The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Mechanical properties of biodegradable polymers and composites proposed for internal fixation of bone
Abstract
The mechanical properties of biodegradable polymers and composites proposed for use in internal fixation (in place of stainless steel) are crucial to the performance of devices made from them for support of healing bone. To assess the reported range of properties and degradation rates. we searched and reviewed papers and abstracts published in English from 1980 through 1988. Mechanical property data were found for poly(lactic acid), poly (glycolic acid), poly(ϵ‐caprolactone), polydioxanone, poly(ortho ester), poly(ethylene oxide), and/or their copolymers. Reports of composites based on several of these materials, reinforced with nondegradable and degradable fibers, were also found. The largest group of studies involved poly(lactic acid). Mechanical test methods varied widely, and studies of the degradation of mechanical properties were performed under a variety of conditions, mostly in vitro rather than in vivo. Compared to annealed stainless steel, unreinforced biodegradable polymers were initially up to 36% as strong in tension and 54% in bending, but only about 3% as stiff in either test mode. With fiber reinforcement, reported highest initial strengths exceeded that of stainless steel. Stiffness reached 62% of stainless steel wiht nondegradable carbon fibers, 15% with degradable inorganic fibers, but only 5% with degradable polymeric fibers. The slowest‐degrading unreinforced biodegradable polymers were poly(L‐lactic acid) and poly(ortho ester). Biodegradable composites with carbon or inorganic fibers generally lost strength rapidly, with a slower loss of stiffness, suggesting the difficulty of fiber‐matrix coupling in these system. The strength of composites reinforced wiht (lower modulus) degradable polymeric fibers decreased more slowly. Low implant stiffness might be expected to allow too much bone motion for satisfactory healing. However, unreinforced or degradable polymeric fiber reinforced materials have been used successfully clinically. The key has been careful selection of applications, plus use of designs and fixation methods distinctly different from those appropriate for stainless steel devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strength of biological materials
Yamada, H., & Evans, F. G. (1970) · Cited by 1,136
Biodegradable poly(lactic acid) polymers
Kulkarni, R. K., Moore, E. G., Hegyeli, A. F., & Leonard, F. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050305 · Cited by 799
The Mechanical Properties of Cortical Bone
REILLY, D. T., & BURSTEIN, A. H. (1974) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197456050-00012 · Cited by 653
The mechanical properties of bone.
Evans, F. G. (1969) · PubMed · Cited by 587
Strength of biological materials
Roberts, V. L. (1971) · Journal of Biomechanics · doi:10.1016/0021-9290(71)90027-3 · Cited by 566
Influence of molecular weight and molecular weight distribution on mechanical properties of polymers
Nunes, R. W., Martin, J. R., & Johnson, J. F. (1982) · Polymer Engineering & Science · doi:10.1002/pen.760220402 · Cited by 473
Resorbable materials of poly(l-lactide)
Leenslag, J. W., Pennings, A. J., Bos, R. R. M., Rozema, F. R., & Boering, G. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90121-9 · Cited by 329
Resorbable poly(L-lactide) plates and screws for the fixation of zygomatic fractures
Bos, R. R. M., Boering, G., Rozema, F. R., & Leenslag, J. W. (1987) · Journal of Oral and Maxillofacial Surgery · doi:10.1016/0278-2391(87)90194-7 · Cited by 324
Resorbable materials of poly(l-lactide). VI. Plates and screws for internal fracture fixation
Leenslag, J. W., Pennings, A. J., Bos, R. R. M., Rozema, F. R., & Boering, G. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90034-2 · Cited by 295
The Mechanical Properties of Bone
