Catalytic hydrothermal treatment of pine wood biomass: effect of RbOH and CsOH on product distribution
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Low‐temperature hydrothermal treatment of pine wood biomass was performed in the presence of RbOH and CsOH catalysts (280 °C for 15 min). The effect of the catalysts on the distribution of products and the volatility distribution of oxygenated hydrocarbons was studied in detail. Oxygenated hydrocarbons were extracted from the liquid and solid portions and analysed individually by gas chromatography/mass spectrometry. Catalytic (RbOH and CsOH) hydrothermal treatment of wood biomass produced mainly phenolic compounds and benzenediol derivatives. The use of RbOH and CsOH catalysts hindered the formation of char and favoured the formation of oil products, as observed previously for various other base catalysts. The volatility distribution of hydrocarbons (ether extract) was characterised by carbon‐normal paraffin (C‐NP) gram and it was found that the oxygenated hydrocarbons from all runs, including thermal, were distributed in the boiling point region of n‐C 6 to n‐C 17. Copyright © 2005 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose decomposition in hot-compressed water with alkali or nickel catalyst
Minowa, T., Zhen, F., & Ogi, T. (1998) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(98)00059-x · Cited by 387
Pyrolysis of Lignins: Experimental and Kinetics Studies
Ferdous, D., Dalai, A. K., Bej, S. K., & Thring, R. W. (2002) · Energy & Fuels · doi:10.1021/ef0200323 · Cited by 310
Cited by
A review of hydrothermal biomass processing
Tekin, K., Karagöz, S., & Bektaş, S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.216 · Cited by 730
Self-citationAn overview of effect of process parameters on hydrothermal carbonization of biomass
Nizamuddin, S., Baloch, H. A., Griffin, G. J., Mubarak, N. M., Bhutto, A. W., Abro, R., Mazari, S. A., & Ali, B. S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.122 · Cited by 514
Effects of various solvents on the liquefaction of biomass to produce fuels and chemical feedstocks
Liu, Z., & Zhang, F.-S. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.08.009 · Cited by 384
Yin, S., Dolan, R., Harris, M., & Tan, Z. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.12.058 · Cited by 331
Hydrothermal liquefaction of cellulose to bio-oil under acidic, neutral and alkaline conditions
Yin, S., & Tan, Z. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.10.041 · Cited by 268
Porous carbon fabrication techniques: A review
Kobina Sam, D., Li, H., Xu, Y.-T., & Cao, Y. (2024) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.01.044 · Cited by 46
Metadata
- Authors
- Karagöz, S., Bhaskar, T., Muto, A., & Sakata, Y.
- Venue
- Journal of Chemical Technology & Biotechnology
- Publisher
- Wiley
- Published
- 2005-05-04
- Volume
- 80
- Issue
- 10
- Pages
- 1097-1102
- ISSN
- 0142-0356 (ISSN-L)
- 0268-2575
- 1097-4660
- OpenAlex
- W1989932597
- Cited by
- 53
- References
- 2
- FWCI
- 1.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.