Compostability of Bioplastic Packaging Materials: An Overview
The DOI matches its Crossref record; 25 of the 29 references it cites were found in a registry or an index.
Abstract
Packaging waste accounted for 78.81 million tons or 31.6% of the total municipal solid waste (MSW) in 2003 in the USA, 56.3 million tons or 25% of the MSW in 2005 in Europe, and 3.3 million tons or 10% of the MSW in 2004 in Australia. Currently, in the USA the dominant method of packaging waste disposal is landfill, followed by recycling, incineration, and composting. Since landfill occupies valuable space and results in the generation of greenhouse gases and contaminants, recovery methods such as reuse, recycling and/or composting are encouraged as a way of reducing packaging waste disposal. Most of the common materials used in packaging (i.e., steel, aluminum, glass, paper, paperboard, plastics, and wood) can be efficiently recovered by recycling; however, if packaging materials are soiled with foods or other biological substances, physical recycling of these materials may be impractical. Therefore, composting some of these packaging materials is a promising way to reduce MSW. As biopolymers are developed and increasingly used in applications such as food, pharmaceutical, and consumer goods packaging, composting could become one of the prevailing methods for disposal of packaging waste provided that industry, governments, and consumers encourage and embrace this alternative. The main objective of this article is to provide an overview of the current situation of packaging compostability, to describe the main mechanisms that make a biopolymer compostable, to delineate the main methods to compost these biomaterials, and to explain the main standards for assessing compostability, and the current status of biopolymer labeling. Biopolymers such as polylactide and poly(hydroxybutyrate) are increasingly becoming available for use in food, medical, and consumer goods packaging applications. The main claims of these new biomaterials are that they are obtained from renewable resources and that they can be biodegraded in biological environments such as soil and compost. Although recycling could be energetically more favorable than composting for these materials, it may not be practical because of excessive sorting and cleaning requirements. Therefore, the main focus is to dispose them by composting. So far, there is no formal agreement between companies, governments and consumers as to how this packaging composting will take place; therefore, the main drivers for their use have been green marketing and pseudo‐environmental consciousness related to high fuel prices. Packaging compostability could be an alternative for the disposal of biobased materials as long as society as a whole is willing to formally address the challenge to clearly understand the cradle‐to‐grave life of a compostable package, and to include these new compostable polymers in food, manure, or yard waste composting facilities. magnified image
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Consequently, the degradation rate at ambient temperatures commonly found in agricultural production systems is slower for mulches containing PLA [43][44][45].”
From Soil-Biodegradable Plastic Mulches Undergo Minimal in-Soil Degradation in a Perennial Raspberry System after 18 Months (2020) · cites this paper as [43]
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Self-citationChandra, R. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00039-7 · Cited by 1,462
Amass, W., Amass, A., & Tighe, B. (1998) · Polymer International · doi:10.1002/(sici)1097-0126(1998100)47:2<89::aid-pi86>3.0.co;2-f · Cited by 1,001
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Self-citationKlüppel, H.-J. (1998) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02979337 · Cited by 752
Handbook of Biodegradable Polymers
(1998) · CRC Press eBooks · doi:10.1201/9780367802219 · Cited by 702
ISO 14042 Environmental management • Life cycle assessment • life cycle impact assessment
Ryding, S. O. (1999) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978514 · Cited by 689
Rynk, R. F. (1992) · Medical Entomology and Zoology · Cited by 684
Handbook of Polymer Degradation
Hamid, S. H. (2000) · CRC Press eBooks · doi:10.1201/9781482270181 · Cited by 593
ISO 14043: Environmental management · life cycle assessment · life cycle interpretation
Lecouls, H. (1999) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02979166 · Cited by 376
Research works printed but not linked: 50
- EPA, 2003, Municipal Solid Waste Generation, Recycling, and Disposal in the United States: Facts and Figures for 2003
- Biernbaum J. A., 2004, Compost Production and Use”, in: Upper Midwest Organic Farming Conference
- ASTM, 2004, D6400‐04.Standard Specification for Compostable Plastics
- European Committee for Standardization, 2000, EN 13432. Packaging – Requirements for Packaging Recoverable Through Composting And Biodegradation‐Test Scheme And Evaluation Criteria For The Final Acceptance Of Packaging, European Standard
- Kunzler C., 2001, Biocycle, 42, 30
- ASTM, 2004, D7075‐04. Standard Practice for Evaluating and Reporting Environmental Performance of Biobased Products
- R.Narayan “Drivers And Rationale For Use Of Biobased Materials Based On Life Cycle Assessment (LCA)” in: Global Plastics Environmental Conference Atlanta2004.
