The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effects of surface roughness and maximum load on the mechanical properties of cancellous bone measured by nanoindentation
Open accessAbstract
The effects of two key experimental parameters on the measured nanomechanical properties of lamellar and interlamellar tissue were examined in dehydrated rabbit cancellous bone. An anhydrous sample preparation protocol was developed to maintain surface integrity and produce RMS surface roughnesses ∼10 nm (5 × 5‐μm 2 area). The effects of surface roughness and maximum nanoindentation load on the measured mechanical properties were examined in two samples of differing surface roughness using maximum loads ranging from 250 to 3000 μN. As the ratio of indentation depth to surface roughness decreased below ∼3:1, the variability in material properties increased substantially. At low loads, the indentation modulus of the lamellar bone was ∼20% greater than that of the interlamellar bone, while at high loads the measured properties of both layers converged to an intermediate value. Relatively shallow indentations made on smooth surfaces revealed significant differences in the properties of lamellar and interlamellar bone that support microstructural observations that lamellar bone is more mineralized than interlamellar bone. © 2005 Wiley Periodicals, Inc. J Biomed Mater Res, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Landis, W. J., & Glimcher, M. J. (1978) · Journal of Ultrastructure Research · doi:10.1016/s0022-5320(78)80074-4 · Cited by 184
Cited by
Nanoindentation of biological materials
Ebenstein, D. M., & Pruitt, L. A. (2006) · Nano Today · doi:10.1016/s1748-0132(06)70077-9 · Cited by 479
Nanoscale heterogeneity promotes energy dissipation in bone
Tai, K., Dao, M., Suresh, S., Palazoglu, A., & Ortiz, C. (2007) · Nature Materials · doi:10.1038/nmat1911 · Cited by 402
Methods for Assessing Bone Quality: A Review
Donnelly, E. (2011) · Clinical Orthopaedics & Related Research · doi:10.1007/s11999-010-1702-0 · Cited by 300
Self-citationYoung’s modulus of trabecular bone at the tissue level: A review
Wu, D., Isaksson, P., Ferguson, S. J., & Persson, C. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.001 · Cited by 263
Lloyd, A. A., Gludovatz, B., Riedel, C., Luengo, E. A., Saiyed, R., Marty, E., Lorich, D. G., Lane, J. M., Ritchie, R. O., Busse, B., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1704460114 · Cited by 158
Self-citationElastic Anisotropy of Human Cortical Bone Secondary Osteons Measured by Nanoindentation
Franzoso, G., & Zysset, P. K. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3005162 · Cited by 89
Guss, J. D., Taylor, E., Rouse, Z., Roubert, S., Higgins, C. H., Thomas, C. J., Baker, S. P., Vashishth, D., Donnelly, E., Shea, M. K., et al. (2019) · Bone · doi:10.1016/j.bone.2019.06.010 · Cited by 77
The effect of osteoporosis treatments on fatigue properties of cortical bone tissue
Brock, G. R., Chen, J. T., Ingraffea, A. R., MacLeay, J., Pluhar, G. E., Boskey, A. L., & van der Meulen, M. C. H. (2015) · Bone Reports · doi:10.1016/j.bonr.2014.10.004 · Cited by 33
Self-citation
Metadata
- Authors
- Donnelly, E., Baker, S. P., Boskey, A. L., & van der Meulen, M. C. H.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2006-01-03
- Volume
- 77A
- Issue
- 2
- Pages
- 426-435
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2003682724
- Cited by
- 208
- References
- 1
- FWCI
- 8.01
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.