Effect of polyol molecular weight on the physical properties and haemocompatibility of polyurethanes containing polyethylene oxide macroglycols
The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
The physical properties and haemocompatibility of polyurethanes containing polyethylene oxide (PEO) of varying molecular weights but constant weight fraction of hard segment are investigated. The PEO molecular weights studied were 600, 1450 and 8000. Analysis of polyurethane phase separation and crystallinity using dynamic-mechanical analysis and differential scanning calorimetry show that the degree of phase separation and crystallinity increase with polyol molecular weight, but level off at the highest molecular weights. The degree of water absorption increases substantially with increasing PEO molecular weight, levelling off at the highest molecular weight. Tensile data show a maximum in extensibility at a polyethylene glycol (PEG) molecular weight of 1450, while ultimate strength increases with increasing segment length. When the materials are hydrated, there is a significant drop in the modulus, ultimate stress and ultimate elongation. Dynamic contact angle measurements show that surface hydrophobicity decreases as the soft segment molecular weight increases. Using electron spectroscopy for chemical analysis (ESCA) to determine the surface composition of these polyurethanes, it was found that the hard segment content at the surface increases as the polyol block length decreases. The haemocompatibility of these polyurethanes was investigated in an ex vivo canine blood-contacting model. Only for the shortest block length studied, PEG-600, are differences in blood compatibi…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Variations in PEU blood compatibility have been observed, with improved thromboresistance correlating to more alkylated soft segments [82], higher soft segment content on the surface [83] and surface treatment, such as grafted sulfonate groups [84,85].”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [83]
Citations
Cites
Petrović, Z. S., & Ferguson, J. (1991) · Progress in Polymer Science · doi:10.1016/0079-6700(91)90011-9 · Cited by 895
Koberstein, J. T., Galambos, A. F., & Leung, L. M. (1992) · Macromolecules · doi:10.1021/ma00049a017 · Cited by 270
Desai, N. P., & Hubbell, J. A. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90193-e · Cited by 265
Biological responses to polyethylene oxide modified polyethylene terephthalate surfaces
Desai, N. P., & Hubbell, J. A. (1991) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820250704 · Cited by 257
Benoit, H., & Hadziioannou, G. (1988) · Macromolecules · doi:10.1021/ma00183a040 · Cited by 235
Heparin immobilization onto segmented polyurethaneurea surfaces—effect of hydrophilic spacers
Park, K. D., Okano, T., Nojiri, C., & Kim, S. W. (1988) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820221103 · Cited by 227
Biomaterials and clinical applications
Amidon, G. L. (1988) · Journal of Controlled Release · doi:10.1016/0168-3659(88)90015-6 · Cited by 214
Polyethylene oxide as a biomaterial
Merrill, E. W., & Ew, S. (1983) · ASAIO Journal · Cited by 203
Dynamic mechanical properties of polyurethane block polymers
Huh, D. S., & Cooper, S. L. (1971) · Polymer Engineering & Science · doi:10.1002/pen.760110504 · Cited by 202
Self-citationSurface-immobilized polyethylene oxide for bacterial repellence
Desai, N. P., Hossainy, S. F. A., & Hubbell, J. A. (1992) · Biomaterials · doi:10.1016/0142-9612(92)90160-p · Cited by 194
Cited by
Blood compatibility of polyethylene oxide surfaces
LEE, J., LEE, H., & ANDRADE, J. (1995) · Progress in Polymer Science · doi:10.1016/0079-6700(95)00011-4 · Cited by 703
Poly(ethylene oxide) Grafted to Silicon Surfaces: Grafting Density and Protein Adsorption
Sofia, S. J., Premnath, V., & Merrill, E. W. (1998) · Macromolecules · doi:10.1021/ma971016l · Cited by 610
Shape-memory polymers as a technology platform for biomedical applications
Lendlein, A., Behl, M., Hiebl, B., & Wischke, C. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.8 · Cited by 469
PDMS-based polyurethanes with MPEG grafts: synthesis, characterization and platelet adhesion study
Park, J. H., Park, K. D., & Bae, Y. H. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00250-6 · Cited by 168
Accelerated cell sheet recovery by co-grafting of PEG with PIPAAm onto porous cell culture membranes
Kwon, O. H., Kikuchi, A., Yamato, M., & Okano, T. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00469-6 · Cited by 154
Metadata
- Authors
- Silver, J. H., Myers, C. W., Lim, F., & Cooper, S. L.
- Affiliations
- University of Wisconsin–Madison (US)
- University of Delaware (US)
- Corresponding author
- Cooper, Stuart L.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 1994
- Volume
- 15
- Issue
- 9
- Pages
- 695-704
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W1967453175
- Cited by
- 60
- References
- 31
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 1 · 2023: 1 · 2022: 4 · 2021: 1 · 2018: 1 · 2017: 2 · 2016: 4 · 2014: 1 · 2013: 1 · 2012: 1
- FWCI
- 1.68
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Biomaterials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Science Foundation
- National Institutes of Health (5r01hl047179-08, 2r01hl024046-09)
- National Heart, Lung, and Blood Institute (HL-47179, HL 24046)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- polyurethane, polyethylene glycol, polyol molecular weight, hemocompatibility, phase separation, crystallinity, water absorption, tensile properties, surface hydrophobicity, surface composition, thrombogenicity, blood-contacting materials, soft segment
- MeSH terms
- Animals, Biocompatible Materials, Blood, Blood Physiological Phenomena, Blood Platelets, Chemistry, Physical, Dogs, Fibrinogen, Molecular Weight, Platelet Aggregation, Polyethylene Glycols, Polyurethanes, Surface Properties, Thromboembolism, Chemical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of polyol molecular weight on the physical properties and haemocompatibility of polyurethanes containing polyethylene oxide macroglycols. https://app.cochat.ai/papers/10.1016/0142-9612(94)90168-6
- The paper
- Silver, J. H., Myers, C. W., Lim, F., & Cooper, S. L. (1994). Effect of polyol molecular weight on the physical properties and haemocompatibility of polyurethanes containing polyethylene oxide macroglycols. Biomaterials. https://doi.org/10.1016/0142-9612(94)90168-6
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.