- Selke S. E. M., 2001, Modern Plastic Handbook, 107
- Stevens E. S., 2003, Biocycle, 24, 24
- Henton D. E., 2005, Natural Fibers, Biopolymers, and Biocomposites, 527
- 10.1023/a:1021808317416 · DOI
- 10.1023/a:1022874530586 · doi:10.1023/a:1022874530586
- ASTM, 1998, D5338‐98e1. Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions
- 10.1023/a:1021869530253 · doi:10.1023/a:1021869530253
- ASTM, 1994, D5511‐94 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High‐Solids Anaerobic‐Digestion Conditions
- ISO, 2005, 14853:2005(E). Plastics—Determination Of Ultimate Anaerobic Biodegradation Of Plastic Materials In An Aqueous System‐Method By Measurement Of Biogas Production
- Antler S., 2005, BioCycle, 46, 36
- Jackson M., 2000, Biocycle, 41, 64
- Chino M., 2001, Biocycle, 42, 61
- Goldstein N., 2005, BioCycle, 46, 19
- Goldstein N., 2005, BioCycle, 46, 20
- Wolfe J., 2005, Biocycle, 46, 51
- Wolfe J., 2006, BioCycle, 47, 14
- Kale G., 2005, Evaluation of Compostability of Commercially Available Biodegradable Packages in Real Composting Conditions
- Kale G., 2005, Comparison Of The Degradability Of Commercially Available Biodegradable Packages In Composting In Ambient Exposure Conditions
- Kale G., 2006, Packaging Technol. Sci., 19
- Orhan Y., 2004, Acta Chim. Slov., 51, 579
- Barth J., 1998, Biocycle, 39, 65
- Diaz L., 2005, Biocycle, 46, 36
- Page N., 2005, Biocycle, 46, 57
- Savage G., 2005, Biocycle, 46, 55
- Sherman R., 2005, Biocycle, 46, 45
- Rynk R., 2002, Biocycle, 43, 38
- ASTM, 2002, D6002‐96. Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics
- ISO, 1994, 11266:1994(E). Soil Quality‐Guidance On Laboratory Testing For Biodegradation Of Organic Chemicals In Soil Under Aerobic Conditions
- ISO, 1999, 14851:1999(E). Determination Of The Ultimate Aerobic Biodegradability Of Plastic Materials In An Aqueous Medium – Method By Measuring The Oxygen Demand In A Closed Respirometer
- ISO, 2005, 14852:1999/Cor. 1:2005(E). Determination Of The Ultimate Aerobic Biodegradability Of Plastic Materials In An Aqueous Medium – Method By Analysis Of Evolved Carbon Dioxide
- ASTM, 2002, D5951‐96. Standard Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and CompostQuality Testing
- ASTM, 1996, D5988‐96. Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting
- ASTM, 2004, D5929‐96. Standard Test Method for Determining Biodegradability of Materials Exposed to Minicipal Solid Waste Composting Conditions by Compost Respirometry
- ASTM, 2004, D6954‐04. Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
- 1987, Standards Methods for the Examination of Water and Wastewater
- ISO, 2002, 16929:2002(E). Plastics – Determination Of The Degree Of Disintegration Of Plastic Materials Under Defined Composting Conditions In A Pilot‐Scale Test
- FTC, 2000, Complying with The Environmental Marketing Guides
- 2005, Green Labeling: A Global Guide for Marketers and Manufacturers
- ASTM, 2003, D6868‐03. Standard Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates
- DIN CERTCO, The Compostability Mark of European Bioplastics and DINCERTCO
- European Committee for Standardization, 1997, ISO 14040:1997 Environmental Management – Life Cycle Assessment – Principals and Framework