CURREY, J. D. (1970) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-197011000-00023 · Cited by 280
Peppas, N. A. (1984) · Journal of Controlled Release · doi:10.1016/0168-3659(84)90034-8 · Cited by 255
Miller, N. D., & Williams, D. F. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90102-5 · Cited by 254
Biodegradable PEO/PLA block copolymers
Cohn, D., & Younes, H. (1988) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820221104 · Cited by 241
Polymers for biodegradable medical devices
Holland, S. J., Jolly, A. M., Yasin, M., & Tighe, B. J. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90117-7 · Cited by 225
Biodegradable internal fixation for malleolar fractures. A prospective randomised trial
Bostman, O., Vainionpaa, S., Hirvensalo, E., Makela, A., Vihtonen, K., Tormala, P., & Rokkanen, P. (1987) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.69b4.3611169 · Cited by 161
Vainionpää, S., Kilpikari, J., Laiho, J., Helevirta, P., Rokkanen, P., & Törmälä, P. O. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90028-7 · Cited by 135
Polymers for biodegradable medical devices
Yasin, M., Holland, S. J., & Tighe, B. J. (1990) · Biomaterials · doi:10.1016/0142-9612(90)90057-w · Cited by 128
Doyle, C. (1987) · Clinical Materials · doi:10.1016/0267-6605(87)90038-2 · Cited by 113
Törmälä, P. O., Vainionpää, S., Kilpikari, J., & Rokkanen, P. (1987) · Biomaterials · doi:10.1016/0142-9612(87)90027-5 · Cited by 111
Synthesis and evaluation of biodegradable block copolymers of ε‐caprolactone and DL ‐lactide
Feng, X., Song, C. X., & Chen, W. Y. (1983) · Journal of Polymer Science Polymer Letters Edition · doi:10.1002/pol.1983.130210802 · Cited by 96
Zimmerman, M. C., Parsons, J. R., & Alexander, H. (1987) · Journal of Biomedical Materials Research · doi:10.1002/j.1097-4636.1987.tb00029.x · Cited by 88
Body-absorbable osteosynthesis devices
Tunc, D. C. (1991) · Clinical Materials · doi:10.1016/0267-6605(91)90019-c · Cited by 51
Development of new methods for phalangeal fracture fixation
Alexander, H., Langrana, N. A., Massengill, J. B., & Weiss, A. B. (1981) · Journal of Biomechanics · doi:10.1016/0021-9290(81)90055-5 · Cited by 35
Totally Bioresorbable Composites Systems for Internal Fixation of Bone Fractures
Vert, M., Christel, P., Garreau, H., Audion, M., Chanavaz, M., & Chabot, F. (1986) · Springer eBooks · doi:10.1007/978-1-4613-1809-5_21 · Cited by 32
Lactic acid polymers: strong, degradable thermoplastics
Wehrenberg, R. H. (1981) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 31
Biodegradable Pela Block Copolymers: In Vitro Degradation and Tissue Reaction
Younes, H., Nataf, P., Cohn, D., Appelbaum, Y. J., Pizov, G., & Uretzky, G. (1988) · Biomaterials Artificial Cells and Artificial Organs · doi:10.3109/10731198809117563 · Cited by 30
Maio, E. D., & Iannace, S. (2012) · Wiley eBooks · doi:10.1002/9781118097298.weoc013 · Cited by 7
Cited by
Long-Circulating and Target-Specific Nanoparticles: Theory to Practice
Moghimi, S. M., Hunter, A. C., & Murray, J. C. (2001) · Pharmacological Reviews · doi:10.1016/s0031-6997(24)01494-7 · Cited by 3,515
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Polymeric systems for controlled drug release
Uhrich, K. E., Cannizzaro, S. M., Langer, R. S., & Shakesheff, K. M. (1999) · Chemical Reviews · doi:10.1021/cr940351u · Cited by 2,633
Controlled Ring-Opening Polymerization of Lactide and Glycolide
Dechy-Cabaret, O., Martin-Vaca, B., & Bourissou, D. (2004) · Chemical Reviews · doi:10.1021/cr040002s · Cited by 2,257
Athanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497
Metadata
- Authors
- Daniels, A. U., Chang, M. K. O., Andriano, K. P., & Heller, J.
- Venue
- Journal of Applied Biomaterials
- Publisher
- Wiley
- Published
- 1990-03
- Volume
- 1
- Issue
- 1
- Pages
- 57-78
- ISSN
- 1045-4861 (ISSN-L)
- 1549-9316
- OpenAlex
- W1979467412
- Cited by
- 483
- References
- 27
- FWCI
- 8.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.