Compostability of Bioplastic Packaging Materials: An Overview
The DOI matches its Crossref record; 25 of the 29 references it cites were found in a registry or an index.
Abstract
Packaging waste accounted for 78.81 million tons or 31.6% of the total municipal solid waste (MSW) in 2003 in the USA, 56.3 million tons or 25% of the MSW in 2005 in Europe, and 3.3 million tons or 10% of the MSW in 2004 in Australia. Currently, in the USA the dominant method of packaging waste disposal is landfill, followed by recycling, incineration, and composting. Since landfill occupies valuable space and results in the generation of greenhouse gases and contaminants, recovery methods such as reuse, recycling and/or composting are encouraged as a way of reducing packaging waste disposal. Most of the common materials used in packaging (i.e., steel, aluminum, glass, paper, paperboard, plastics, and wood) can be efficiently recovered by recycling; however, if packaging materials are soiled with foods or other biological substances, physical recycling of these materials may be impractical. Therefore, composting some of these packaging materials is a promising way to reduce MSW. As biopolymers are developed and increasingly used in applications such as food, pharmaceutical, and consumer goods packaging, composting could become one of the prevailing methods for disposal of packaging waste provided that industry, governments, and consumers encourage and embrace this alternative. The main objective of this article is to provide an overview of the current situation of packaging compostability, to describe the main mechanisms that make a biopolymer compostable, to delineate the main methods to compost these biomaterials, and to explain the main standards for assessing compostability, and the current status of biopolymer labeling. Biopolymers such as polylactide and poly(hydroxybutyrate) are increasingly becoming available for use in food, medical, and consumer goods packaging applications. The main claims of these new biomaterials are that they are obtained from renewable resources and that they can be biodegraded in biological environments such as soil and compost. Although recycling could be energetically more favorable than composting for these materials, it may not be practical because of excessive sorting and cleaning requirements. Therefore, the main focus is to dispose them by composting. So far, there is no formal agreement between companies, governments and consumers as to how this packaging composting will take place; therefore, the main drivers for their use have been green marketing and pseudo‐environmental consciousness related to high fuel prices. Packaging compostability could be an alternative for the disposal of biobased materials as long as society as a whole is willing to formally address the challenge to clearly understand the cradle‐to‐grave life of a compostable package, and to include these new compostable polymers in food, manure, or yard waste composting facilities. magnified image
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Consequently, the degradation rate at ambient temperatures commonly found in agricultural production systems is slower for mulches containing PLA [43][44][45].”
From Soil-Biodegradable Plastic Mulches Undergo Minimal in-Soil Degradation in a Perennial Raspberry System after 18 Months (2020) · cites this paper as [43]
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Self-citationChandra, R. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00039-7 · Cited by 1,462
Amass, W., Amass, A., & Tighe, B. (1998) · Polymer International · doi:10.1002/(sici)1097-0126(1998100)47:2<89::aid-pi86>3.0.co;2-f · Cited by 1,001
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Self-citationKlüppel, H.-J. (1998) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02979337 · Cited by 752
Handbook of Biodegradable Polymers
(1998) · CRC Press eBooks · doi:10.1201/9780367802219 · Cited by 702
ISO 14042 Environmental management • Life cycle assessment • life cycle impact assessment
Ryding, S. O. (1999) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978514 · Cited by 689
Rynk, R. F. (1992) · Medical Entomology and Zoology · Cited by 684
Handbook of Polymer Degradation
Hamid, S. H. (2000) · CRC Press eBooks · doi:10.1201/9781482270181 · Cited by 593
ISO 14043: Environmental management · life cycle assessment · life cycle interpretation
Lecouls, H. (1999) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02979166 · Cited by 376
Research works printed but not linked: 50
- EPA, 2003, Municipal Solid Waste Generation, Recycling, and Disposal in the United States: Facts and Figures for 2003
- Biernbaum J. A., 2004, Compost Production and Use”, in: Upper Midwest Organic Farming Conference
- ASTM, 2004, D6400‐04.Standard Specification for Compostable Plastics
- European Committee for Standardization, 2000, EN 13432. Packaging – Requirements for Packaging Recoverable Through Composting And Biodegradation‐Test Scheme And Evaluation Criteria For The Final Acceptance Of Packaging, European Standard
- Kunzler C., 2001, Biocycle, 42, 30
- ASTM, 2004, D7075‐04. Standard Practice for Evaluating and Reporting Environmental Performance of Biobased Products
- R.Narayan “Drivers And Rationale For Use Of Biobased Materials Based On Life Cycle Assessment (LCA)” in: Global Plastics Environmental Conference Atlanta2004.
