Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 113Metal-Organic Frameworks: Synthesis and ApplicationsElectrocatalysts for Energy ConversionSupercapacitor Materials and Fabrication

The DOI matches its Crossref record; 40 of the 42 references it cites were found in a registry or an index; 1 of the 17 sources its claims cite were checked for support.

Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis

Open access

Abstract

AbstractApplications for metal–organic frameworks (MOFs) demand their assembly into three‐dimensional (3D) macroscopic architectures. The capability of sustaining structural integrity with considerable deformation is important to allow a monolithic material to work reliably. Nevertheless, it remains a significant challenge to introduce superplasticity in 3D MOF networks. Here, we report a general procedure for synthesizing 3D superplastic MOF aerogels inspired by the hierarchical architecture of natural corks. The resultant MOFs exhibited excellent superplasticity that can recover fully and rapidly to its original dimension after 50% strain compression and unloading for >2000 cycles. The 3D superplastic architecture is achieved by successively assembling one‐dimensional (1D) to two‐dimensional (2D) and then 3D, in a variety of MOFs with different transition metal active sites (Co‐, NiMn‐, NiCo‐, NiCoMn‐) and organic ligands (2‐thiophenecarboxylic acid and glutaric acid). Latent applications have been demonstrated for NiMn‐MOF aerogels to serve as a new generation of flexible electrocatalysts for hydrogen evolution reaction (HER) from seawater splitting, which requires a low overpotential of 243 mV to achieve a current density of 10 mA·cm−2. Notably, the electrocatalyst remains stable even being deformed, as the overpotential to achieve a current density of 10 mA·cm−2 increases slightly to 270, 264, and 258 mV after one‐, two‐, and threefold, respectively. In great contrast, traditional MOF powder‐electrodes demonstrate significant activity decay under similar conditions. This work opens up enormous opportunities for exploring new applications of MOFs in a freestanding, structurally adaptive, and macroscopic form.

Overview

CoChat Summary

TL;DR

The paper reports a two-step, cork-inspired assembly of 1D metal–organic framework (MOF) nanobelts into 3D superplastic MOF aerogels, with NiMn-MOF aerogels tested as flexible electrocatalysts for hydrogen evolution from seawater. The aerogel recovers after 50% strain compression over >2000 cycles and requires ∼243 mV overpotential at 10 mA·cm−2 in natural seawater, with only slight activity change after deformation.

Key findings

  • 3D MOF aerogels show superplasticity: after 50% strain compression they restore original shape within 1 s, and after 2000 compression–resilience cycles only negligible deformation remains—8.3% for Co-MOF, 2.9% for NiMn-MOF, and 3.8% for NiCoMn-MOF.
  • The general method assembles 1D nanobelts into 2D sheets and then 3D aerogels across Co-, NiMn-, NiCo-, NiCoMn-MOFs and Ni-MIL-77; NiMn-MOF has a mass density of 3.6 mg·cm−3, nanobelts ∼400 nm wide and tens of micrometers long, and a (200) lattice spacing of 1.37 nm.
  • NiMn-MOF is an active HER electrocatalyst in natural seawater: ∼243 mV overpotential at 10 mA·cm−2 and ∼341 mV at 200 mA·cm−2; after one-, two-, and threefold deformation, overpotentials at 10 mA·cm−2 are 270, 264, and 258 mV, and at 200 mA·cm−2 are 364, 372, and 394 mV.
  • DFT gives ΔG_H* of −0.709 eV for Ni sites in NiMn-MOF, versus 0.991 eV for Mn and −1.51 eV for O; NiMn-MOF’s ΔG_H* is smaller than Ni-MOF (1.10 eV) and Mn-MOF (2.65 eV). NiMn-MOF conductivity is 2.09 ± 0.64 S·m−1, higher than Ni-MOF (0.23 ± 0.05 S·m−1), NiMn-MOF 25% (0.73 ± 0.21 S·m−1), NiMn-MOF 80% (1.60 ± 0.23 S·m−1), and Mn-MOF (0.63 ± 0.23 S·m−1).