- 2003, Life Cycle Inventory And Life Cycle Assessment For Windrow Composting Systems
- Barlaz M. A., 2003, Biocycle, 44, 52
Cited by
Items 401–500 of 728
Poly(hydroxyalkanoates) (PHAs) based circular materials for a sustainable future
Muiruri, J. K., Yeo, J. C. C., Loh, X. J., Chen, G., He, C., & Li, Z. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91198-6.00002-4 · Cited by 10
Frącz, W., Pacana, A., Siwiec, D., Janowski, G., & Bąk, Ł. (2023) · Materials · doi:10.3390/ma17010055 · Cited by 10
Biodegradation of poly(lactic acid) waste from 3D printing
Benhami, V. M. L., de Oliveira-Longatti, S. M., Moreira, F. M. D. S., & Neto, A. R. D. S. (2024) · Polímeros · doi:10.1590/0104-1428.20230058 · Cited by 10
Méité, N., Kouakou, L. P. M.-S., Kouamé, A. N., Kouassi, S. S., Silva, C. S. E., Sandé, S. L. S., Pereira, S. D. F. P., & Konan, L. K. (2024) · Journal of the Indian Chemical Society · doi:10.1016/j.jics.2024.101185 · Cited by 10
Transformative Influence of Disruptive Innovations on Markets and Business Performance
Narula, S., & Sabharwal, D. (2024) · Emerald Group Publishing Limited eBooks · doi:10.1108/s2754-586520240000003009 · Cited by 10
Lyshtva, P., Voronova, V., Kuusik, A., & Kobets, Y. (2025) · AppliedChem · doi:10.3390/appliedchem5030017 · Cited by 10
Biodegradation of Yerba Mate Waste Based Fertilizer Capsules. Effect of Temperature
Llive, L., Bruno, E., García, A. D. M., Teixeira, A. S., & Deladino, L. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01433-y · Cited by 10
Biofertilizers from Food and Agricultural By‐Products and Wastes
Arumugam, V., Ismail, M. H., & Routray, W. (2021) · Wiley eBooks · doi:10.1002/9781119771951.ch13 · Cited by 10
Food contact materials legislation
Ariosti, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-816011-4.00007-0 · Cited by 10
Uncovering the potential of landfill leachate for biodegradation of cassava-derived plastics
Žorža, L., Gudrā, D., Sīpola, K., Vonda, K., Frīdmanis, D., Kalniņa, I., Bartkevičs, V., Dēliņa, A., Grīnbergs, A., & Muter, O. (2023) · Bioresource Technology Reports · doi:10.1016/j.biteb.2023.101628 · Cited by 10
Sikorska, W., Musioł, M., Rydz, J., Kowalczuk, M. M., & Adamus, G. (2019) · Polimery · doi:10.14314/polimery.2019.11.11 · Cited by 10
Hybrid Plastics and Natural Materials
Roy, A., Naskar, A., Ghosh, A., Adhikari, J., Saha, P., & Ghosh, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00075-4 · Cited by 10
Macnamara, J. F., Vallery, R. S., Gidley, D. W., & Auras, R. A. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.56986 · Cited by 9
Self-citationFood hydrocolloids: Classification, functional properties and applications
Nepovinnykh, N. V., & Петрова, О. (2025) · Food systems · doi:10.21323/2618-9771-2025-8-1-66-72 · Cited by 9
Bellon, J., Bacoup, F., & Gattin, R. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.121600 · Cited by 9
Miao, W., Cheng, W., Xu, S., Wang, R., Yao, J., Song, W., Lin, H., Shang, M., & Zhou, X. (2022) · International Polymer Processing · doi:10.1515/ipp-2022-4219 · Cited by 9
Microbial attachment studies on “plastic-specific” microorganisms
Pant, S., & Valapa, R. B. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-89858-4.00009-9 · Cited by 9
