The free energy of formation of the amide bond in polyamides
The DOI matches its Crossref record, with a small difference in title or year; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The degree of polymerization of a polyamide is determined by the equilibrium between carboxyl, amino, and amide groups, and water molecules. Equations are deduced for the relationship between the equilibrium constant k1, the number‐average chain length n and the partial pressure of water. Allowance is made for the presence of a cyclic monomer, whose amount is determined by a second equilibrium constant k2. For monomers capable of forming 8‐membered or larger rings k2 approaches 0, and for those capable of forming 5‐ or 6‐membered rings k2 approaches 1, and no polymer is formed. For 7‐membered rings k2 has such a value that cyclic monomer and polymer can exist together. When the cyclic monomer is not miscible with the polymer, polymer formation is possible from 5‐ and 6‐membered rings, e.g. diketopiperazine (dioxopiperazine), which polymerizes to polyglycine. From data on polymers of <‐caprolactam equations have been deduced giving the relationship between k1 and k2 and the temperature T, and from these the heat of formation Δ k, the entropy Δ S, and the free energy Δ F for the polyamide bond in polyaminocaproic acid have been calculated. Assuming that the values for nylon 66 (produced from hexamethylenediamine and adipic acid) are not greatly different, equations are obtained for the chain length n of nylon 66 in terms of the temperature T and the partial pressure of water, and also for n as a function of T in the presence of an aqueous phase. The reaction between carbon dioxide and a diamine is discussed, and it is shown that for the formation of a polymethyleneurea by this reaction k1 is probably much smaller than for the polyamides, so that conditions are less favourable to the formation of high polymers. It is shown that the inability of α‐amino‐acids to polymerize directly is due to the large amount of ionic work that has to be done in adding a single amino‐acid to a peptide chain. Tripeptides and higher peptides should be able to polymerize. A comparison is made between polyesters and polyamides. The formation of the amide group is accompanied by a large increase in entropy, 20–30 cal./mole degree, which is probably due mainly to the release of oriented water molecules held by the charged carboxyl and amino groups. Polyesters are formed by interaction between uncharged groups, so that the increase in entropy will be much smaller, and the conditions less favourable to polymer formation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The free energy of the peptide bond is around +3.5 kcal mol−1 under physiological conditions [46].”
From Polyesters as a Model System for Building Primitive Biologies from Non-Biological Prebiotic Chemistry (2020) · cites this paper as [46]
Citations
Cites
Fundamental Principles of Condensation Polymerization.
Flory, P. J. (1946) · Chemical Reviews · doi:10.1021/cr60122a003 · Cited by 584
163. The polymerization of 6-hexanolactam
Meggy, A. B. (1953) · Journal of the Chemical Society (Resumed) · doi:10.1039/jr9530000796 · Cited by 14
Self-citation1. Über polymeren Tetramethylenharnstoff. — 2. Über einige Pyrrol‐Derivate
Fischer, E. (1913) · Berichte der deutschen chemischen Gesellschaft · doi:10.1002/cber.19130460305 · Cited by 12
Künstliche organische Hochpolymere III. Zur Kenntnis der Polymethylenharnstoffe
Lieser, T., & Gehlen, H. (1944) · Justus Liebig s Annalen der Chemie · doi:10.1002/jlac.19445560112 · Cited by 7
Ableitung einer Dampfdruckgleichung aus der Temperaturabhängigkeit der Verdampfungswärme
de Wijs, J. C. (1943) · Recueil des Travaux Chimiques des Pays-Bas · doi:10.1002/recl.19430620708 · Cited by 2
Research works printed but not linked: 3
- Skuratov S. M., 1952, Dokl. obsch. Sobr. Ak. Nauk S.S.S.R., 86, 115
- Borsook H., 1940, J. biol. Chem., 132, 308
- Wrede F., 1910, Z. phys. Chem., 75, 92
Cited by
Synthesis and Chemical Properties of Poly-α-Amino Acids
Katchalski, E., & Sela, M. (1958) · Advances in Protein Chemistry · doi:10.1016/s0065-3233(08)60600-2 · Cited by 273
Chemical Recycling Processes of Nylon 6 to Caprolactam: Review and Techno-Economic Assessment
Minor, A.-J., Goldhahn, R., Rihko‐Struckmann, L., & Sundmacher, K. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.145333 · Cited by 112
Development of a quantitative theory of polycondensation
Kuchanov, S. I. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.02.001 · Cited by 114
Equilibria between polycapramide and water. I
Fukumoto, O. (1956) · Journal of Polymer Science · doi:10.1002/pol.1956.1202210109 · Cited by 59
Hermans, P. H., Heikens, D., & van Velden, P. F. (1955) · Journal of Polymer Science · doi:10.1002/pol.1955.120168230 · Cited by 54
Metadata
- Authors
- Meggy, A. B.
- Affiliations
- University of Leeds (GB)
- Corresponding author
- Meggy, A. B.
- Venue
- Journal of Applied Chemistry
- Publisher
- Wiley
- Published
- 1954-04
- Volume
- 4
- Issue
- 4
- Pages
- 154-159
- ISSN
- 0021-8871 (ISSN-L)
- 1934-998X
- OpenAlex
- W1995647193
- Cited by
- 31
- References
- 5
- Citations by year
- 2025: 1 · 2023: 1 · 2022: 3 · 2021: 2 · 2020: 2 · 2018: 1
- FWCI
- 5.93
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Applied Chemistry (publishedVersion)
- Topics
- Physical Sciences › Chemistry › Organic Chemistry › Chemical Thermodynamics and Molecular Structure
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Synthesis and Characterization
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- amide bond, Gibbs energy of formation, polyamide, degree of polymerization, water vapor partial pressure, cyclic monomers, diketopiperazines, polyglycine, caprolactam, polyamide 66, hexamethylenediamine, adipic acid, peptide chains
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.