On the chain stiffness of poly(lactide)s
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Poly(lactide)s (PLAs) are well known hydrolytically degradable polymers, that are widely used for biomedical applications. However, the intrinsic brittle nature of poly(lactide)s is still poorly understood. The stiffness of a polymer chain, expressed as the characteristic ratio C∞ plays an important role in the deformation mechanism of amorphous polymers. In order to investigate the effect of tacticity, high molecular weight poly(lactide) stereo‐copolymers with D‐lactide contents in the range 0–50 mol‐% were synthesised. These polymers were used in light scattering and differential scanning calorimetry (DSC) experiments for the determination of the characteristic ratio C∞ and glass transition temperature Tg. The results of the light scattering experiments in acetonitrile indicate that the characteristic ratio C∞ for poly(lactide)s depends on the L/D‐lactide ratio and increases with the tacticity of the polymer from 9.5 for racemic PDLLA to an estimated 11.8 for isotactic PLLA. These results are consistent with the observed brittle behaviour of poly(lactide) stereo‐copolymers and agree well with predictions obtained from group contribution methods. The choice of the relevant bond length used for the calculation of the characteristic ratio from the scattering data is not as obvious as it may seem and remains a point of discussion. The tacticity of poly(lactide)s also influences the glass transition temperature, which varies from 54°C for racemic to 63°C for isotactic poly‐(lactide).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Cited by
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
Ordered Nanoporous Polymers from Polystyrene−Polylactide Block Copolymers
Zalusky, A. S., Olayo-Valles, R., Wolf, J. H., & Hillmyer, M. A. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0278584 · Cited by 553
Liu, H., Song, W., Chen, F., Guo, L., & Zhang, J. (2011) · Macromolecules · doi:10.1021/ma1026934 · Cited by 317
Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends
López‐Rodríguez, N., López‐Arraiza, A., Meaurio, E., & Sarasua, J. R. (2006) · Polymer Engineering & Science · doi:10.1002/pen.20609 · Cited by 289
Enthalpy Relaxation and Embrittlement of Poly( l -lactide) during Physical Aging
Pan, P., Zhu, B., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071737c · Cited by 282
Melt rheology of variable L-content poly(lactic acid)
Dorgan, J. R., Janzen, J., Clayton, M. P., Hait, S. B., & Knauss, D. M. (2005) · Journal of Rheology · doi:10.1122/1.1896957 · Cited by 273
Melt rheology of poly(lactic acid): Entanglement and chain architecture effects
Dorgan, J. R., Williams, J. S., & Lewis, D. N. (1999) · Journal of Rheology · doi:10.1122/1.551041 · Cited by 272
Morphological behavior of model poly(ethylene‐alt‐propylene)‐b‐polylactide diblock copolymers
Schmidt, S. C., & Hillmyer, M. A. (2002) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10291 · Cited by 58
Ordered Nanoporous Poly(cyclohexylethylene)
Wolf, J. H., & Hillmyer, M. A. (2003) · Langmuir · doi:10.1021/la0341862 · Cited by 54
Metadata
- Authors
- Joziasse, C. A. P., Veenstra, H., Grijpma, D. W., & Pennings, A. J.
- Venue
- Macromolecular Chemistry and Physics
- Publisher
- Wiley
- Published
- 1996-07
- Volume
- 197
- Issue
- 7
- Pages
- 2219-2229
- ISSN
- 1022-1352 (ISSN-L)
- 1521-3935
- OpenAlex
- W2151522565
- Cited by
- 112
- References
- 1
- FWCI
- 1.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.