. This is likely to be the case in plug-in hybrids with high-power electric motors for which it may be difficult to limit the size and weight of the energy storage unit even using advanced batteries. Copyright © 2009 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of energy sources and energy management system in electric vehicles
Tie, S. F., & Tan, C. W. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.077 · Cited by 1,463
Hybrid nanostructured materials for high-performance electrochemical capacitors
Yu, G., Xie, X., Pan, L., Bao, Z., & Cui, Y. (2013) · Nano Energy · doi:10.1016/j.nanoen.2012.10.006 · Cited by 1,103
Novel insight into neutral medium as electrolyte for high-voltage supercapacitors
Fic, K., Lota, G., Meller, M., & Frackowiak, E. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02262h · Cited by 818
Kate, R. S., Khalate, S. A., & Deokate, R. J. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.10.262 · Cited by 574
Emerging electrochemical energy conversion and storage technologies
Badwal, S. P. S., Giddey, S. S., Munnings, C., Bhatt, A. I., & Hollenkamp, A. F. (2014) · Frontiers in Chemistry · doi:10.3389/fchem.2014.00079 · Cited by 478
Developments of electric cars and fuel cell hydrogen electric cars
Wilberforce, T., El-Hassan, Z., Khatib, F. N., Al Makky, A., Baroutaji, A., Carton, J. G., & Olabi, A. G. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.07.054 · Cited by 478
Dutta, A., Mitra, S., Basak, M., & Banerjee, T. (2023) · Energy Storage · doi:10.1002/est2.339 · Cited by 472
Fuel cell hybrid electric vehicles: A review on power conditioning units and topologies
Das, H. S., Tan, C. W., & Yatim, A. H. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.056 · Cited by 463
Asymmetric electrochemical capacitors—Stretching the limits of aqueous electrolytes
Long, J. W., Bélanger, D., Brousse, T., Sugimoto, W., Sassin, M. B., & Crosnier, O. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.137 · Cited by 416
Recent Progress in Ruthenium Oxide‐Based Composites for Supercapacitor Applications
Majumdar, D., Maiyalagan, T., & Jiang, Z. (2019) · ChemElectroChem · doi:10.1002/celc.201900668 · Cited by 340
A Review for Aqueous Electrochemical Supercapacitors
Zhao, C., & Zheng, W. (2015) · Frontiers in Energy Research · doi:10.3389/fenrg.2015.00023 · Cited by 266
An overview and prospective on Al and Al-ion battery technologies
Elia, G. A., Kravchyk, K. V., Kovalenko, M. V., Chacón, J., Holland, A., & Wills, R. G. A. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228870 · Cited by 263
Recent advances in porous graphene materials for supercapacitor applications
Zhang, X., Zhang, H., Li, C., Wang, K., Sun, X., & Ma, Y. (2014) · RSC Adv. · doi:10.1039/c4ra07869a · Cited by 262
Omar, N., Daowd, M., Bossche, P. V. D., Hegazy, O., Smekens, J., Coosemans, T., & Mierlo, J. V. (2012) · Energies · doi:10.3390/en5082952 · Cited by 178
Metadata
- Authors
- Burke, A.
- Venue
- International Journal of Energy Research
- Publisher
- Hindawi Limited
- Published
- 2009-12-17
- Volume
- 34
- Issue
- 2
- Pages
- 133-151
- ISSN
- 0363-907X (ISSN-L)
- OpenAlex
- W2020174268
- Cited by
- 194
- References
- 0
- FWCI
- 25.12
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.