The DOI matches its Crossref record.
Mechanical properties of open‐pore titanium foam
Abstract
Open‐pore titanium foams are produced using the so‐called space holder method. The mechanical properties of titanium foams with porosities of 50–80% are studied. The stiffness and yield strength of the foams are found to encompass the property range between cancellous bone and cortical bone. The analyzed foams are found to be anisotropic due to the use of nonspherical space holder particles which rearrange during the compaction of the powder mixture. The titanium foams are stronger perpendicular to the compaction direction and weaker along the compaction axis. In view of the application as an implant material in the lumbar spine, an intermediate porosity of 60–65% is analyzed more in detail. The typical yield strength of titanium foam with 62.5% porosity is above 60MPa in compression, bending, and tension. Stiffness values vary with the testing method from 7–14 GPa. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2007
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Mullen, L., Stamp, R. C., Brooks, W. K., Jones, E., & Sutcliffe, C. J. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31219 · Cited by 410
Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
Campoli, G., Borleffs, M. S., Amin Yavari, S., Wauthle, R., Weinans, H., & Zadpoor, A. A. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.01.071 · Cited by 404
Metadata
- Authors
- Imwinkelried, T.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2007-01-24
- Volume
- 81A
- Issue
- 4
- Pages
- 964-970
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W1985990366
- Cited by
- 188
- References
- 0
- FWCI
- 16.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical properties of open‐pore titanium foam. https://app.cochat.ai/papers/10.1002/jbm.a.31118
- The paper
- Imwinkelried, T. (2007). Mechanical properties of open‐pore titanium foam. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.31118
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.