The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Two‐photon stereolithography for realizing ultraprecise three‐dimensional nano/microdevices
Abstract
Two‐photon stereolithography (TPS) provides many advantages for achieving two‐dimensional (2D) and three‐dimensional (3D) micrometer‐scale polymeric, ceramic and metallic structures applicable to complicated optical and neo‐electronic microdevices. In the fabrication of high‐resolution 3D microstructures, TPS has significant advantages over conventional microelectromechanical system (MEMS) processing, which involves time‐consuming multistep indirect fabrication processes. Many studies have recently been made to develop and improve the TPS process, focusing on creating greater efficiency, higher resolution, and greater productivity, which are essential requirements of a practical TPS process. For the first time, an artistic microstructure has recently been successfully produced with an ultraprecise spatial resolution, sub‐30 nm nanofibers, 3D multilayer imprint stamps for mass production, and ceramic 3D microstructures. In this review, we report the progress of two‐photon polymerization based on 3D microfabrication, including the results obtained from the original research. This report is presented in three sections: improvement of resolution, precise design schemes, and applications of 3D microstructures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
Complex micromachines produced and driven by light
Galajda, P., & Ormos, P. (2001) · Applied Physics Letters · doi:10.1063/1.1339258 · Cited by 565
Cited by
Ultrafast laser nanostructuring of photopolymers: a decade of advances
Malinauskas, M., Farsari, M., Piskarskas, A., & Juodkazis, S. (2013) · Physics Reports · doi:10.1016/j.physrep.2013.07.005 · Cited by 431
Lab under the Skin: Microneedle Based Wearable Devices
Teymourian, H., Tehrani, F., Mahato, K., & Wang, J. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202002255 · Cited by 310
A review on fabricating tissue scaffolds using vat photopolymerization
Chartrain, N. A., Williams, C. B., & Whittington, A. R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.010 · Cited by 253
Zhou, S., Liu, G., Wang, C., Zhang, Y., Yan, C., & Shi, Y. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112632 · Cited by 150
Hsiao, A. Y., Tung, Y.-C., Kuo, C.-H., Mosadegh, B., Bedenis, R., Pienta, K. J., & Takayama, S. (2012) · Biomedical Microdevices · doi:10.1007/s10544-011-9608-5 · Cited by 129
Metadata
- Authors
- Park, S. ‐., Yang, D. ‐., & Lee, K. ‐.
- Venue
- Laser & Photonics Reviews
- Publisher
- Wiley
- Published
- 2009-02-19
- Volume
- 3
- Issue
- 1-2
- Pages
- 1-11
- ISSN
- 1863-8880 (ISSN-L)
- 1863-8899
- OpenAlex
- W2043046841
- Cited by
- 233
- References
- 3
- FWCI
- 7.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Two‐photon stereolithography for realizing ultraprecise three‐dimensional nano/microdevices. https://app.cochat.ai/papers/10.1002/lpor.200810027
- The paper
- Park, S. ‐., Yang, D. ‐., & Lee, K. ‐. (2009). Two‐photon stereolithography for realizing ultraprecise three‐dimensional nano/microdevices. Laser & Photonics Reviews. https://doi.org/10.1002/lpor.200810027
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
