The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effect of DEM data resolution on SWAT output uncertainty
Abstract
This paper describes the effect of DEM data resolution on predictions from the SWAT model. Measured hydrologic, meteorological, watershed characteristics and water quality data from Moores Creek watershed (near Lincoln, AR, USA) were used in the simulation. The effect of input data resolution was evaluated by running seven scenarios at increasing DEM grid sizes (30 × 30 m, 100 × 100 m, 150 × 150 m, 200 × 200 m, 300 × 300 m, 500 × 500 m, 1000 × 1000 m). The model was calibrated on an annual basis for flow, NO 3‐N and total P using 30 × 30 m DEM data. The predicted output at the calibrated scale was used to evaluate output accuracy for the remaining input resolutions. Results of this study showed that DEM resolution affects the watershed delineation, stream network and sub‐basin classification in the SWAT model. A decrease in DEM resolution resulted in decreased stream flow and NO 3‐N load predictions. However, model predicted total P did not always decrease with DEM resolution. Results of this study indicate that the choice of input DEM resolution depends on the watershed response of interest. Minimum DEM data resolution ranged from 100 to 200 m to achieve less than 10% error in SWAT output for flow, NO 3‐N and TP predictions. Copyright © 2005 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LARGE AREA HYDROLOGIC MODELING AND ASSESSMENT PART I: MODEL DEVELOPMENT 1
Arnold, J. G., Srinivasan, R., Muttiah, R. S., & Williams, J. R. (1998) · JAWRA Journal of the American Water Resources Association · doi:10.1111/j.1752-1688.1998.tb05961.x · Cited by 7,945 · cited 2×
“The SWAT model has become widely accepted as an effective tool to predict the effects of watershed management on runoff, sediment, nutrients and pesticide yields (Arnold et al., 1993, 1998).”
Method
Cited by
Airborne LiDAR for DEM generation: some critical issues
Liu, X. (2008) · Progress in Physical Geography: Earth and Environment · doi:10.1177/0309133308089496 · Cited by 635
Uncertainties Associated with Digital Elevation Models for Hydrologic Applications: A Review
Wechsler, S. P. (2007) · Hydrology and Earth System Sciences · doi:10.5194/hess-11-1481-2007 · Cited by 280
The Use of LiDAR-Derived DEM in Flood Applications: A Review
Muhadi, N. A., Abdullah, A. F., Bejo, S. K., Mahadi, M. R., & Mijic, A. (2020) · Remote Sensing · doi:10.3390/rs12142308 · Cited by 172
Radaideh, O. M. A., Grasemann, B., Melichar, R., & Mosar, J. (2016) · Geomorphology · doi:10.1016/j.geomorph.2016.09.033 · Cited by 67
Metadata
- Authors
- Chaubey, I., Cotter, A. S., Costello, T. A., & Soerens, T. S.
- Venue
- Hydrological Processes
- Publisher
- Wiley
- Published
- 2005-02-04
- Volume
- 19
- Issue
- 3
- Pages
- 621-628
- ISSN
- 0885-6087 (ISSN-L)
- 1099-1085
- OpenAlex
- W1985167980
- Cited by
- 225
- References
- 1
- FWCI
- 8.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.