Properties and biological inteactions of polyurethane anionomers: Effect of sulfonate incorporation
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In order to investigate the factors affecting the interaction of polyurethanes and blood, a series of poly (tetramethylene oxide)‐based polyurethane block copolymers was synthesized with systematically varying levels of ion incorporation in the hard segment block. A bimolecular nucleophilic substitution reaction was used to replace up to 20% of the urethane hydrogens with propyl sulfonate groups. Bulk and surface characterization was performed, and a canine ex vivo arteriovenous shunt was used to monitor initial platelet and fibrinogen deposition on these surfaces. The microphase separation and bulk physical properties were found to vary with ionic content. Surface analysis using both in vacuo (ESCA) and water‐equilibrated (contact angle) methods indicated that these polymers, and especially the highly sulfonated materials, could rearrange to minimize their interfacial tension, depending on the contacting environment. Platelet deposition onto these materials decreased as the level of sulfonation increased, with the highly sulfonated polymer showing substantially less platelet spreading and activation than previously seen in the same experiment with other polymers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The measurement of contact angles on circular tubing surfaces using the captive bubble technique
Lelah, M. D., Grasel, T. G., Pierce, J. A., & Cooper, S. L. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190913 · Cited by 43
Self-citation
Cited by
Wang, Y.-X., Robertson, J. L., Spillman, W. B., & Claus, R. O. (2004) · Pharmaceutical Research · doi:10.1023/b:pham.0000036909.41843.18 · Cited by 357
Synthesis and characterization of non-leaching biocidal polyurethanes
Grapski, J. A., & Cooper, S. L. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00412-9 · Cited by 109
Self-citationSilver, J. H., Myers, C. W., Lim, F., & Cooper, S. L. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90168-6 · Cited by 60
Self-citation
Metadata
- Authors
- Grasel, T. G., & Cooper, S. L.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1989-03
- Volume
- 23
- Issue
- 3
- Pages
- 311-338
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2056875440
- Cited by
- 179
- References
- 1
- FWCI
- 10.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.