The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Oxy-fuel combustion technology: current status, applications, and trends
Open accessAbstract
The increased level of emissions of carbon dioxide into the atmosphere due to burning of fossil fuels represents one of the main barriers toward the reduction of greenhouse gases and the control of global warming. In the last decades, the use of renewable and clean sources of energies such as solar and wind energies has been increased extensively. However, due to the tremendously increasing world energy demand, fossil fuels would continue in use for decades which necessitates the integration of carbon capture technologies (CCTs) in power plants. These technologies include oxycombustion, pre-combustion, and post-combustion carbon capture. Oxycombustion technology is one of the most promising carbon capture technologies as it can be applied with slight modifications to existing power plants or to new power plants. In this technology, fuel is burned using an oxidizer mixture of pure oxygen plus recycled exhaust gases (consists mainly of CO2). The oxycombustion process results in highly CO2-concentrated exhaust gases, which facilitates the capture process of CO2 after H2O condensation. The captured CO2 can be used for industrial applications or can be sequestrated. The current work reviews the current status of oxycombustion technology and its applications in existing conventional combustion systems (including gas turbines and boilers) and novel oxygen transport reactors (OTRs). The review starts with an introduction to the available CCTs with emphasis on their different applications and limitations of use, followed by a review on oxycombustion applications in different combustion systems utilizing gaseous, liquid, and coal fuels. The current status and technology readiness level of oxycombustion technology is discussed. The novel application of oxycombustion technology in OTRs is analyzed in some details. The analyses of OTRs include oxygen permeation technique, fabrication of oxygen transport membranes (OTMs), calculation of oxygen permeation flux, and coupling between oxygen separation and oxycombustion of fuel within the same unit called OTR. The oxycombustion process inside OTR is analyzed considering coal and gaseous fuels. The future trends of oxycombustion technology are itemized and discussed in details in the present study including: (i) ITMs for syngas production; (ii) combustion utilizing liquid fuels in OTRs; (iii) oxy-combustion integrated power plants and (iv) third generation technologies for CO2 capture. Techno-economic analysis of oxycombustion integrated systems is also discussed trying to assess the future prospects of this technology. Copyright © 2017 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281 · cited 1×
“Technologies for carbon dioxide capturing and sequestration, including oxyfuel combustion, are important means for CO2 emissions reduction while satisfying the everincreasing global energy demand [82,83].”
BackgroundCO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611 · cited 1×
“Both pressure swing adsorption (PSA) and temperature swing adsorption (TSA) can be used to desorb CO2 and regenerate the adsorbent [43].”
BackgroundOxy-fuel combustion technology for coal-fired power generation
Buhre, B. J. P., Elliott, L. K., Sheng, C. D., Gupta, R. P., & Wall, T. F. (2005) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2005.07.001 · Cited by 1,542
Padurean, A., Cormos, C.-C., & Agachi, P.-S. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.12.007 · Cited by 228
Izquierdo, U., Barrio, V. L., Cambra, J. F., Requies, J., Güemez, M. B., Arias, P. L., Kolb, G., Zapf, R., Gutiérrez, A. M., & Arraibi, J. R. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.11.048 · Cited by 141
Cited by
Salaudeen, S. A., Acharya, B., & Dutta, A. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.11.012 · Cited by 253
Carbon Capture Technologies: A Review on Technology Readiness Level
Hekmatmehr, H., Esmaeili, A., Pourmahdi, M., Atashrouz, S., Abedi, A., Ali Abuswer, M., Nedeljkovic, D., Latifi, M., Farag, S., & Mohaddespour, A. (2024) · Fuel · doi:10.1016/j.fuel.2024.130898 · Cited by 189
Feizi-Afshar, B., Vafajoo, L., & Farzi, A. (2026) · Results in Chemistry · doi:10.1016/j.rechem.2025.102921 · Cited by 4
Metadata
- Authors
- Nemitallah, M. A., Habib, M. A., Badr, H. M., Said, S. A., Jamal, A., Ben-Mansour, R., Mokheimer, E. M. A., & Mezghani, K.
- Venue
- International Journal of Energy Research
- Publisher
- Wiley
- Published
- 2017-02-08
- Volume
- 41
- Issue
- 12
- Pages
- 1670-1708
- ISSN
- 0363-907X (ISSN-L)
- OpenAlex
- W2586072272
- Cited by
- 186
- References
- 5
- FWCI
- 7.17
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Oxy-fuel combustion technology: current status, applications, and trends. https://app.cochat.ai/papers/10.1002/er.3722
- The paper
- Nemitallah, M. A., Habib, M. A., Badr, H. M., Said, S. A., Jamal, A., Ben-Mansour, R., Mokheimer, E. M. A., & Mezghani, K. (2017). Oxy-fuel combustion technology: current status, applications, and trends. International Journal of Energy Research. https://doi.org/10.1002/er.3722
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.