The DOI matches its Crossref record.
Design and fabrication of standardized hydroxyapatite scaffolds with a defined macro‐architecture by rapid prototyping for bone‐tissue‐engineering research
Open accessAbstract
This investigation describes the production and characterization of calcium phosphate scaffolds with defined and reproducible porous macro‐architectures and their preliminary in vitro and in vivo bone‐tissue‐engineered response. Fugitive wax molds were designed and produced using a rapid prototyping technique. An aqueous hydroxyapatite slurry was cast in these molds. After sintering at 1250°C and then cleaning, dimensional and material characterizations of the scaffolds were performed. The resulting scaffolds represented the design, and their dimensions were remarkably consistent. A texture inherent to the layer‐by‐layer production of the mold was impressed onto the vertical surfaces of the scaffolds. The surface roughness (Ra) of the textured surfaces was significantly greater than that of the nontextured surfaces. Material analyses revealed a β‐TCP phase in addition to hydroxyapatite for the molded ceramics. Non‐molded control ceramics exhibited only hydroxyapatite. Thirty scaffolds were seeded with culture‐expanded goat bone‐marrow stromal cells (BMSCs) and implanted subcutaneously in nude mice for 4 or 6 weeks. Histology revealed mineralized bone formation in all the scaffolds for both implantation periods. After 4 weeks, bone was present primarily as a layer on scaffold surfaces. After 6 weeks, the surface bone formation was accompanied by bone budding from the surface and occasional bridging of pores. This budding and bridging bone formation almost always was associated with textured scaffold surfaces. However, the area percentage of bone in pores was similar for the 4‐ and 6‐week implantation periods. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res 68A: 123–132, 2004
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Vascularization in tissue engineering
Rouwkema, J., Rivron, N. C., & van Blitterswijk, C. A. (2008) · Trends in Biotechnology · doi:10.1016/j.tibtech.2008.04.009 · Cited by 1,211
Self-citationHutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Rapid prototyping in tissue engineering: challenges and potential
Yeong, W.-Y., Chua, C.-K., Leong, K.-F., & Chandrasekaran, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.10.004 · Cited by 807
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2002) · Tissue Engineering · doi:10.1089/107632702753503009 · Cited by 729
Ceramic composites as matrices and scaffolds for drug delivery in tissue engineering
Habraken, W. J. E. M., Wolke, J. G. C., & Jansen, J. A. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.011 · Cited by 566
Processing and properties of advanced porous ceramics: An application based review
Hammel, E. C., Ighodaro, O. L.-R., & Okoli, O. I. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.06.095 · Cited by 563
How smart do biomaterials need to be? A translational science and clinical point of view
Holzapfel, B. M., Reichert, J. C., Schantz, J.-T., Gbureck, U., Rackwitz, L., Nöth, U., Jakob, F., Rudert, M., Groll, J., & Hutmacher, D. W. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.07.009 · Cited by 552
Design and Development of Three-Dimensional Scaffolds for Tissue Engineering
Liu, C., Xia, Z., & Czernuszka, J. T. (2007) · Chemical Engineering Research and Design · doi:10.1205/cherd06196 · Cited by 483
RAJAGOPALAN, S., & ROBB, R. (2006) · Medical Image Analysis · doi:10.1016/j.media.2006.06.001 · Cited by 392
Byrne, D. P., Lacroix, D., Planell, J. A., Kelly, D. J., & Prendergast, P. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.003 · Cited by 362
Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants
Habibovic, P., Gbureck, U., Doillon, C. J., Bassett, D. C., van Blitterswijk, C. A., & Barralet, J. E. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.10.023 · Cited by 347
Self-citationChai, Y. C., Carlier, A., Bolander, J., Roberts, S. J., Geris, L., Schrooten, J., Van Oosterwyck, H., & Luyten, F. P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.07.002 · Cited by 305
Mauney, J. R., Volloch, V., & Kaplan, D. L. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.787 · Cited by 269
Wang, H., Zuo, Y., Zou, Q., Cheng, L., Huang, D., Wang, L., & Li, Y. (2009) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23171 · Cited by 48
Metadata
- Authors
- Wilson, C. E., de Bruijn, J. D., van Blitterswijk, C. A., Verbout, A. J., & Dhert, W. J. A.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2003-11-26
- Volume
- 68A
- Issue
- 1
- Pages
- 123-132
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2109824761
- Cited by
- 184
- References
- 0
- FWCI
- 7.69
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.