Methods

  • Synthesis: NiMn-MOF nanobelts were prepared hydrothermally at 150 °C from nickel and manganese acetate salts with 2-thiophenecarboxylic acid in ethanol, with reaction intermediates examined by tuning durations; 3D aerogels were then formed by freeze-drying aqueous nanobelt dispersions, with slow freezing (5 °C·min−1) producing ordered 2D sheets and honeycomb-like 3D architectures.
  • Characterization and testing: SEM, TEM, XRD, XPS, elemental analysis, ICP-OES, TGA, FT-IR, Zeta potential, N2 isotherms, conductivity measurements, and compression–resilience cycling; DFT was used for ΔG_H* and density of states.
  • Electrochemistry: HER was tested in simulated seawater (3 wt% NaCl) and natural seawater collected from the Yellow Sea in Qingdao, China; NiMn-MOF electrodes were made by adding nickel foam during the second freeze-drying step, and performance was assessed by LSV, Tafel slopes, EIS, and chronopotentiometry before and after deformation.

Limitations

  • The paper states no limitations section. Evident from the text: the HER mechanism relies on DFT calculations for selected Ni, Mn, and O sites and comparisons among MOFs, without in situ or operando mechanistic evidence.
  • Natural seawater testing used one collection site (Yellow Sea, Qingdao, China) and simulated seawater at 3 wt% NaCl; the chronopotentiometric stability test at 10 mA·cm−2 is reported without a stated duration.
  • Mechanical cycling is reported as 2000 cycles for Co-, NiMn-, and NiCoMn-MOF aerogels, while Ni-MIL-77 aerogel is reported only for 10-cycle testing.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1002/exp.20210021

Cites

40 of 40 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

FIGURE 1 Synthesis of nickel, manganese–metal–organic framework aerogels. (A–C) SEM images and scheme of NiMn‐MOF synthesis from aqueous dispersion with concentration of (A) 0.87 mg·mL−1, (B) 3.6 mg·mL−1, and (C) 5.9 mg·mL−1 (scale bars for panels A, B, and C are 30, 30, and 20 µm, respectively); (D) SEM images of reaction intermediates collected at different reaction durations during NiMn‐MOF synthesis (scale bar: 1 µm)
FIGURE 1 Synthesis of nickel, manganese–metal–organic framework aerogels. (A–C) SEM images and scheme of NiMn‐MOF synthesis from aqueous dispersion with concentration of (A) 0.87 mg·mL−1, (B) 3.6 mg·mL−1, and (C) 5.9 mg·mL−1 (scale bars for panels A, B, and C are 30, 30, and 20 µm, respectively); (D) SEM images of reaction intermediates collected at different reaction durations during NiMn‐MOF synthesis (scale bar: 1 µm)CC BY · PubMed Central
FIGURE 2 Morphological and structural characterizations of nickel, manganese–metal–organic framework aerogels. (A–C) SEM images (scale bars for panels A, B, and C are 100 µm, 20 µm, and 200 nm), inset of (A) is an optical image (scale bar: 1 cm); (D,E) TEM images (scale bars in panels D and E are 20 and 5 nm, respectively); (F) FFT image of panel D; (G) TEM element mappings of Ni, Mn, S, O, and C (scale bar: 500 nm); (H) Experimental and simulated XRD patterns; (I) FT‐IR spectra; (J) Electrical conductivity of NiMn‐MOF synthesized from different manganese feeding percentages; (K) Density of states
FIGURE 2 Morphological and structural characterizations of nickel, manganese–metal–organic framework aerogels. (A–C) SEM images (scale bars for panels A, B, and C are 100 µm, 20 µm, and 200 nm), inset of (A) is an optical image (scale bar: 1 cm); (D,E) TEM images (scale bars in panels D and E are 20 and 5 nm, respectively); (F) FFT image of panel D; (G) TEM element mappings of Ni, Mn, S, O, and C (scale bar: 500 nm); (H) Experimental and simulated XRD patterns; (I) FT‐IR spectra; (J) Electrical conductivity of NiMn‐MOF synthesized from different manganese feeding percentages; (K) Density of statesCC BY · PubMed Central
FIGURE 3 Mechanical property demonstration of metal–organic framework aerogels. (A–C) Co‐MOF aerogels; (D–F) NiMn‐MOF aerogels; (G–I) NiCoMn‐MOF aerogels; (A,D,G) Optical images (scale bar: 1 cm); (B,E,H) SEM images (scale bar: 10 µm); (C,F,I) Compression‐unloading performance
FIGURE 3 Mechanical property demonstration of metal–organic framework aerogels. (A–C) Co‐MOF aerogels; (D–F) NiMn‐MOF aerogels; (G–I) NiCoMn‐MOF aerogels; (A,D,G) Optical images (scale bar: 1 cm); (B,E,H) SEM images (scale bar: 10 µm); (C,F,I) Compression‐unloading performanceCC BY · PubMed Central
FIGURE 4 Electrocatalytic performance and mechanism study of HER from natural seawater electrolysis. (A) LSV curves of NiMn‐MOF electrode with different folding times; (B) Overpotentials to achieve different current densities; (C) Tafel plots; (D) EIS plots; (E) Stability testing for 12 h, inset of panel (E) shows optical images of catalyst electrodes with different folding times; (F) LSV curves of NiMn‐MOF before and after stability tests, inset of (F) is the EIS plot; (G) Zeta potentials in relation to feeding ratios (w/w) of metal salts (Ni and Mn) to synthesize NiMn‐MOF; (H) Gibbs energy diagrams of HER catalyzed by different active sites in NiMn‐MOF; (I) Gibbs energy diagrams of HER promoted by NiMn‐MOF, Ni‐MOF, and Mn‐MOF
FIGURE 4 Electrocatalytic performance and mechanism study of HER from natural seawater electrolysis. (A) LSV curves of NiMn‐MOF electrode with different folding times; (B) Overpotentials to achieve different current densities; (C) Tafel plots; (D) EIS plots; (E) Stability testing for 12 h, inset of panel (E) shows optical images of catalyst electrodes with different folding times; (F) LSV curves of NiMn‐MOF before and after stability tests, inset of (F) is the EIS plot; (G) Zeta potentials in relation to feeding ratios (w/w) of metal salts (Ni and Mn) to synthesize NiMn‐MOF; (H) Gibbs energy diagrams of HER catalyzed by different active sites in NiMn‐MOF; (I) Gibbs energy diagrams of HER promoted by NiMn‐MOF, Ni‐MOF, and Mn‐MOFCC BY · PubMed Central