- Selke S. E. M., 2001, Modern Plastic Handbook, 107
- Stevens E. S., 2003, Biocycle, 24, 24
- Henton D. E., 2005, Natural Fibers, Biopolymers, and Biocomposites, 527
- 10.1023/a:1021808317416 · DOI
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- ASTM, 1998, D5338‐98e1. Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- ASTM, 1994, D5511‐94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High‐Solids Anaerobic‐Digestion Conditions
- ISO, 2005, 14853:2005(E). Plastics—Determination Of Ultimate Anaerobic Biodegradation Of Plastic Materials In An Aqueous System‐Method By Measurement Of Biogas Production
- Antler S., 2005, BioCycle, 46, 36
- Jackson M., 2000, Biocycle, 41, 64
- Chino M., 2001, Biocycle, 42, 61
- Goldstein N., 2005, BioCycle, 46, 19
- Goldstein N., 2005, BioCycle, 46, 20
- Wolfe J., 2005, Biocycle, 46, 51
- Wolfe J., 2006, BioCycle, 47, 14
- Kale G., 2005, Evaluation of Compostability of Commercially Available Biodegradable Packages in Real Composting Conditions
- Kale G., 2005, Comparison Of The Degradability Of Commercially Available Biodegradable Packages In Composting In Ambient Exposure Conditions
- Kale G., 2006, Packaging Technol. Sci., 19
- Orhan Y., 2004, Acta Chim. Slov., 51, 579
- Barth J., 1998, Biocycle, 39, 65
- Diaz L., 2005, Biocycle, 46, 36
- Page N., 2005, Biocycle, 46, 57
- Savage G., 2005, Biocycle, 46, 55
- Sherman R., 2005, Biocycle, 46, 45
- Rynk R., 2002, Biocycle, 43, 38
- ASTM, 2002, D6002‐96. Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics
- ISO, 1994, 11266:1994(E). Soil Quality‐Guidance On Laboratory Testing For Biodegradation Of Organic Chemicals In Soil Under Aerobic Conditions
- ISO, 1999, 14851:1999(E). Determination Of The Ultimate Aerobic Biodegradability Of Plastic Materials In An Aqueous Medium – Method By Measuring The Oxygen Demand In A Closed Respirometer
- ISO, 2005, 14852:1999/Cor. 1:2005(E). Determination Of The Ultimate Aerobic Biodegradability Of Plastic Materials In An Aqueous Medium – Method By Analysis Of Evolved Carbon Dioxide
- ASTM, 2002, D5951‐96. Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and CompostQuality Testing
- ASTM, 1996, D5988‐96. Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting
- ASTM, 2004, D5929‐96. Standard Test Method for Determining Biodegradability of Materials Exposed to Minicipal Solid Waste Composting Conditions by Compost Respirometry
- ASTM, 2004, D6954‐04. Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
- 1987, Standards Methods for the Examination of Water and Wastewater
- ISO, 2002, 16929:2002(E). Plastics – Determination Of The Degree Of Disintegration Of Plastic Materials Under Defined Composting Conditions In A Pilot‐Scale Test
- FTC, 2000, Complying with The Environmental Marketing Guides
- 2005, Green Labeling: A Global Guide for Marketers and Manufacturers
- ASTM, 2003, D6868‐03. Standard Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates
- DIN CERTCO, The Compostability Mark of European Bioplastics and DINCERTCO
- European Committee for Standardization, 1997, ISO 14040:1997 Environmental Management – Life Cycle Assessment – Principals and Framework
- 2003, Life Cycle Inventory And Life Cycle Assessment For Windrow Composting Systems
- Barlaz M. A., 2003, Biocycle, 44, 52
Cited by
Items 101–200 of 728
End-of-Life Options for (Bio)degradable Polymers in the Circular Economy
Sikorska, W., Musioł, M., Zawidlak-Węgrzyńska, B., & Rydz, J. (2021) · Advances in Polymer Technology · doi:10.1155/2021/6695140 · Cited by 107
Bridging Three Gaps in Biodegradable Plastics: Misconceptions and Truths About Biodegradation
Choe, S., Kim, Y., Won, Y., & Myung, J. (2021) · Frontiers in Chemistry · doi:10.3389/fchem.2021.671750 · Cited by 106
Restrepo, I., Medina, C., Meruane, V., Akbari‐Fakhrabadi, A., Flores, P., & Rodríguez‐Llamazares, S. (2018) · Polímeros · doi:10.1590/0104-1428.03117 · Cited by 106
