The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
Selective Localization of Nanofillers: Effect on Morphology and Crystallization of PLA/PCL Blends
Abstract
Adding nanofillers to PLA/PCL blends to change their surface and interface properties can improve their phase morphology. Here the selective localization of CNTs and organoclays as the third component in the blend is studied. It is found that clay is selectively localized in the PLA phase and at the phase interface whereas CNTs are mainly found in the PCL phase and at the phase interface. With a reduced viscosity ratio of the blend matrices, the CNTs change their preferred localization from PCL to PLA. The effects of the different selective localization of clay and CNTs on the morphologies are studied. In addition, the crystallization behavior of ternary systems also shows a strong dependence on the selective localization of nanofillers. magnified image
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Estimation of the surface free energy of polymers
Owens, D. K., & Wendt, R. C. (1969) · Journal of Applied Polymer Science · doi:10.1002/app.1969.070130815 · Cited by 9,476
Variation of peak temperature with heating rate in differential thermal analysis
Kissinger, H. E. (1956) · Journal of Research of the National Bureau of Standards · doi:10.6028/jres.057.026 · Cited by 3,924
Polymer Interface and Adhesion
Wu, S. (2017) · Routledge eBooks · doi:10.1201/9780203742860 · Cited by 3,379
Kinetics of non-isothermal crystallization
Ozawa, T. (1971) · Polymer · doi:10.1016/0032-3861(71)90041-3 · Cited by 2,373
Additive and nonadditive surface tension components and the interpretation of contact angles
Van Oss, C. J., Good, R. J., & Chaudhury, M. K. (1988) · Langmuir · doi:10.1021/la00082a018 · Cited by 1,415
Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black
Sumita, M., Sakata, K., Asai, S., Miyasaka, K., & Nakagawa, H. (1991) · Polymer Bulletin · doi:10.1007/bf00310802 · Cited by 1,080
Nonisothermal melt and cold crystallization kinetics of poly(aryl ether ether ketone ketone)
Liu, T., Mo, Z., Wang, S., & Zhang, H. (1997) · Polymer Engineering & Science · doi:10.1002/pen.11700 · Cited by 848
Fowkes, F. M. (1962) · The Journal of Physical Chemistry · doi:10.1021/j100808a524 · Cited by 806
Aliphatic polyesters. I. The degradation of poly(ϵ‐caprolactone) in vivo
Pitt, C. G., Chasalow, F. I., Hibionada, Y. M., Klimas, D. M., & Schindler, A. (1981) · Journal of Applied Polymer Science · doi:10.1002/app.1981.070261124 · Cited by 712
Uneven distribution of nanoparticles in immiscible fluids: Morphology development in polymer blends
Fenouillot, F., Cassagnau, P., & Majesté, J.-C. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.029 · Cited by 632
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607
Sinha Ray, S., Pouliot, S., Bousmina, M., & Utracki, L. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.009 · Cited by 436
Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite
Nam, J. Y., Sinha Ray, S., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma034623j · Cited by 429
General crystallization behaviour of poly(l-lactic acid)
Kalb, B., & Pennings, A. J. (1980) · Polymer · doi:10.1016/0032-3861(80)90315-8 · Cited by 421
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Selective Localization of Multiwalled Carbon Nanotubes in Poly(ε-caprolactone)/Polylactide Blend
Wu, D., Zhang, Y., Zhang, M., & Yu, W. (2009) · Biomacromolecules · doi:10.1021/bm801183f · Cited by 372
Self-citationKhatua, B. B., Lee, D. J., Kim, H. Y., & Kim, J. K. (2004) · Macromolecules · doi:10.1021/ma0352072 · Cited by 365
Göldel, A., Kasaliwal, G. R., & Pötschke, P. (2008) · Macromolecular Rapid Communications · doi:10.1002/marc.200800549 · Cited by 337
Direct measurement of multiwall nanotube surface tension
Nuriel, S., Liu, L., Barber, A. H., & Wagner, H. D. (2005) · Chemical Physics Letters · doi:10.1016/j.cplett.2005.01.072 · Cited by 326
Dell'Erba, R., Groeninckx, G., Maglio, G., Malinconico, M., & Migliozzi, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00269-5 · Cited by 318
