The DOI matches its Crossref record.
Adsorption Kinetics and Thermodynamics of Acid Dyes on a Carboxymethylated Chitosan‐Conjugated Magnetic Nano‐Adsorbent
Abstract
Summary: The monodisperse chitosan‐conjugated Fe 3 O 4 nanoparticles with a mean diameter of 13.5 nm were fabricated by the carboxymethylation of chitosan and its covalent binding onto Fe 3 O 4 nanoparticles via carbodiimide activation. The carboxymethylated chitosan (CMCH)‐conjugated Fe 3 O 4 nanoparticles with about 4.92 wt.‐% of CMCH had an isoelectric point of 5.95 and were shown to be quite efficient as anionic magnetic nano‐adsorbent for the removal of acid dyes. Both the adsorption capacities of crocein orange G (AO12) and acid green 25 (AG25), as the model compounds, decreased with increasing pH, and the decreasing effect was more significant for AO12. On the contrary, the increase in the ionic strength decreased the adsorption capacity of AG25 but did not affect, obviously, the adsorption capacity of AO12. By the addition of NaCl and NaOH, both AO12 and AG25 could desorb and their different desorption behavior could be attributed to the combined effect of pH and ionic strength. From the adsorption kinetics and thermodynamics studies, it was found that both the adsorption processes of AO12 and AG25 obeyed the pseudo‐second‐order kinetic model, Langmuir isotherm, and might be surface reaction‐controlled. Furthermore, the time required to reach the equilibrium for each one was significantly shorter than those using the micro‐sized adsorbents due to the large available surface area. Also, based on the weight of chitosan, the maximum adsorption capacities were 1 883 and 1 471 mg · g−1 for AO12 and AG25, respectively, much higher than the reported data. Thus, the anionic magnetic nano‐adsorbent could not only be magnetically manipulated but also possessed the advantages of fast adsorption rate and high adsorption capacity. This could be useful in the fields of separation and magnetic carriers. Acid dyes adsorption onto the CMCH‐conjugated Fe 3 O 4 nanoparticles. magnified imageAcid dyes adsorption onto the CMCH‐conjugated Fe 3 O 4 nanoparticles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Crini, G., & Badot, P.-M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.11.001 · Cited by 2,350
Role of nanomaterials in water treatment applications: A review
Santhosh, C., Velmurugan, V., Jacob, G., Jeong, S. K., Grace, A. N., & Bhatnagar, A. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.08.053 · Cited by 1,256
Functional Materials in Food Nanotechnology
Weiss, J., Takhistov, P., & McClements, D. J. (2006) · Journal of Food Science · doi:10.1111/j.1750-3841.2006.00195.x · Cited by 1,104
Nasrollahzadeh, M., Sajjadi, M., Iravani, S., & Varma, R. S. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116986 · Cited by 718
Reddy, D. H. K., & Lee, S.-M. (2013) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2013.10.002 · Cited by 689
Smart polymeric gels: Redefining the limits of biomedical devices
Chaterji, S., Kwon, I. K., & Park, K. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.018 · Cited by 615
Preparation and properties of magnetic Fe3O4–chitosan nanoparticles
Li, G.-Y., Jiang, Y.-R., Huang, K.-L., Ding, P., & Chen, J. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2007.11.100 · Cited by 523
Fast removal of copper ions by gum arabic modified magnetic nano-adsorbent
Banerjee, S. S., & Chen, D.-H. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.079 · Cited by 510
Self-citationResearch progress of novel adsorption processes in water purification: A review
QU, J. (2008) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)60001-7 · Cited by 460
Gómez-Pastora, J., Bringas, E., & Ortiz, I. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.06.119 · Cited by 396
The Applications of Nanotechnology in Food Industry
Rashidi, L., & Khosravi-Darani, K. (2011) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408391003785417 · Cited by 379
Panneerselvam, P., Morad, N., & Tan, K. A. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.10.102 · Cited by 346
Nanostructures: Current uses and future applications in food science
Pathakoti, K., Manubolu, M., & Hwang, H.-M. (2017) · Journal of Food and Drug Analysis · doi:10.1016/j.jfda.2017.02.004 · Cited by 339
“These materials enhance solubility, improve bioavailability, facilitate controlled release, and protect bioactive components during manufacture and storage [27].”
BackgroundMagnetic Dendritic Materials for Highly Efficient Adsorption of Dyes and Drugs
Zhou, L., Gao, C., & Xu, W. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100114f · Cited by 328
Zhang, Y., Zhao, M., Cheng, Q., Wang, C., Li, H., Han, X., Fan, Z., Su, G., Pan, D., & Li, Z. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130927 · Cited by 325
Adsorption of organic pollutants by nanomaterial-based adsorbents: An overview
Awad, A. M., Jalab, R., Benamor, A., Nasser, M. S., Ba-Abbad, M. M., El-Naas, M., & Mohammad, A. W. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.112335 · Cited by 289
Ravichandran, R. (2010) · International Journal of Green Nanotechnology: Physics and Chemistry · doi:10.1080/19430871003684440 · Cited by 285
Nanotechnology: Current applications and future scope in food
Sahoo, M., Vishwakarma, S., Panigrahi, C., & Kumar, J. (2021) · Food Frontiers · doi:10.1002/fft2.58 · Cited by 280
Magnetite nanoparticles as sorbents for dye removal: a review
Panda, S. K., Aggarwal, I., Kumar, H., Prasad, L., Kumar, A., Sharma, A., Vo, D.-V. N., Van Thuan, D., & Mishra, V. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01173-9 · Cited by 274
Magnetic chitosan nanoparticles: Studies on chitosan binding and adsorption of Co(II) ions
Chang, Y.-C., Chang, S.-W., & Chen, D.-H. (2006) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2005.08.006 · Cited by 266
Self-citationLv, X., Xu, J., Jiang, G., Tang, J., & Xu, X. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.11.049 · Cited by 263
Nanomaterials for Remediation of Environmental Pollutants
Roy, A., Sharma, A., Yadav, S., Jule, L. T., & Krishnaraj, R. (2021) · Bioinorganic Chemistry and Applications · doi:10.1155/2021/1764647 · Cited by 258
Cao, C., Xiao, L., Chen, C., Shi, X., Cao, Q., & Gao, L. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.03.025 · Cited by 255
Nanoadsorbents for wastewater treatment: next generation biotechnological solution
Ali, M. E., Hoque, M. E., Safdar Hossain, S. K., & Biswas, M. C. (2020) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-020-02755-4 · Cited by 120
Metadata
- Authors
- Chang, Y., & Chen, D.
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2005-03-14
- Volume
- 5
- Issue
- 3
- Pages
- 254-261
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W1981102681
- Cited by
- 191
- References
- 0
- FWCI
- 8.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.