Usage of Potential Micro-organisms for Degradation of Plastics
Rana, K. I. (2019) · Open Journal of Environmental Biology · doi:10.17352/ojeb.000010 · Cited by 104
Banerjee, R., & Ray, S. S. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100794 · Cited by 103
Calabrò, P. S., Fòlino, A., Fazzino, F., & Komilis, D. P. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121653 · Cited by 102
The Global Potato-Processing Industry: A Review of Production, Products, Quality and Sustainability
Hu, X., Jiang, H., Liu, Z., Gao, M., Liu, G., Tian, S., & Zeng, F. (2025) · Foods · doi:10.3390/foods14101758 · Cited by 102
Accinelli, C., Abbas, H. K., Bruno, V., Nissen, L., Vicari, A., Bellaloui, N., Little, N. S., & Shier, W. T. (2020) · Waste Management · doi:10.1016/j.wasman.2020.06.011 · Cited by 101
Ingrao, C., Gigli, M., & Siracusa, V. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.007 · Cited by 101
Starch-Based Edible Films and Coatings
Pelissari, F. M., Ferreira, D. C. M., Louzada, L. B., dos Santos, F., Corrêa, A. C., Moreira, F. K. V., & Mattoso, L. H. C. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-809440-2.00010-1 · Cited by 101
Bandini, F., Frache, A., Ferrarini, A., Taskin, E., Cocconcelli, P. S., & Puglisi, E. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01791-y · Cited by 99
Recent developments in bio-based polyethylene: Degradation studies, waste management and recycling
Burelo, M., Hernández‐Varela, J. D., Medina, D. I., & Treviño‐Quintanilla, C. D. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e21374 · Cited by 100
Hsien Hui, K. H. O. O., & Tan, R. B. H. (2010) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-010-0163-8 · Cited by 97
Masmoudi, F., Bessadok, A., Dammak, M., Jaziri, M., & Ammar, E. (2016) · Environmental Science and Pollution Research · doi:10.1007/s11356-016-7276-y · Cited by 96
A Review on Biodegradable Packaging Films from Vegetative and Food Waste
Gupta, P., Toksha, B. G., & Rahaman, M. (2022) · The Chemical Record · doi:10.1002/tcr.202100326 · Cited by 94
Kalita, N. K., Sarmah, A., Bhasney, S. M., Kalamdhad, A. S., & Katiyar, V. (2021) · Environmental Challenges · doi:10.1016/j.envc.2021.100030 · Cited by 93
Recent Advancements and Perspectives of Biodegradable Polymers for Supercapacitors
Wu, L. H., Shi, X., & Wu, Z. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202211454 · Cited by 93
Menčík, P., Přikryl, R., Stehnová, I., Melčová, V., Kontárová, S., Figalla, S., Alexy, P., & Bočkaj, J. (2018) · Materials · doi:10.3390/ma11101893 · Cited by 93
Kakadellis, S., Woods, J., & Harris, Z. M. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105529 · Cited by 92
Mechanical and Thermal Properties of Green Polylactide Composites with Natural Fillers
Lezak, E., Kulinski, Z., Masirek, R., Piórkowska, E., Pracellà, M., & Gadzinowska, K. (2008) · Macromolecular Bioscience · doi:10.1002/mabi.200800040 · Cited by 92
Muniyasamy, S., Reddy, M. M., Misra, M., & Mohanty, A. K. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.08.031 · Cited by 88
Green Nanocomposites Based on Thermoplastic Starch: A Review
Velasco, K. E. R., Utreras-Silva, C. A., Díaz‐Barrios, A., Sommer-Márquez, A. E., Tafur, J. P., & Michell, R. M. (2021) · Polymers · doi:10.3390/polym13193227 · Cited by 87
No zero burden assumption in a circular economy
Ilić, D. D., Eriksson, O., Ödlund, L., & Åberg, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.031 · Cited by 86
Release of butylated hydroxytoluene (BHT) from Poly(lactic acid) films
Ortiz-Vazquez, H., Shin, J., Soto‐Valdez, H., & Auras, R. A. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2011.03.006 · Cited by 86
Self-citationFormulating bioplastic composites for biodegradability, recycling, and performance: A Review