Verification

Claims the paper makes

1 Valid · 1 Not valid · 5 Not checked · 47 Own results and interpretations

20 more claims

Create a free account to see all 54 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 23
  • Probably not a substantial claim. 6

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

2 of 2

Citations

Cites

Show all 42 references

Cited by

See all 113

Metadata

Authors
Sun, Y., Xu, S., Ortíz‐Ledón, C. A., Zhu, J., Chen, S., & Duan, J.
Affiliations
  • Nanjing University of Science and Technology (CN)
  • University of Wisconsin–Madison (US)
Corresponding author
  • Zhu, Junwu
  • Chen, Sheng
  • Duan, Jingjing
Venue
Exploration
Publisher
Wiley
Published
2021-09-23
Volume
1
Issue
2
Pages
20210021-20210021
ISSN
2766-2098 (ISSN-L)
OpenAlex
W3204697061
Cited by
113
References
42
Citations by year
2026: 7 · 2025: 16 · 2024: 25 · 2023: 23 · 2022: 37 · 2021: 5
FWCI
7.27
Type
journal article
Language
en
Open access
Locations
  • Exploration (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders
  • Natural Science Foundation of Jiangsu Province (BK20190460)
  • Fundamental Research Funds for the Central Universities (30921013103, 30920041113)
Topics
  • Physical Sciences › Chemistry › Inorganic Chemistry › Metal-Organic Frameworks: Synthesis and Applications
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Supercapacitor Materials and Fabrication
Keywords
metal-organic frameworks, superplasticity, biomimetic assembly, hydrogen evolution reaction, seawater electrolysis, strain recovery, 2-thiophenecarboxylic acid, glutaric acid, cobalt MOF, nickel MOF

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis. https://app.cochat.ai/papers/10.1002/exp.20210021
The paper
Sun, Y., Xu, S., Ortíz‐Ledón, C. A., Zhu, J., Chen, S., & Duan, J. (2021). Biomimetic assembly to superplastic metal–organic framework aerogels for hydrogen evolution from seawater electrolysis. Exploration. https://doi.org/10.1002/exp.20210021

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.