The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Recent Advances in Polyhydroxyalkanoate Production by Mixed Aerobic Cultures: From the Substrate to the Final Product
Abstract
Summary: Numerous bacteria have been found to exhibit the capacity for intracellular polyhydroxyalkanoates (PHA) accumulation. Current methods for PHA production at the industrial scale are based on their synthesis from microbial isolates in either their wild form or by recombinant strains. High production costs are associated with these methods; thus, attempts have been made to develop more cost‐effective processes. Reducing the cost of the carbon substrates (e.g., through feeding renewable wastes) and increasing the efficiency of production technologies (including both fermentation and downstream extraction and recovery) are two such examples of these attempts. PHA production processes based on mixed microbial cultures are being investigated as a possible technology to decrease production costs, since no sterilization is required and bacteria can adapt quite well to the complex substrates that may be present in waste material. PHA accumulation by mixed cultures has been found under various operational conditions and configurations at both bench‐scale and full‐scale production. The process known as “feast and famine” or as “aerobic dynamic feeding” seems to have a high potential for PHA production by mixed cultures. Enriched cultures submitted to a transient carbon supply can synthesize PHA at levels comparable to those of pure cultures. Indeed, the intracellular PHA content can reach around 70% of the cell dry weight, suggesting that this process could be competitive with pure culture PHA production when fully developed. Basic and applied research of the PHA production process by mixed cultures has been carried out in the past decade, focusing on areas such as microbial characterization, process configuration, reactor operational strategies, process modeling and control, and polymer characterization. This paper presents a review of the PHA production process with mixed cultures, encompassing the findings reported in the literature as well as our own experimental results in relation to each of these areas. Production of PHA by mixed cultures under feast and famine conditions. magnified imageProduction of PHA by mixed cultures under feast and famine conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Occurrence, metabolism, metabolic role, and industrial uses of bacterial polyhydroxyalkanoates
Anderson, A. J., & DAWES, E. A. (1990) · Microbiological Reviews · doi:10.1128/mmbr.54.4.450-472.1990 · Cited by 2,912
Synthesis, structure and properties of polyhydroxyalkanoates: biological polyesters
Sudesh, K., Abe, H., & Doi, Y. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00035-6 · Cited by 2,254
Diversity of bacterial polyhydroxyalkanoic acids
Steinbüchel, A., & Valentin, H. E. (1995) · FEMS Microbiology Letters · doi:10.1111/j.1574-6968.1995.tb07528.x · Cited by 981
Recent advances in microbial polyhydroxyalkanoates
Khanna, S., & Srivastava, A. K. (2005) · Process Biochemistry · doi:10.1016/j.procbio.2004.01.053 · Cited by 762
Gujer, W., Henze, M., Mino, T., & van Loosdrecht, M. (1999) · Water Science and Technology · doi:10.2166/wst.1999.0039 · Cited by 751
Polyhydroxyalkanoates, biopolyesters from renewable resources: Physiological and engineering aspects
Braunegg, G., Lefebvre, G., & Genser, K. F. (1998) · Journal of Biotechnology · doi:10.1016/s0168-1656(98)00126-6 · Cited by 536
Plastic bacteria? Progress and prospects for polyhydroxyalkanoate production in bacteria
Lee, S. Y. (1996) · Trends in Biotechnology · doi:10.1016/0167-7799(96)10061-5 · Cited by 529
Taxonomy of the genus Cupriavidus: a tale of lost and found
Vandamme, P. (2004) · INTERNATIONAL JOURNAL OF SYSTEMATIC AND EVOLUTIONARY MICROBIOLOGY · doi:10.1099/ijs.0.63247-0 · Cited by 523
Process analysis and economic evaluation for Poly(3-hydroxybutyrate) production by fermentation
Choi, J.-I., & Lee, S. Y. (1997) · Bioprocess Engineering · doi:10.1007/s004490050394 · Cited by 487
Serafim, L. S., Lemos, P. C., Oliveira, R., & Reis, M. A. M. (2004) · Biotechnology and Bioengineering · doi:10.1002/bit.20085 · Cited by 374
Self-citation
Cited by
Recent Advances and Challenges towards Sustainable Polyhydroxyalkanoate (PHA) Production
Kourmentza, C., Plácido, J., Venetsaneas, N., Burniol-Figols, A., Varrone, C., Gavala, H. N., & Reis, M. A. M. (2017) · Bioengineering · doi:10.3390/bioengineering4020055 · Cited by 779
Self-citationBiodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
The Chemomechanical Properties of Microbial Polyhydroxyalkanoates
Laycock, B., Halley, P., Pratt, S., Werker, A., & Lant, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.003 · Cited by 604
Suriyamongkol, P., Weselake, R., Narine, S., Moloney, M., & Shah, S. (2007) · Biotechnology Advances · doi:10.1016/j.biotechadv.2006.11.007 · Cited by 458
Yadav, J. S. S., Yan, S., Pilli, S., Kumar, L., Tyagi, R. D., & Surampalli, R. Y. (2015) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.07.002 · Cited by 425
Metadata
- Authors
- Dias, J. M. L., Lemos, P. C., Serafim, L. S., Oliveira, C., Eiroa, M., Albuquerque, M. G. E., Ramos, A. M., Oliveira, R., & Reis, M. A. M.
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2006-11-09
- Volume
- 6
- Issue
- 11
- Pages
- 885-906
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W1972954737
- Cited by
- 308
- References
- 61
- FWCI
- 5.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recent Advances in Polyhydroxyalkanoate Production by Mixed Aerobic Cultures: From the Substrate to the Final Product. https://app.cochat.ai/papers/10.1002/mabi.200600112
- The paper
- Dias, J. M. L., Lemos, P. C., Serafim, L. S., Oliveira, C., Eiroa, M., Albuquerque, M. G. E., Ramos, A. M., Oliveira, R., & Reis, M. A. M. (2006). Recent Advances in Polyhydroxyalkanoate Production by Mixed Aerobic Cultures: From the Substrate to the Final Product. Macromolecular Bioscience. https://doi.org/10.1002/mabi.200600112
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.