Hubbe, M. A., Lavoine, N., Lucia, L. A., & Dou, C. (2020) · BioResources · doi:10.15376/biores.16.1.hubbe · Cited by 85
Biobased foams for thermal insulation: material selection, processing, modelling, and performance
Mort, R., Vorst, K., Curtzwiler, G. W., & Jiang, S. (2021) · RSC Advances · doi:10.1039/d0ra09287h · Cited by 84
Poly(lactic acid)/nanocellulose biocomposites for sustainable food packaging
Jacob, J., Linson, N., Mavelil‐Sam, R., Maria, H. J., Pothan, L. A., Thomas, S., Kabdrakhmanova, S., & Laroze, D. (2024) · Cellulose · doi:10.1007/s10570-024-05975-w · Cited by 82
Brdlik, P. M., Borůvka, M., Běhálek, L., & Lenfeld, P. (2021) · Polymers · doi:10.3390/polym13040594 · Cited by 81
López‐Gil, A., Bellucci, F. S., Velasco, D. S., Ardanuy, M., & Rodríguez‐Pérez, M. Á. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.12.025 · Cited by 81
Preparation and characterization of biodegradable and compostable PLA/TPS/ESO compositions
Przybytek, A., Sienkiewicz, M., Kucińska‐Lipka, J., & Janik, H. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.06.016 · Cited by 81
Thermal and composting degradation of EVA/Thermoplastic starch blends and their nanocomposites
Sessini, V., Arrieta, M. P., Raquez, J., Dúbois, P., Kenny, J. M., & Peponi, L. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.11.025 · Cited by 80
Spinella, S., Samuel, C., Raquez, J., McCallum, S. A., Gross, R. A., & Dúbois, P. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01611 · Cited by 80
Elgarahy, A. M., Priya, A. K., Mostafa, H. Y., Zaki, E. G., Elsaeed, S. M., Muruganandam, M., & Elwakeel, K. Z. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.110993 · Cited by 77
Effect of the state of water and relative humidity on ageing of PLA films
Rocca-Smith, J. R., Chau, N. T., Champion, D., Brachais, C., Marcuzzo, E., Sensidoni, A., Piasente, F., Karbowiak, T., & Debeaufort, F. (2017) · Food Chemistry · doi:10.1016/j.foodchem.2017.02.113 · Cited by 77
Chah, C. N., Banerjee, A., Gadi, V. K., Sreedeep, S., & Katiyar, V. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.158311 · Cited by 76
End-of-life biodegradation? how to assess the composting of polyesters in the lab and the field
Mouhoubi, R., Lasschuijt, M., Carrasco, S. R., Gojżewski, H., & Wurm, F. R. (2022) · Waste Management · doi:10.1016/j.wasman.2022.09.025 · Cited by 76
A bibliometric analysis on packaging research: towards sustainable and healthy packages
López, N. V., & Boluda, I. K. (2020) · British Food Journal · doi:10.1108/bfj-03-2020-0245 · Cited by 74
Explaining attention and choice for origin labeled cheese by means of consumer ethnocentrism
Loo, E. J. V., Grebitus, C., & Roosen, J. (2019) · Food Quality and Preference · doi:10.1016/j.foodqual.2019.05.016 · Cited by 73
Study of marine debris around a tourist city in East China: Implication for waste management
Chen, H., Wang, S., Guo, H., Lin, H., Zhang, Y., Long, Z., & Huang, H. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.04.335 · Cited by 66
Experimentally Determined Hansen Solubility Parameters of Biobased and Biodegradable Polyesters
Patel, K. G., Maynard, R. K., Ferguson, L. S., Broich, M. L., Bledsoe, J. C., Wood, C. C., Crane, G. H., Bramhall, J. A., Rust, J. M., Williams-Rhaesa, A. M., et al. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c07284 · Cited by 72
Pantaloni, D., Shah, D. U., Baley, C., & Bourmaud, A. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109166 · Cited by 71
Huo, Y., Dijkstra, F. A., Possell, M., & Singh, B. (2023) · Soil Biology and Biochemistry · doi:10.1016/j.soilbio.2023.109257 · Cited by 72
Ge, J., Lu, W., Zhang, H., Gong, Y., Wang, J., Xie, Y., Chang, Q., & Deng, X. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.129200 · Cited by 70