Universiti Sains Malaysia, M., Alias, N. F., Ismail, H., & Universiti Sains Malaysia, M. (2020) · Journal of Physical Science · doi:10.21315/jps2020.31.2.4 · Cited by 9
Microalgae as a Renewable Resource for Bioplastic Production
Ali, S. S., Dar, M. A., El-Sheekh, M. M., Elsamahy, T., Abdelfattah, A., Abdelkarim, E. A., Pispas, K., Mastropetros, S. G., Zagklis, D. P., Kornaros, M. E., et al. (2022) · Practice, progress, and proficiency in sustainability · doi:10.4018/978-1-6684-2438-4.ch019 · Cited by 9
Nanocellulose-Based Biodegradable Bend Sensors
Naidonov, A., Koval, V. M., Barbash, V., Dusheіko, M., Yashchenko, O. V., & Yakymenko, O. (2022) · IEEE International Conference on Electronics and Nanotechnology (ELNANO) · doi:10.1109/elnano54667.2022.9927070 · Cited by 9
Bioremediation of Synthetic Polymers: Present and Future Prospects of Plastic Biodegradation
Mishra, U. N., Das, S., & Kandali, R. (2020) · International Journal of Current Microbiology and Applied Sciences · doi:10.20546/ijcmas.2020.912.152 · Cited by 9
Decoloured Bloodmeal Based Bioplastic
Low, A. (2012) · Research Commons (University of Waikato) · Cited by 9
Lebarbé, T. (2013) · theses.fr (ABES) · doi:10.70675/06479c91z6b0dz433azab51z3e66c66837d9 · Cited by 9
Morreale, M., Baiamonte, M., Correnti, A., Messina, S., & La Mantia, F. P. (2024) · Polymer International · doi:10.1002/pi.6630 · Cited by 8
Bakhtiari, S. S. E., Salehiyan, R., Sasi, A., Shyha, I., & Sun, D. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500108 · Cited by 8
Chou, Z.-C., Lai, Y.-R., Hsu, J.-T., How, S.-C., Lin, T.-H., & Wang, S. S. ‐. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.150095 · Cited by 8
A Sustainable Approach to Plastics; Bioplastics
ERKUL, Ş. N., Karahan, M., & Arı, A. (2023) · RECENT - REzultatele CErcetărilor Noastre Tehnice · doi:10.31926/recent.2023.69.029 · Cited by 8
Bettelli, M. A., Traissac, E., Latras, A., Jiménez‐Rosado, M., Guerrero, A. F., Olsson, R. T., Hedenqvist, M. S., & Capezza, A. J. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142419 · Cited by 8
Paul, C. S., Stefanović, L., Robledo-Mahón, T., Mercl, F., Száková, J., & Tlustoš, P. (2024) · Plant Soil and Environment · doi:10.17221/416/2024-pse · Cited by 8
Developing eco-friendly bio-plastics from natural sources for sustainable packaging
Marichelvam, M. K., Kanadakodeeeswaran, K., Dheenesh, D., Easwarapandiyan, S., & Lokeshkumar, B. (2025) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2025.102105 · Cited by 8
Green and Smart Packaging of Food
Gökşen, G., Boyacı, D., & Tucker, N. (2022) · Wiley eBooks · doi:10.1002/9781119789444.ch5 · Cited by 8
Raghuwanshi, S., Zaidi, M. G. H., Kumar, S., & Goel, R. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-1159-2 · Cited by 8
Plastics Biodegradation and Biofragmentation
Menofy, N. G. E., & Khattab, A. M. (2022) · Springer eBooks · doi:10.1007/978-3-030-83783-9_22-1 · Cited by 8
Effect of birch tar embedded in polylactide on its biodegradation
Richert, A., Kalwasińska, A., Jankiewicz, U., & Brzezinska, M. S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124226 · Cited by 8
Cespi, D. (2023) · Sustainable Chemistry · doi:10.3390/suschem4020014 · Cited by 8
