The DOI matches its Crossref record.
Biodegradable porous polyurethane scaffolds for tissue repair and regeneration
Abstract
Critical‐size bone defects usually require the insertion of autogenous bone graft to heal. Harvesting of bone is traumatic and results in high morbidity at the donor site. A potential alternative to bone graft may be a bone substitute with adequate biocompatibility and biological properties produced from ceramics or bioresorbable/biodegradable polymers. In the present study, new elastomeric biodegradable polyurethanes with an enhanced affinity toward cells and tissues were synthesized using aliphatic diisocyanate, poly(ϵ‐caprolactone) diol, and biologically active 1,4:3,6‐dianhydro‐D‐sorbitol (isosorbide diol) as chain extender. The polymers were processed into 3D porous scaffolds by applying a combined salt leaching‐phase inverse process. The critical parameters controlling pore size and geometry were the solvents and nonsolvents used for scaffold preparation and the sizes of the solid porogen crystals. Scaffolds prepared from the polymer solution in solvents such as dimethylsulfoxide or methyl‐2‐pyrrolidone did not have a homogenous pore structure. Many pores were interconnected, but numerous pores were closed. Irrespective of the high pore‐to‐volume ratio (75%), the scaffolds showed poor water permeability. The best solvent for the preparation of scaffolds from the polyurethane used in the study was dimethylformamide (DMF). The type of nonsolvent admixed to the polymer solution in DMF strongly affected the scaffolds' pore structure. The elastomeric polyurethane scaffold prepared from the optimal solvent–nonsolvent mixture had regular interconnected pores, high water permeability, and a pore‐to‐volume ratio of 90%. The osteoconductive properties of the 3D porous polyurethane scaffolds can be additionally promoted by loading them with calcium phosphate salts such as hydroxyapatite or tricalcium phosphate, thus making them promising candidates for bone graft substitutes. © 2006 Wiley Periodicals, Inc. J Biomed Mater Res, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Polymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
Polymers from renewable 1,4:3,6-dianhydrohexitols (isosorbide, isomannide and isoidide): A review
Fenouillot, F., Rousseau, A., Colomines, G., Saint-Loup, R., & Pascault, J.-P. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.10.001 · Cited by 752
Biodegradable Polyurethanes: Synthesis and Applications in Regenerative Medicine
Guelcher, S. A. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/teb.2007.0133 · Cited by 470
Hsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
A review: Fabrication of porous polyurethane scaffolds
Janik, H., & Marzec, M. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.12.037 · Cited by 371
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Articular cartilage: from formation to tissue engineering
Camarero-Espinosa, S., Rothen-Rutishauser, B., Foster, E. J., & Weder, C. (2016) · Biomaterials Science · doi:10.1039/c6bm00068a · Cited by 328
Hernandez, J. L., & Woodrow, K. A. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202102087 · Cited by 259
Metadata
- Authors
- Gorna, K., & Gogolewski, S.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2006-06-15
- Volume
- 79A
- Issue
- 1
- Pages
- 128-138
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2122429064
- Cited by
- 182
- References
- 0
- FWCI
- 7.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.