Parveen, N., Naik, S. V. C. S., Vanapalli, K. R., & Sharma, H. B. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.173893 · Cited by 71
Biopolymers for packaging applications: An overview
Juikar, S. K., & Warkar, S. G. (2022) · Packaging Technology and Science · doi:10.1002/pts.2707 · Cited by 69
Subramani, G., & Manian, R. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.134596 · Cited by 69
Nanocellulose-Based Polymeric Blends for Food Packaging Applications
Arrieta, M. P., Fortunati, E., Burgos, N., Peltzer, M. A., López, J., & Peponi, L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00007-9 · Cited by 69
Musioł, M., Sikorska, W., Janeczek, H., Wałach, W., Hercog, A., Johnston, B., & Rydz, J. (2018) · Waste Management · doi:10.1016/j.wasman.2018.04.030 · Cited by 69
Structural changes of cassava starch and polylactic acid films submitted to biodegradation process
Salazar‐Sánchez, M. D. R., Campo-Erazo, S. D., Castillo, H. S. V., & Solanilla‐Duque, J. F. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.01.187 · Cited by 69
Brdlik, P. M., Novák, J., Borůvka, M., Běhálek, L., & Lenfeld, P. (2022) · Polymers · doi:10.3390/polym15010140 · Cited by 68
State-of-the-art biobased food packaging materials
Robertson, G. L. (2008) · Elsevier eBooks · doi:10.1533/9781845694784.1.3 · Cited by 68
Souza, P. M. S., Corroqué, N. A., Morales, A. R., Marin‐Morales, M. A., & Mei, L. H. I. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0604-0 · Cited by 68
Resurfacing and modernization of edible packaging material technology
Mkandawire, M., & Aryee, A. N. A. (2018) · Current Opinion in Food Science · doi:10.1016/j.cofs.2018.03.010 · Cited by 68
Fabrication and Characterization of Sweet Potato Starch-based Bioplastics Plasticized with Glycerol
Abdu, A. H. D., Pudjirahar, S., Karina, M., Putri, O. D., & Fauziyyah, R. H. (2018) · Journal of Biological Sciences · doi:10.3923/jbs.2019.57.64 · Cited by 68
Álvarez-Méndez, S. J., Ramos-Suárez, J. L., Ritter, A., González, J. M., & Pérez, Á. C. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e16691 · Cited by 67
As’habi, L., Jafari, S. H., Khonakdar, H. A., Boldt, R., Wagenknecht, U., & Heinrich, G. (2012) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2013.3 · Cited by 66
Doh, H., Dunno, K. D., & Whiteside, W. S. (2020) · Food Bioscience · doi:10.1016/j.fbio.2020.100795 · Cited by 66
Fazita, M. R. M., Jayaraman, K., Bhattacharyya, D., Hossain, M. S., Kassim, M. H. M., & Khalil, H. P. S. A. (2015) · Polymers · doi:10.3390/polym7081465 · Cited by 64
Cho, J. Y., Park, S. L., Kim, S. H., Jung, H. J., Cho, D. H., Kim, B. C., Bhatia, S. K., Gurav, R. G., Park, S., Park, K., et al. (2022) · Waste Management · doi:10.1016/j.wasman.2022.03.003 · Cited by 63
Challenges and opportunities in managing biodegradable plastic waste: A review
Mhaddolkar, N., Astrup, T. F., Tischberger-Aldrian, A., Pomberger, R., & Vollprecht, D. (2024) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x241279902 · Cited by 63
Ismail, H., & Zaaba, N. F. (2012) · Journal of Elastomers & Plastics · doi:10.1177/0095244312462163 · Cited by 63
Iglesias-Montes, M. L., Soccio, M., Luzi, F., Puglia, D., Gazzano, M., Lotti, N., Manfredi, L. B., & Cyras, V. P. (2021) · Polymers · doi:10.3390/polym13183171 · Cited by 62
Cassava starch-derived aerogels as biodegradable packaging materials
Joshi, P., Gupta, K., Uniyal, P., Jana, A., Banerjee, A., Kumar, N., Ghosh, D., Srivastava, M. K., Ray, A., & Khatri, O. P. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.127282 · Cited by 62
Use of bio-based polymers in agricultural exclusion nets: A perspective
Mukherjee, A., Knoch, S., Chouinard, G., Tavares, J. R., & Dumont, M. (2019) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2019.01.017 · Cited by 62
“Biodegradable” plastics: a myth of marketing?