Zhang, H., Shao, Y., Li, T., Liu, W., Huang, Y., Jiang, Y., Wang, Z., & Xiao, X. (2025) · Environmental Pollution · doi:10.1016/j.envpol.2025.127111 · Cited by 7
Burd, B. S., Trombotto, B., da Cunha, G. E. R., Floriano, J. F., Garcia, M. T., Brasil, G. S. P., dos Santos, L. S., Guerra, N. B., Polanczyk, R. A., Persinoti, G. F., et al. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.122471 · Cited by 7
Barbir, J., Lingos, A., Foschi, E., Stasiškienė, Ž., Skanavis, C., Fletcher, C. A., & Filho, W. L. (2024) · Discover Sustainability · doi:10.1007/s43621-024-00428-7 · Cited by 7
Biopolymers for Food Packaging
Biswal, T., Sethy, T. R., & Sahoo, P. K. (2024) · ACS symposium series · doi:10.1021/bk-2024-1486.ch008 · Cited by 7
Pereira, B. A. M., Martins, N. O., Dantas, S. C., & de Lima, A. M. (2025) · Sustainability Science and Technology · doi:10.1088/2977-3504/adbdd2 · Cited by 7
Goudali, L., Belouaggadia, N., Nagoor, B. S., Zamma, A., & Elfarissi, L. (2025) · Hybrid Advances · doi:10.1016/j.hybadv.2025.100519 · Cited by 7
Alias, N. F., Ismail, H., Wahab, M. K. A., Santiagoo, R., Ardhyananta, H., & Ting, S. S. (2018) · BioResources · doi:10.15376/biores.13.3.5711-5724 · Cited by 7
Microbial technologies in textile industries: an elixir for the greener environment
Shukla, A., Parmar, P., Goswami, D., Gehlot, Y., Vala, J., Parmar, N., & Saraf, M. S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-323-85204-3.00028-2 · Cited by 7
Sharada, D., Naresh, U., Shiva, K. V., & Kumar, R. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-823827-1.00007-9 · Cited by 7
Degradable plastics and their potential for affecting solid waste systems
Greene, K., & Tonjes, D. J. (2014) · WIT transactions on ecology and the environment · doi:10.2495/wm140081 · Cited by 7
Bio-Sourced Polymers: Recent Advances
Cramail, H., Bizet, B., Lamarzelle, O., Durand, P.-L., Hibert, G., & Grau, É. (2020) · Series on chemistry, energy and the environment · doi:10.1142/9789811210587_0005 · Cited by 7
Christwardana, M., Ismojo, I., & Marsudi, S. (2022) · Molekul · doi:10.20884/1.jm.2022.17.1.5591 · Cited by 7
Boonyod, S., Pivsa‐Art, W., Nanthananon, P., Kwon, Y. K., & Pivsa‐Art, S. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02804-2 · Cited by 7
Empaques vs Bioempaques para alimentos: Una comparación a nivel técnica, comercial y normativa
Acosta-Medina, J. K., Pacheco, O. E. C., & Avella, A. C. P. (2023) · Ingeniería y Competitividad · doi:10.25100/iyc.v25i3.13066 · Cited by 7
Overview of Biodegradable Packaging, Methods, and Current Trends
Kale, G. (2011) · Wiley eBooks · doi:10.1002/9781118056806.ch21 · Cited by 7
Self-citationPolymer‐Based Nanocomposites for Food Packaging Applications
Avella, M., Avolio, R., Pace, E. D., Errico, M. E., Gentile, G., & Volpe, M. G. (2013) · Wiley eBooks · doi:10.1002/9781118451915.ch11 · Cited by 7
Parliamentary Office of Science and Technology, Wood, C., & Border, P. (2019) · doi:10.58248/pn605 · Cited by 7
Doh, H. (2020) · TigerPrints (Clemson University) · Cited by 7
DÖNGÜSEL EKONOMİ: AVRUPA BİRLİĞİ ÇALIŞMALARI
Özdemir, Z. H. A., & Gür, B. (2024) · İstanbul Ticaret Üniversitesi Sosyal Bilimler Dergisi · doi:10.46928/iticusbe.1474221 · Cited by 6
