KCl‐induced corrosion of Ni‐based alloys containing 35–45 wt% Cr
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Ni–(35–45)Cr–4Nb alloys containing different fractions of α‐Cr were exposed to potassium chloride (KCl)‐induced corrosion. The corrosion exposures were carried out for 168 hr at 600°C in a 15% (vol/vol) H 2 O (g) + 5% (vol/vol) O 2 (g) + N 2 (g; balance) atmosphere using KCl‐free (reference) and predeposited KCl samples. To mimic the KCl deposition in real boilers, 24 hr exposures where KCl vapor condensed continuously onto samples were also performed. The corrosion attack of the studied materials increased significantly when KCl was present compared to the KCl‐free samples. For the KCl exposures, the corrosion attack drastically increased when a significant α‐Cr fraction was present. α‐Cr was either selectively attacked or dissolved through solid‐state diffusion and a layered build‐up of the outer external scale of K 2 CrO 4 and chromia could be observed. For the in situ condensed KCl exposure, severe corrosion was observed already within the 24 hr exposure, indicating a higher corrosion rate compared with when KCl was predeposited.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Grabke, H. J., Reese, E., & Spiegel, M. (1995) · Corrosion Science · doi:10.1016/0010-938x(95)00011-8 · Cited by 537
Asteman, H., Svensson, J.-E., Norell, M., & Johansson, L.-G. (2000) · Oxidation of Metals · doi:10.1023/a:1004642310974 · Cited by 325
KCl Induced Corrosion of a 304-type Austenitic Stainless Steel at 600°C; The Role of Potassium
Pettersson, J., Asteman, H., Svensson, J. E., & Johansson, L. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-005-5704-3 · Cited by 182
Halvarsson, M., Tang, J. E., Asteman, H., Svensson, J.-E., & Johansson, L.-G. (2006) · Corrosion Science · doi:10.1016/j.corsci.2005.08.012 · Cited by 146
Jonsson, T., Karlsson, S., Hooshyar, H., Sattari, M., Liske, J., Svensson, J.-E., & Johansson, L.-G. (2016) · Oxidation of Metals · doi:10.1007/s11085-016-9610-7 · Cited by 103
Self-citationFolkeson, N., Jonsson, T., Halvarsson, M., Johansson, L. ‐., & Svensson, J. ‐. (2011) · Materials and Corrosion · doi:10.1002/maco.201005942 · Cited by 93
Self-citationJonsson, T., Froitzheim, J., Pettersson, J., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M. (2009) · Oxidation of Metals · doi:10.1007/s11085-009-9156-z · Cited by 76
Self-citationLehmusto, J., Skrifvars, B.-J., Yrjas, P., & Hupa, M. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.12.016 · Cited by 68
Initial Stages of the HCl-Induced High-Temperature Corrosion of Alloy 310
Folkeson, N., Johansson, L.-G., & Svensson, J.-E. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2754174 · Cited by 66
KCl‐induced high temperature corrosion of selected commercial alloys: Part I: chromia‐formers
Kiamehr, S., Dahl, K. V., Montgomery, M., & Somers, M. A. J. (2015) · Materials and Corrosion · doi:10.1002/maco.201408213 · Cited by 42
Self-citation
Cited by
Phother-Simon, J., Hanif, I., Liske, J., & Jonsson, T. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109315 · Cited by 37
“However, no indication of this behavior (formation of carbides) was found in the present study [64].”
Self-citationContinuous KCl addition in high temperature exposures of 304 L – A way to mimic a boiler environment
Phother-Simon, J., Jonsson, T., & Liske, J. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108511 · Cited by 25
Self-citationSsenteza, V., Eklund, J., Hanif, I., Liske, J., & Jonsson, T. (2023) · Corrosion Science · doi:10.1016/j.corsci.2022.110896 · Cited by 25
Self-citationSsenteza, V., Eklund, J., Bigdeli, S., & Jonsson, T. (2024) · Corrosion Science · doi:10.1016/j.corsci.2023.111654 · Cited by 23
Self-citation
Metadata
- Authors
- Malede, Y. C., Simon, J. P., Jonsson, T., Montgomery, M., Dahl, K. V., & Hald, J.
- Venue
- Materials and Corrosion
- Publisher
- Wiley
- Published
- 2019-04-10
- Volume
- 70
- Issue
- 8
- Pages
- 1486-1506
- ISSN
- 0043-2822 (ISSN-L)
- 0947-5117
- 1521-4176
- OpenAlex
- W2937099706
- Cited by
- 8
- References
- 10
- FWCI
- 0.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.