The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
Selective Localization of Nanofillers: Effect on Morphology and Crystallization of PLA/PCL Blends
Abstract
Adding nanofillers to PLA/PCL blends to change their surface and interface properties can improve their phase morphology. Here the selective localization of CNTs and organoclays as the third component in the blend is studied. It is found that clay is selectively localized in the PLA phase and at the phase interface whereas CNTs are mainly found in the PCL phase and at the phase interface. With a reduced viscosity ratio of the blend matrices, the CNTs change their preferred localization from PCL to PLA. The effects of the different selective localization of clay and CNTs on the morphologies are studied. In addition, the crystallization behavior of ternary systems also shows a strong dependence on the selective localization of nanofillers. magnified image
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Estimation of the surface free energy of polymers
Owens, D. K., & Wendt, R. C. (1969) · Journal of Applied Polymer Science · doi:10.1002/app.1969.070130815 · Cited by 9,476
Variation of peak temperature with heating rate in differential thermal analysis
Kissinger, H. E. (1956) · Journal of Research of the National Bureau of Standards · doi:10.6028/jres.057.026 · Cited by 3,924
Polymer Interface and Adhesion
Wu, S. (2017) · Routledge eBooks · doi:10.1201/9780203742860 · Cited by 3,379
Kinetics of non-isothermal crystallization
Ozawa, T. (1971) · Polymer · doi:10.1016/0032-3861(71)90041-3 · Cited by 2,373
Additive and nonadditive surface tension components and the interpretation of contact angles
Van Oss, C. J., Good, R. J., & Chaudhury, M. K. (1988) · Langmuir · doi:10.1021/la00082a018 · Cited by 1,415
Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black
Sumita, M., Sakata, K., Asai, S., Miyasaka, K., & Nakagawa, H. (1991) · Polymer Bulletin · doi:10.1007/bf00310802 · Cited by 1,080
Nonisothermal melt and cold crystallization kinetics of poly(aryl ether ether ketone ketone)
Liu, T., Mo, Z., Wang, S., & Zhang, H. (1997) · Polymer Engineering & Science · doi:10.1002/pen.11700 · Cited by 848
Fowkes, F. M. (1962) · The Journal of Physical Chemistry · doi:10.1021/j100808a524 · Cited by 806
Aliphatic polyesters. I. The degradation of poly(ϵ‐caprolactone) in vivo
Pitt, C. G., Chasalow, F. I., Hibionada, Y. M., Klimas, D. M., & Schindler, A. (1981) · Journal of Applied Polymer Science · doi:10.1002/app.1981.070261124 · Cited by 712
Uneven distribution of nanoparticles in immiscible fluids: Morphology development in polymer blends
Fenouillot, F., Cassagnau, P., & Majesté, J.-C. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.029 · Cited by 632
Cited by
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends
Taguet, A., Cassagnau, P., & Lopez-Cuesta, J.-M. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.002 · Cited by 572
Jalali Dil, E., Carreau, P. J., & Favis, B. D. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.012 · Cited by 158
Ahmed, J., Mulla, M., Jacob, H., Luciano, G., T.B., B., & Almusallam, A. (2019) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2019.100355 · Cited by 116
Metadata
- Authors
- Wu, D., Lin, D., Zhang, J., Zhou, W., Zhang, M., Zhang, Y., Wang, D., & Lin, B.
- Venue
- Macromolecular Chemistry and Physics
- Publisher
- Wiley
- Published
- 2011-01-21
- Volume
- 212
- Issue
- 6
- Pages
- 613-626
- ISSN
- 1022-1352 (ISSN-L)
- 1521-3935
- OpenAlex
- W2090273718
- Cited by
- 252
- References
- 74
- FWCI
- 12.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Selective Localization of Nanofillers: Effect on Morphology and Crystallization of PLA/PCL Blends. https://app.cochat.ai/papers/10.1002/macp.201000579
- The paper
- Wu, D., Lin, D., Zhang, J., Zhou, W., Zhang, M., Zhang, Y., Wang, D., & Lin, B. (2011). Selective Localization of Nanofillers: Effect on Morphology and Crystallization of PLA/PCL Blends. Macromolecular Chemistry and Physics. https://doi.org/10.1002/macp.201000579
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.