Grossule, V., Conti, G. O., Rapisarda, P., Pulvirenti, E., Ferrante, M., & Lavagnolo, M. C. (2024) · Journal of Environmental Management · doi:10.1016/j.jenvman.2024.122768 · Cited by 6
Biodegradation of plastics—An overview
Habib, T., Muhammad, M., Liu, Y., Fang, B., & Li, W.-J. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-21911-5.00011-8 · Cited by 6
Plastics Biodegradation: The Situation Now and Its Potential Effects on Environmental Safety
Igiebor, F. A., Jonathan, E., Haruna, O., & Alenkhe, B. I. (2024) · Journal of applied science and environmental management · doi:10.4314/jasem.v28i1.19 · Cited by 6
Ouahioune, L. A., Wrona, M., Pezo, D., Nerín, C., & Djenane, D. (2024) · Food Bioscience · doi:10.1016/j.fbio.2024.105647 · Cited by 6
Li, J., Liu, W., Chang, A., Foudeh, Z., Yu, J., Wei, P., Chen, K., Hu, C., Dhatt, P. S., Dai, S. Y., et al. (2025) · Green Chemistry · doi:10.1039/d4gc02440k · Cited by 6
Biopolymers to mitigate the environmental impact
Montecinos, S., Ascazuri, M., Achaga, J., Viduzzi, G., & Tognana, S. (2019) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · Cited by 6
Biomass-Derived Polyurethanes for Sustainable Future
de Souza, F. M., Kahol, P. K., & Gupta, R. K. (2021) · Advances in Science, Technology & Innovation/Advances in science, technology & innovation · doi:10.1007/978-3-030-67884-5_1 · Cited by 6
Alganyl: Cocinando ropa sustentable
Bell, F., McQuaid, E., & Alistar, M. (2022) · Revista Diseña · doi:10.7764/disena.20.article.4 · Cited by 6
Gandía, R. C., Martínez, J. I., Agüero, Á., Quiles‐Carrillo, L., Gómez-Caturla, J., Fenollar, O., & Arrieta, M. P. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-90939-6.00002-9 · Cited by 6
Evidential role of municipal solid waste and liquid effluent on environment and public health
Ali, M. R., Mahmud, S., Islam, M. T., Alam, M. N. E., Molla, M. T., Mohiuddin, R. B., Talukder, K. A., Napis, S. B., Chowdhury, K., & Mohiuddin, A. K. M. (2023) · Environmental Quality Management · doi:10.1002/tqem.22074 · Cited by 6
Yuan, M. W., Qin, Y., Yang, J. Y., Wu, Y. Q., Yuan, M. L., & Li, H. L. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.779-780.231 · Cited by 6
Recent Trends to Address Plastic Waste at the Global Level
Rodríguez, L. V. C., & Fernández, C. (2022) · Springer eBooks · doi:10.1007/978-981-16-5403-9_5 · Cited by 6
Packaging, Cosmetics and Pharmaceuticals
Rosette, J. L., Yablonski, J. I., Mancuso, S. E., & Kale, G. (2012) · Wiley eBooks · doi:10.1002/0471238961.0315191318151905.a01.pub3 · Cited by 6
Self-citationPolylactic acid: a chemically derived polymers for sustainable packaging
Łopusiewicz, Ł., & Macieja, S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13567-5.00004-6 · Cited by 5
Oliva‐Albert, M., Bellostas‐Carreras, A., Guijosa‐Ortega, J. L., Doménech‐Pascual, A., Boadella, J., Casas‐Ruiz, J. P., Pineda‐Morante, D., Menard, Y., Ayuso, L., Lupon, A., et al. (2025) · Limnology and Oceanography · doi:10.1002/lno.70107 · Cited by 5
Comparison of decomposition of biodegradable mulching films under variable soil microbial conditions
Kim, S. J., Shim, J.-Y., Park, K. M., Park, D. I., Heo, N. Y., Hwang, S. J., Park, S. H., Chung, H. W., Lee, J. M., & Chung, H. (2025) · Frontiers in Microbiology · doi:10.3389/fmicb.2025.1674576 · Cited by 5