Harding, K. G., Gounden, T., & Pretorius, S. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2016.12.027 · Cited by 61
Zaborowska, M., & Bernat, K. (2022) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x221105432 · Cited by 61
Compostable properties of antimicrobial bioplastics based on cinnamaldehyde cross-linked gliadins
Balaguer, M. P., Villanova, J., César, G., Gavara, R., & Hernández‐Muñoz, P. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.09.099 · Cited by 60
High performance nature of biodegradable polymeric nanocomposites for oil-well drilling fluids
Madkour, T. M., Fadl, S., Dardir, M. M., & Mekewi, M. A. (2015) · Egyptian Journal of Petroleum · doi:10.1016/j.ejpe.2015.09.004 · Cited by 59
Bioplastic Fibers from Gum Arabic for Greener Food Wrapping Applications
Padil, V. V. T., Senan, C., Wacławek, S., Černík, M., Agarwal, S., & Varma, R. S. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05896 · Cited by 59
Evolution of biobased and nanotechnology packaging – a review
Lindström, T., & Österberg, F. (2020) · Nordic Pulp & Paper Research Journal · doi:10.1515/npprj-2020-0042 · Cited by 58
Ritzen, L., Sprecher, B., Bakker, C. A., & Balkenende, R. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.107268 · Cited by 57
Lebarbé, T., Ibarboure, E., Gadenne, B., Alfos, C., & Cramail, H. (2013) · Polymer Chemistry · doi:10.1039/c3py00300k · Cited by 56
Biopolymer-Based Lightweight Materials for Packaging Applications
Hu, B. S. (2014) · ACS symposium series · doi:10.1021/bk-2014-1175.ch013 · Cited by 56
Vigil, M., Pedrosa-Laza, M., Cabal, J. V. Á., & Fernández, F. O. (2020) · Sustainability · doi:10.3390/su12177207 · Cited by 56
de Castro, T. R., de Macedo, D. C., Chiroli, D. M. D. G., da Silva, R. C., & Tebcherani, S. M. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02241-z · Cited by 56
Arrieta, M. P., Sessini, V., & Peponi, L. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.047 · Cited by 55
The Influence of Additives and Environment on Biodegradation of PHBV Biocomposites
Brdlik, P. M., Borůvka, M., Běhálek, L., & Lenfeld, P. (2022) · Polymers · doi:10.3390/polym14040838 · Cited by 55
Vaverková, M. D., Toman, F., Adamcová, D., & Kotovicová, J. (2012) · Ecological Chemistry and Engineering S · doi:10.2478/v10216-011-0025-8 · Cited by 55
PLA and Montmorilonite Nanocomposites: Properties, Biodegradation and Potential Toxicity
Souza, P. M. S., Morales, A. R., Marin‐Morales, M. A., & Mei, L. H. I. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0577-z · Cited by 55
Rosli, N. A., Ahmad, I. B., Anuar, F. H., & Abdullah, I. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.119 · Cited by 55
López‐Gil, A., Rodríguez‐Pérez, M. Á., de Saja, J. A., Bellucci, F. S., & Ardanuy, M. (2014) · Polímeros · doi:10.4322/polimeros.2014.054 · Cited by 54
Wu, C.-S., & Liao, H. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202002p · Cited by 54
Effect of starch type on the film properties of native starch based edible films
Wilfer, P. B., Giridaran, G., Jeevahan, J., Joseph, G. B., Kumar, G. S., & Thykattusserry, N. J. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.12.1118 · Cited by 54
Wu, C.-S. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.10.012 · Cited by 55
Chemical recycling of poly(lactic acid) via controlled degradation with protic (macro)molecules
Plichta, A., Lisowska, P., Kundys, A., Zychewicz, A., Dębowski, M., & Florjańczyk, Z. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.03.006 · Cited by 53
Mechanical recyclability of technical biopolymers: Potential and limits
Resch-Fauster, K., Klein, A., Blees, E. C., & Feuchter, M. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.10.017 · Cited by 53
