The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
High Molecular Weight Polybenzimidazole Membranes for High Temperature PEMFC
Abstract
High temperature operation of proton exchange membrane fuel cells under ambient pressure has been achieved by using phosphoric acid doped polybenzimidazole (PBI) membranes. To optimize the membrane and fuel cells, high performance polymers were synthesized of molecular weights from 30 to 94 kDa with good solubility in organic solvents. Membranes fabricated from the polymers were systematically characterized in terms of oxidative stability, acid doping and swelling, conductivity, mechanical strength and fuel cell performance and durability. With increased molecular weights the polymer membranes showed enhanced chemical stability towards radical attacks under the Fenton test, reduced volume swelling upon the acid doping and improved mechanical strength at acid doping levels of as high as about 11 mol H 3 PO 4 per molar repeat polymer unit. The PBI‐78kDa/10.8PA membrane, for example, exhibited tensile strength of 30.3 MPa at room temperature or 7.3 MPa at 130 °C and a proton conductivity of 0.14 S cm–1 at 160 °C. Fuel cell tests with H 2 and air at 160 °C showed high open circuit voltage, power density and a low degradation rate of 1.5 μV h–1 at a constant load of 300 mA cm–2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Proton conduction in acid doped polybenzimidazole
Bouchet, R. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(98)00466-4 · Cited by 501
Investigation of the conduction properties of phosphoric and sulfuric acid doped polybenzimidazole
Glipa, X., Bonnet, B., Mula, B., Jones, D. J., & Rozière, J. (1999) · Journal of Materials Chemistry · doi:10.1039/a906060j · Cited by 315
Cited by
A review of high-temperature proton exchange membrane fuel cell (HT-PEMFC) system
Rosli, R. E., Sulong, A. B., Daud, W. R. W., Zulkifley, M. A., Husaini, T., Rosli, M. I., Majlan, E. H., & Haque, M. A. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.06.211 · Cited by 723
Review of Advanced Materials for Proton Exchange Membrane Fuel Cells
Kraytsberg, A., & Ein-Eli, Y. (2014) · Energy & Fuels · doi:10.1021/ef501977k · Cited by 705
Tang, H., Geng, K., Wu, L., Liu, J., Chen, Z., You, W., Yan, F., Guiver, M. D., & Li, N. (2022) · Nature Energy · doi:10.1038/s41560-021-00956-w · Cited by 335
Protonated phosphonic acid electrodes for high power heavy-duty vehicle fuel cells
Lim, K. H., Lee, A. S., Atanasov, V., Kerres, J., Park, E. J., Adhikari, S., Maurya, S., Manriquez, L. D., Jung, J., Fujimoto, C., et al. (2022) · Nature Energy · doi:10.1038/s41560-021-00971-x · Cited by 196
Wang, J., Dai, Y., Wan, R., Wei, W., Xu, S., Zhai, F., & He, R. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127541 · Cited by 89
Self-citation
Metadata
- Authors
- Yang, J. S., Cleemann, L. N., Steenberg, T., Terkelsen, C., Li, Q. F., Jensen, J. O., Hjuler, H. A., Bjerrum, N. J., & He, R. H.
- Venue
- Fuel Cells
- Publisher
- Wiley
- Published
- 2013-12-06
- Volume
- 14
- Issue
- 1
- Pages
- 7-15
- ISSN
- 1615-6846 (ISSN-L)
- 1615-6854
- OpenAlex
- W2106608882
- Cited by
- 167
- References
- 2
- FWCI
- 6.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.