dos Santos, M. P. P., Vita, N. D. A., Saorin, F., Camlofski, T., Alves, W. F., Schuck, D. C., Raota, C. S., dos Santos, S. L., Steckel, L., Araujo, D. R., et al. (2025) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2025.140586 · Cited by 5
Li, F., Zhang, X., Wu, D., Chen, Z., Tan, Y., Wang, Y., Zhang, W., & Bol, R. (2025) · Applied Soil Ecology · doi:10.1016/j.apsoil.2025.106452 · Cited by 5
Standards issues toward bioplastics
Painuli, R., Raghav, S., & Kumar, D. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95199-9.00010-x · Cited by 5
Santini, G., Zizolfi, M., Santorufo, L., Memoli, V., D’Ascoli, R., & Maisto, G. (2024) · Soil Systems · doi:10.3390/soilsystems8030092 · Cited by 5
Functionalized Jute Fabric Integrated With Recycled PET Nanomat for Packaging Applications
Shahid, M. A., Hossain, I., Uddin, M. M., Hossaın, M. T., & Limon, M. G. M. (2025) · Packaging Technology and Science · doi:10.1002/pts.2915 · Cited by 5
Polymers and Microplastics: Implications on Our Environment and Sustainability
Sharma, V. P. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.89571 · Cited by 5
Combatting Plastic Pollution in Natural Environments: Innovative Solutions Offered by Microbes
Mohanty, S. S., Maharana, J., & Pandey, S. (2024) · Energy, environment, and sustainability · doi:10.1007/978-981-97-1152-9_6 · Cited by 5
Rämö, V., Raipale, N., Hiipakka, M., Kamppuri, T., Paunonen, S., & Tehrani‐Bagha, A. R. (2024) · Journal of Engineered Fibers and Fabrics · doi:10.1177/15589250241287869 · Cited by 5
Bioplastics advances and their role in the management of plastic pollution
Sharma, N., Akhtar, S., & Khan, M. K. A. (2021) · NeuroPharmac Journal · doi:10.37881/1.620 · Cited by 5
Application in the Field of Commodity and Industry Product
Ren, J. (2010) · Springer eBooks · doi:10.1007/978-3-642-17596-1_6 · Cited by 5
Formalisation des relations structure/propriétés de transfert de matière dans un biocomposite modèle
Thoury-Monbrun, V. (2018) · theses.fr (ABES) · doi:10.70675/be8b4dc6z0d1fz4b8dza969z6d9953c6564c · Cited by 5
Hobbs, S. R. (2017) · TigerPrints (Clemson University) · Cited by 5
Vásquez-Bacilio, E. F., Mejia-Llontop, C. I., Tirado-Rodríguez, C. E., Arévalo-Oliva, M. D. F., Hurtado-Soria, B. Z., Villanueva, E., Rodríguez, G., Tapia‐Blácido, D. R., & Aguirre, E. (2025) · Polymers · doi:10.3390/polym17152146 · Cited by 4
Wang, S., Hussain, A., Fei, X., Venkiteshwaran, K., & Raghavan, V. (2025) · Fermentation · doi:10.3390/fermentation11110610 · Cited by 4
Genovesi, A., di Villagrazia, M. M., & Barletta, M. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.58179 · Cited by 4
Dara, M., Torregrossa, N., Corte, C. L., Bisanti, L., Bertini, F., Parrinello, D., Parisi, M., & Cammarata, M. (2024) · Invertebrate survival journal · doi:10.25431/1824-307x/isj.v21i1.127-142 · Cited by 3
Approaches for Enhancing Microbial Degradation of Synthetic Plastics: A Review
shmi, R., Kumar, R., & Pathak, D. V. (2020) · International Journal of Current Microbiology and Applied Sciences · doi:10.20546/ijcmas.2020.901.101 · Cited by 4
