The DOI matches its Crossref record.
Freeze casting of porous hydroxyapatite scaffolds. I. Processing and general microstructure
Abstract
Freeze casting of aqueous suspensions on a cold substrate was investigated as a method for preparing hydroxyapatite (HA) scaffolds with unidirectional porosity. In the present paper, we report on the ability to manipulate the microstructure of freeze‐cast constructs by controlling the processing parameters. Constructs prepared from aqueous suspensions (5–20 volume percent particles) on a steel substrate at −20°C had a lamellar‐type microstructure, consisting of plate‐like HA and unidirectional pores oriented in the direction of freezing. Sintering for 3 h at 1350°C produced constructs with dense HA lamellas, porosity of ∼50%, and inter‐lamellar pore widths of 5–30 μm. The thickness of the HA lamellas decreased but the width of the pores increased with decreasing particle concentration. Decreasing the substrate temperature from −20°C to −196°C produced a finer lamellar microstructure. The use of water‐glycerol mixtures (20 wt % glycerol) as the solvent in the suspension resulted in the production of finer pores (1–10 μm) and a larger number of dendritic growth connecting the HA lamellas. On the other hand, the use of water‐dioxane mixtures (60 wt % dioxane) produced a cellular‐type microstructure with larger pores (90–110 μm). The ability to produce a uniaxial microstructure and its manipulation by controlling the processing parameters indicate the potential of the present freeze casting route for the production of scaffolds for bone tissue engineering applications. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2008
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Bioactive glass in tissue engineering
Rahaman, M. N., Day, D. E., Sonny Bal, B., Fu, Q., Jung, S. B., Bonewald, L. F., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.016 · Cited by 1,794
Self-citationBioceramics of calcium orthophosphates
Dorozhkin, S. V. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.11.050 · Cited by 1,338
Calcium Orthophosphates in Nature, Biology and Medicine
Dorozhkin, S. V. (2009) · Materials · doi:10.3390/ma2020399 · Cited by 823
Biological materials: Functional adaptations and bioinspired designs
Chen, P.-Y., McKittrick, J., & Meyers, M. A. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.03.001 · Cited by 766
Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives
Fu, Q., Saiz, E., Rahaman, M. N., & Tomsia, A. P. (2011) · Materials Science and Engineering: C · doi:10.1016/j.msec.2011.04.022 · Cited by 703
Self-citation
Metadata
- Authors
- Fu, Q., Rahaman, M. N., Dogan, F., & Bal, B. S.
- Venue
- Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Publisher
- Wiley
- Published
- 2007-12-20
- Volume
- 86B
- Issue
- 1
- Pages
- 125-135
- ISSN
- 1552-4973 (ISSN-L)
- 1552-4981
- OpenAlex
- W2055583540
- Cited by
- 171
- References
- 0
- FWCI
- 6.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Freeze casting of porous hydroxyapatite scaffolds. I. Processing and general microstructure. https://app.cochat.ai/papers/10.1002/jbm.b.30997
- The paper
- Fu, Q., Rahaman, M. N., Dogan, F., & Bal, B. S. (2008). Freeze casting of porous hydroxyapatite scaffolds. I. Processing and general microstructure. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.30997
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.