Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 167

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Nitrogen‐doping activated biomass carbon from tea seed shell for CO 2 capture and supercapacitor

Quan, Cui, Jia, Xiangyu, Gao, Ningbo · 2020 · International Journal of Energy Research

Abstract

Activated carbon is a promising material that has a broad application prospect. In this work, biomass (tea seed shell) was used to prepare activated carbon with KOH activation (referred to as AC), and nitrogen was doped in activated carbon using melamine as the nitrogen source (referred to as NAC-x, where x is the mass ratio of melamine and activated carbon). The obtained activated biomass carbon (activated bio-carbon) samples were characterized by Brunauer–Emmett–Teller (BET)-specific surface area analysis, ultimate analysis, X-ray photoelectron spectroscopy (XPS) analysis, Raman spectrum analysis, and X-ray diffraction (XRD) patterns. The specific surface areas of activated bio-carbons were 1503.20 m2/g (AC), 1064.54 m2/g (NAC-1), 1187.93 m2/g (NAC-2), 1055.32 m2/g (NAC-3), and 706.22 m2/g (NAC-4), revealing that nitrogen-doping process leads to decrease in specific surface area. XPS analysis revealed that the main nitrogen-containing functional groups were pyrrolic-N and pyridinic-N. The capacity of CO2 capture and electrochemical performance of activated bio-carbon samples were investigated. The CO2 capturing capacity followed this order: AC (3.15 mmol/g) > NAC-2 (2.75 mmol/g) > NAC-1 (2.69 mmol/g) > NAC-3 (2.44 mmol/g) > NAC-4 (1.95 mmol/g) at 298 K at 1 bar, which is consistent with the order of specific surface area. The specific surface area played a dominant role in CO2 capturing capacity. As for supercapacitor, AC-4 showed the highest specific capacitance (168 F/g) at the current density of 0.5 A/g, but NAC-2 showed the best electrochemical performance (89 F/g) at 2 A/g. Nitrogen-containing functional groups and specific surface area both had an important impact on electrochemical performance. In general, NAC-3 and NAC-2 produced excellent electrochemical performance. Compared with NAC-3, less melamine was used to prepare NAC-2; therefore, NAC-2 was considered as the best activated bio-carbon for supercapacitor for 141 F/g (at 0.5 A/g), 108 F/g (at 1 A/g), and 89 F/g (at 2 A/g) in this work.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/er.5017

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 2 references

Cited by

Metadata

Authors
Quan, C., Jia, X., & Gao, N.
Venue
International Journal of Energy Research
Publisher
Wiley
Published
2019-11-21
Volume
44
Issue
2
Pages
1218-1232
ISSN
  • 0363-907X (ISSN-L)
  • 1099-114X
OpenAlex
W2991024864
Cited by
167
References
2
FWCI
9.21
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.