Borrowman, C. K., Adhikari, R., Saito, K., Gordon, S., & Patti, A. F. (2024) · Agriculture · doi:10.3390/agriculture14112062 · Cited by 4
Rheological and Mechanical Properties and Spinning Behavior of a Starch-Based Biodegradable Polymer
Morreale, M., Baiamonte, M., & Mantia, F. P. L. (2024) · Polymers · doi:10.3390/polym16233306 · Cited by 4
Summa, D., Tamisari, E., Lanzoni, M., Castaldelli, G., & Tamburini, E. (2025) · Resources · doi:10.3390/resources14010010 · Cited by 4
Assessment and Solutions for Waste Handling of Compostable Biopolymers
Hottle, T. A. (2015) · doi:10.13140/rg.2.1.1850.2489 · Cited by 4
Pokhrel, S., Limbu, S. K., & Subedi, S. (2022) · Macromolecular Symposia · doi:10.1002/masy.202200063 · Cited by 4
Back, H. D. M., Pottmaier, D., Andreusi, C. K., & Alarcon, O. E. (2023) · Environmental Science Advances · doi:10.1039/d3va00106g · Cited by 4
Bacterial and fungal mechanism of plastic degradation
Acharya, A., Poudel, S., Angove, M. J., Treichel, H., & Paudel, S. R. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-23599-3.00015-0 · Cited by 4
Potential Perspectives and Sustainability of Bioplastics Developed from Horticulture
Saini, P., Iqbal, U., & Ahmed, M. (2023) · Recent Advances in Food Nutrition & Agriculture · doi:10.2174/2772574x14666230220143602 · Cited by 4
Degradation of poly(vinyl alcohol)‐graft‐lactic acid copolymers by T richotecium roseum fungus
Lipşa, R., Tudorachi, N., Grigoraş, V. C., & Vasile, C. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41777 · Cited by 4
Sagapová, N. (2022) · Economics Working Papers · doi:10.32725/ewp.2022.001 · Cited by 4
Pepic, D., Radoičić, M. B., Nikolić, M. S., & Djonlagić, J. (2007) · Journal of the Serbian Chemical Society · doi:10.2298/jsc0712515p · Cited by 4
Schäumen und Pulverisieren ausgewählter Biopolymere
Frerich, S. (2011) · Dokumentenrepositorium der RUB (Ruhr University Bochum) · Cited by 4
Shakaroun, R. M. (2021) · theses.fr (ABES) · doi:10.70675/2f088127z472bz4b2fzb9bfza1f8d1bdb9b1 · Cited by 4
Metadata
- Authors
- Kale, G., Kijchavengkul, T., Auras, R., Rubino, M., Selke, S. E., & Singh, S. P.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Auras, Rafael
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2007-03-08
- Volume
- 7
- Issue
- 3
- Pages
- 255-277
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W1993021428
- Cited by
- 618
- References
- 29
- Citations by year
- 2026: 40 · 2025: 56 · 2024: 74 · 2023: 56 · 2022: 69 · 2021: 69 · 2020: 40 · 2019: 27 · 2018: 26 · 2017: 21 · 2016: 23 · 2015: 24 · 2014: 16 · 2013: 18 · 2012: 14
- FWCI
- 5.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Life Sciences › Agricultural and Biological Sciences › Soil Science › Composting and Vermicomposting Techniques
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Keywords
- compostability, bioplastic packaging, biopolymers, packaging waste, composting, polylactic acid, polyhydroxybutyrate, biodegradation, municipal solid waste, recycling, composting methods, green marketing, bio-based materials
- MeSH terms
- Biopolymers, Conservation of Natural Resources, Humans, Materials Testing, Plastics, Refuse Disposal, Societies, Soil, Molecular Structure, Product Packaging
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.