Ex vivo interactions and surface property relationships of polyetherurethanes
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Despite the use of polyurethanes in a number of blood‐contacting applications, little is known about the contributing effects of the various polyurethane components in thrombogenesis. In order to investigate blood‐polyurethane interactions, a number of different polyurethanes were examined in an acute canine ex vivo series shunt experiment. Multiprobe surface characterization techniques, including contact angle measurements, ESCA, ATR‐IR, and SEM were used to obtain surface property information on the materials studied. The polyurethanes examined included several with different soft segment types, a series of materials with different hard segment diisocyanates and chain extenders, a series consisting of the same polymer cast from different solvents, a zwitterionomer, and a hard segment analog. Two commercial urethanes were also examined, and the effect of methanol extraction on these materials was studied. The blood‐contact and surface characterization results indicated that both the surface concentration and type of hard segment were of importance in determining blood response. The relative concentration of hard segment on the polymer surface was found to affect the observed blood‐material interaction, although the extent of this effect was found to depend on the hard and soft segment components of the copolymer system. Both the surface properties and thrombogenicity of a particular polyurethane were changed by casting from different solvents, indicating the need to optimize and control fabrication conditions. Methanol extraction was found to improve the thromboresistance of the commercial polyurethanes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physicochemical characterization and in vivo blood tolerability of cast and extruded biomer
Lelah, M. D., Lambrecht, L. K., Young, B. R., & Cooper, S. L. (1983) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820170102 · Cited by 134
Self-citationThe measurement of contact angles on circular tubing surfaces using the captive bubble technique
Lelah, M. D., Grasel, T. G., Pierce, J. A., & Cooper, S. L. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190913 · Cited by 43
Self-citation
Cited by
Blood compatibility of polyethylene oxide surfaces
LEE, J., LEE, H., & ANDRADE, J. (1995) · Progress in Polymer Science · doi:10.1016/0079-6700(95)00011-4 · Cited by 703
Polyurethanes in Biomedical Applications
Burke, A., & Hasirci, N. (2004) · Advances in Experimental Medicine and Biology · doi:10.1007/978-0-306-48584-8_7 · Cited by 494
Skarja, G. A., & Woodhouse, K. A. (1998) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856298x00659 · Cited by 173
Silver, J. H., Myers, C. W., Lim, F., & Cooper, S. L. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90168-6 · Cited by 60
Self-citation
Metadata
- Authors
- Lelah, M. D., Grasel, T. G., Pierce, J. A., & Cooper, S. L.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1986-04
- Volume
- 20
- Issue
- 4
- Pages
- 433-468
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W1966592744
- Cited by
- 90
- References
- 2
- FWCI
- 9.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ex vivo interactions and surface property relationships of polyetherurethanes. https://app.cochat.ai/papers/10.1002/jbm.820200403
- The paper
- Lelah, M. D., Grasel, T. G., Pierce, J. A., & Cooper, S. L. (1986). Ex vivo interactions and surface property relationships of polyetherurethanes. Journal of Biomedical Materials Research. https://doi.org/10.1002/jbm.820200403
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.