Auras, R. A. (2010) · Wiley eBooks · doi:10.1002/0471440264.pst275 · Cited by 53
Self-citationAlgae-Based Bioplastic for Packaging: A Decade of Development and Challenges (2010–2020)
Yap, X. Y., Gew, L. T., Khalid, M., & Yow, Y. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02620-0 · Cited by 52
Exploring structure-activity relationships for polymer biodegradability by microorganisms
Kim, J. R., Thelusmond, J.-R., Albright, V. C., & Chai, Y. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.164338 · Cited by 52
Hybrid Biocomposites Based on Poly(Lactic Acid) and Silica Aerogel for Food Packaging Applications
Aragón-Gutiérrez, A., Arrieta, M. P., López‐González, M., Fernández‐García, M., & López, D. (2020) · Materials · doi:10.3390/ma13214910 · Cited by 52
Skoczinski, P., Krause, L., Raschka, A., Dammer, L., & Carus, M. (2020) · Methods in enzymology on CD-ROM/Methods in enzymology · doi:10.1016/bs.mie.2020.11.001 · Cited by 52
Vardar, S., Demirel, B., & Onay, T. T. (2022) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-021-09610-z · Cited by 52
Bandini, F., Taskin, E., Vaccari, F., Soldano, M., Piccinini, S., Frache, A., Remelli, S., Menta, C., Cocconcelli, P. S., & Puglisi, E. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2022.126934 · Cited by 52
Consumer Preference for Sustainable Attributes in Plants: Evidence from Experimental Auctions
Yue, C., Campbell, B., Hall, C. R., Behe, B. K., Dennis, J. H., & Khachatryan, H. (2015) · Agribusiness · doi:10.1002/agr.21435 · Cited by 51
Packaging and food sustainability
Licciardello, F., & Piergiovanni, L. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816449-5.00006-0 · Cited by 51
Kaiser, M. R., Anuar, H., Samat, N., & Razak, S. B. A. (2012) · Iranian Polymer Journal · doi:10.1007/s13726-012-0112-4 · Cited by 51
El‐Gendy, A., ABOUZEID, R. E., Salama, A., Diab, M. A., & El‐Sakhawy, M. (2017) · Egyptian Journal of Chemistry · doi:10.21608/ejchem.2017.1835.1153 · Cited by 50
Development of nanofibrous membrane from recycled polyethene terephthalate bottle by electrospinning
Hossaın, M. T., Shahid, M. A., & Ali, A. (2022) · OpenNano · doi:10.1016/j.onano.2022.100089 · Cited by 50
Effect of mold opening on the properties of PLA samples obtained by foam injection molding
Volpe, V., Filitto, M. D., Klofacova, V., Santis, F. D., & Pantani, R. (2017) · Polymer Engineering and Science · doi:10.1002/pen.24730 · Cited by 49
Saranti, T. F. D. S., Melo, P. T. S., Cerqueira, M. Â., Aouada, F. A., & de Moura, M. R. (2021) · Polymers · doi:10.3390/polym13244298 · Cited by 49
Metadata
- Authors
- Kale, G., Kijchavengkul, T., Auras, R., Rubino, M., Selke, S. E., & Singh, S. P.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2007-03-08
- Volume
- 7
- Issue
- 3
- Pages
- 255-277
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W1993021428
- Cited by
- 618
- References
- 29
- Citations by year
- 2026: 40 · 2025: 56 · 2024: 74 · 2023: 56 · 2022: 69 · 2021: 69 · 2020: 40 · 2019: 27 · 2018: 26 · 2017: 21 · 2016: 23 · 2015: 24 · 2014: 16 · 2013: 18 · 2012: 14
- FWCI
- 5.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Life Sciences › Agricultural and Biological Sciences › Soil Science › Composting and Vermicomposting Techniques
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Keywords
- compostability, bioplastic packaging, biopolymers, packaging waste, composting, polylactic acid, polyhydroxybutyrate, biodegradation, municipal solid waste, recycling, composting methods, green marketing, bio-based materials
- MeSH terms
- Biopolymers, Conservation of Natural Resources, Humans, Materials Testing, Plastics, Refuse Disposal, Societies, Soil, Molecular Structure, Product Packaging
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.