Effects of Ionomer Carbon Ratio and Ionomer Dispersity on the Performance and Durability of MEAs
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
Membrane‐electrode assemblies (MEAs) are fabricated using different catalysts and ionomers, in order to investigate the effects of these factors on the performance and stability of the polymer electrolyte membrane fuel cell (PEMFC). Platinum catalysts with different degrees of graphitization in the carbon support (less graphitized: Tanaka, more graphitized: RTX) are used. Perfluorosulfonic acid polymer‐based ionomers with water‐based or organic solvent‐based solvents are also prepared as binders for the electrode. The optimum composition of catalyst and ionomer is identified based on the results of cyclic voltammetry, electrochemical impedance spectroscopy, single cell performance, and long‐term durability tests. Tanaka catalyst and water‐based ionomer show the best performance and durability. In addition, the ionomer to carbon (I/C) weight ratio affects the fuel cell performance, and the optimum value is I/C = 1 for both water‐based and organic solvent‐based ionomers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Sometimes it is difficult to completely remove the solvents with a high boiling point, e.g., glycerol [142], or N-methyl-2pyrrolidone [143].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [143]
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Handbook of fuel cells. Fundamentals technology and applications
Patrick, J. W. (2004) · Fuel · doi:10.1016/j.fuel.2003.09.012 · Cited by 739
Zaidi, S. M. J., & Rauf, M. A. (2008) · Polymer Membranes for Fuel Cells · doi:10.1007/978-0-387-73532-0_1 · Cited by 544
Makharia, R., Mathias, M. F., & Baker, D. R. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1888367 · Cited by 514
Schlapbach, L. (2009) · Nature · doi:10.1038/460809a · Cited by 435
Three-dimensional analysis of Nafion layers in fuel cell electrodes
Lopez-Haro, M., Guétaz, L., Printemps, T., Morin, A., Escribano, S., Jouneau, P.-H., Bayle-Guillemaud, P., Chandezon, F., & Gebel, G. (2014) · Nature Communications · doi:10.1038/ncomms6229 · Cited by 402
Polymer Electrolyte Fuel Cell Durability
(2009) · Springer eBooks · doi:10.1007/978-0-387-85536-3 · Cited by 396
Park, Y.-C., Tokiwa, H., Kakinuma, K., Watanabe, M., & Uchida, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.091 · Cited by 389
Ciureanu, M., & Roberge, R. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp003273p · Cited by 258
Nafion in dilute solvent systems: Dispersion or solution?
Welch, C., Labouriau, A., Hjelm, R., Orler, B., Johnston, C., & Kim, Y. S. (2012) · ACS Macro Letters · doi:10.1021/mz3005204 · Cited by 211
Cited by
Covalent organic framework–based porous ionomers for high-performance fuel cells
Zhang, Q., Dong, S., Shao, P., Zhu, Y., Mu, Z., Sheng, D., Zhang, T., Jiang, X., Shao, R., Ren, Z., et al. (2022) · Science · doi:10.1126/science.abm6304 · Cited by 505
Suter, T. A. M., Smith, K., Hack, J., Rasha, L., Rana, Z., Angel, G. M. A., Shearing, P. R., Miller, T. S., & Brett, D. J. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101025 · Cited by 245
Impact of Catalyst Ink Dispersing Solvent on PEM Fuel Cell Performance and Durability
Lei, C., Yang, F., Macauley, N., Spinetta, M., Purdy, G., Jankovic, J., Cullen, D. A., More, K. L., Kim, Y. S., & Xu, H. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abf2b0 · Cited by 93
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
Xia, L., Ni, M., Xu, Q., Xu, H., & Zheng, K. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117012 · Cited by 81
Metadata
- Authors
- Lee, M. ‐., Lee, H. ‐., Yim, S. ‐., Kim, C. ‐., Shul, Y. ‐., Kucernak, A., & Shin, D.
- Affiliations
- Korea Institute of Energy Research Fuel Cell Laboratory 152 Gajeong‐ro Yuseong‐gu, Daejeon Republic of Korea
- Korea University (KR)
- Korea Institute of Energy Research (KR)
- Yonsei University (KR)
- Imperial College London (GB)
- Corresponding author
- Shin, D.
- Venue
- Fuel Cells
- Publisher
- Wiley
- Published
- 2018-04
- Volume
- 18
- Issue
- 2
- Pages
- 129-136
- ISSN
- 1615-6846 (ISSN-L)
- 1615-6854
- OpenAlex
- W2800220128
- Cited by
- 44
- References
- 25
- Citations by year
- 2026: 3 · 2025: 7 · 2024: 5 · 2023: 6 · 2022: 8 · 2021: 8 · 2020: 4 · 2019: 3
- FWCI
- 1.43
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Fuel Cells (publishedVersion)
- Funders
- Korea Institute of Energy Technology Evaluation and Planning
- Ministry of Trade, Industry and Energy (20148520120160)
- Korea Institute of Energy Research (B8‐2422)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- membrane electrode assembly, proton exchange membrane fuel cells, ionomer-to-carbon ratio, platinum catalysts, perfluorosulfonic acid ionomer, catalyst binder, fuel cell durability, fuel cell performance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.