The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Numerical investigation of a new combined energy system includes parabolic dish solar collector, Stirling engine and thermoelectric device
Open accessAbstract
According to new findings, the use of clean energy sources such as solar energy to supply energy (both electricity and heat) to human societies is essential. On the other hand, choosing the appropriate technology to convert solar energy into useful energy in the form of individual or combined systems is a fundamental issue. Individual solar energy systems have inherently low performance. However, their use in hybrid energy systems with other energy generation devices is key solution and shows high performance. The present work provides the performance of a new combined energy system composed of the parabolic dish solar collector (PDC), Stirling engine (SE) and thermoelectric device (TD) under various parameters. Sun is the main source of energy in this system, where, sunlight is focused on the PDC focal point by the parabolic shaped mirrors. Thus, the useful thermal power is produced by PDC and then feeds to the SE. The operating fluid of the engine is heated by this heat and converted into mechanical energy. Then, the mechanical energy is converted into electricity by a generator connected to the SE and the excess heat is lost from the engine. The exhaust of the SE transferred to the TEG hot end and produces further electricity. In addition, the TEC module absorbs the cooled environment heat and produces cooling energy (by consuming electricity from the TEG). Therefore, the proposed combined process provides the electricity, heat and cooling. The paper is based on the following three scenarios: (1) the system performance is evaluated under constant climatic conditions, (2) climate data from five various cities in Europe and Asia are used for system operation and (3) this scenario presents the general comparison between the two different hybrid energy systems driven by PDC and linear Fresnel reflector (LFR). In addition, multi-objective optimization is provided to obtain the optimal performance of the developed hybrid system. The optimization results showed that, the optimum total output electricity and overall efficiency were 26.21 kW and 39.17%, respectively. It was also found that, average daily useful power generated by PDC in Moscow on 14-June is 373.97 W/m2, which is about 11.1%, 1.55%, 33.3% and 14.23% more than Tehran, Beijing, Geneva and Kiev, respectively. Furthermore, increasing the temperature of PDC absorber improves the performance of SE and TD and subsequently improves the overall operation. Also, in terms of the PDC numbers, the system in the cities of Tehran, Beijing and Moscow has a better justification compared to the other two cities (Geneva and Kiev).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Holland, J. H. (1992) · The MIT Press eBooks · doi:10.7551/mitpress/1090.001.0001 · Cited by 47,002
Multi-objective optimization using genetic algorithms: A tutorial
Konak, A., Coit, D. W., & Smith, A. E. (2006) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2005.11.018 · Cited by 3,440
Liu, J., Chen, C., Liu, Z., Jermsittiparsert, K., & Ghadimi, N. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101057 · Cited by 335
Self-citationAhmadi, M. H., Sayyaadi, H., Dehghani, S., & Hosseinzade, H. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.06.025 · Cited by 247
Optimization of solar-powered Stirling heat engine with finite-time thermodynamics
Li, Y., Ya-Ling, H., & Weiwei, W. (2010) · Renewable Energy · doi:10.1016/j.renene.2010.06.037 · Cited by 188
Ahmadi, M. H., Ahmadi, M. A., Mellit, A., Pourfayaz, F., & Feidt, M. L. (2015) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2015.11.042 · Cited by 125
Review on solar Stirling engine: Development and performance
Singh, U. R., & Kumar, A. (2018) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2018.08.016 · Cited by 120
Marefati, M., & Mehrpooya, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118247 · Cited by 120
Self-citationMarefati, M., Mehrpooya, M., & Shafii, M. B. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.01.002 · Cited by 113
Self-citationCheng, S., Zhao, G., Gao, M., Shi, Y., Huang, M., & Marefati, M. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.11.282 · Cited by 112
Self-citation
Cited by
Li, Y., & Liu, Q. (2021) · Energy Reports · doi:10.1016/j.egyr.2021.08.126 · Cited by 725
Sadeghian, O., Oshnoei, A., Mohammadi-ivatloo, B., Vahidinasab, V., & Anvari-Moghaddam, A. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105241 · Cited by 424
Smart city and cyber-security; technologies used, leading challenges and future recommendations
Ma, C. (2021) · Energy Reports · doi:10.1016/j.egyr.2021.08.124 · Cited by 183
Huang, W., & Fooladi, H. (2021) · Energy Reports · doi:10.1016/j.egyr.2021.07.036 · Cited by 44
Metadata
- Authors
- Mehrpooya, M., Ghadimi, N., Marefati, M., & Ghorbanian, S. A.
- Venue
- International Journal of Energy Research
- Publisher
- Wiley
- Published
- 2021-06-02
- Volume
- 45
- Issue
- 11
- Pages
- 16436-16455
- ISSN
- 0363-907X (ISSN-L)
- 1099-114X
- OpenAlex
- W3171074139
- Cited by
- 256
- References
- 26
- FWCI
- 10.23
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Numerical investigation of a new combined energy system includes parabolic dish solar collector, Stirling engine and thermoelectric device. https://app.cochat.ai/papers/10.1002/er.6891
- The paper
- Mehrpooya, M., Ghadimi, N., Marefati, M., & Ghorbanian, S. A. (2021). Numerical investigation of a new combined energy system includes parabolic dish solar collector, Stirling engine and thermoelectric device. International Journal of Energy Research. https://doi.org/10.1002/er.6891
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.