Compatibilization of Immiscible Poly(propylene)/Polystyrene Blends Using Clay
Wang, Y., Zhang, Q., & Fu, Q. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200390026 · Cited by 299
Binary and ternary blends of polylactide, polycaprolactone and thermoplastic starch
Sarazin, P., Li, G., Orts, W. J., & Favis, B. D. (2008) · Polymer · doi:10.1016/j.polymer.2007.11.029 · Cited by 298
Chow, W. S., Mohd Ishak, Z. A., Karger-Kocsis, J., Apostolov, A. A., & Ishiaku, U. S. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.006 · Cited by 291
Zhang, J., Tsuji, H., Noda, I., & Ozaki, Y. (2004) · Macromolecules · doi:10.1021/ma049288t · Cited by 288
Self-citationSelective Enzymatic Degradations of Poly(l-lactide) and Poly(ε-caprolactone) Blend Films
Liu, L., Li, S., Garreau, H., & Vert, M. (2000) · Biomacromolecules · doi:10.1021/bm000046k · Cited by 272
Wu, D., Wu, L., Zhang, M., & Zhao, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.05.001 · Cited by 256
Self-citationSolvent-Induced Crystallization of Syndiotactic Polystyrene: Thermodynamics and Morphology
Ray, B., Elhasri, S., Thierry, A., Marie, P., & Guenet, J.-M. (2002) · Macromolecules · doi:10.1021/ma0210731 · Cited by 241
Isothermal crystallization and chain mobility of poly(L-lactide)
Iannace, S., & Nicolais, L. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970502)64:5<911::aid-app11>3.0.co;2-w · Cited by 240
Li, Y., & Shimizu, H. (2008) · Macromolecules · doi:10.1021/ma8006834 · Cited by 228
Na, Y.-H., He, Y., Shuai, X., Kikkawa, Y., Doi, Y., & Inoue, Y. (2002) · Biomacromolecules · doi:10.1021/bm020050r · Cited by 219
Enzymatic degradation of poly(ε-caprolactone)/poly(dl-lactide) blends in phosphate buffer solution
Gan, Z., Yu, D., Zhong, Z., Liang, Q., & Jing, X. (1999) · Polymer · doi:10.1016/s0032-3861(98)00549-7 · Cited by 217
Phase behavior and its viscoelastic response of polylactide/poly(ε-caprolactone) blend
Wu, D., Zhang, Y., Zhang, M., & Zhou, W. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.04.023 · Cited by 213
Self-citationSarazin, P., Roy, X., & Favis, B. D. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.065 · Cited by 210
Novel morphologies of poly(phenylene oxide) (PPO)/polyamide 6 (PA6) blend nanocomposites
Li, Y., & Shimizu, H. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.018 · Cited by 210
Nonisothermal cold crystallization behavior and kinetics of polylactide/clay nanocomposites
Wu, D., Wu, L., Wu, L., Xu, B., Zhang, Y., & Zhang, M. (2007) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21154 · Cited by 202
Self-citationThe Role of the Blend Interface Type on Morphology in Cocontinuous Polymer Blends
Li, J., Ma, P. L., & Favis, B. D. (2002) · Macromolecules · doi:10.1021/ma010104+ · Cited by 189
Morphological and Kinetic Analyses of Regime Transition for Poly[(S)-lactide] Crystal Growth
Abe, H., Kikkawa, Y., Inoue, Y., & Doi, Y. (2001) · Biomacromolecules · doi:10.1021/bm015543v · Cited by 179
A Novel Strategy to Incorporate Carbon Nanotubes into Thermoplastic Matrices
Pötschke, P., Pegel, S., Claes, M., & Bonduel, D. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200700637 · Cited by 175
Deformation and damage upon stretching of degradable polymers (PLA and PCL)
Rezgui, F., Swistek, M., Hiver, J. M., G'Sell, C., & Sadoun, T. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.116 · Cited by 171
Wu, D., Wu, L., Sun, Y., & Zhang, M. (2007) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21309 · Cited by 169
Self-citationInterfacial tension reduction in PBT/PE/clay nanocomposite
Hong, J. S., Kim, Y. K., Ahn, K. H., Lee, S. J., & Kim, C. (2007) · Rheologica Acta · doi:10.1007/s00397-006-0123-1 · Cited by 167
Sinha Ray, S., & Bousmina, M. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200500447 · Cited by 162
Maio, E. D., Iannace, S., Sorrentino, L., & Nicolais, L. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.037 · Cited by 155
Co‐continuous Polyamide 6 (PA6)/Acrylonitrile‐Butadiene‐Styrene (ABS) Nanocomposites
Li, Y., & Shimizu, H. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200400654 · Cited by 154
Tsuji, H., Kawashima, Y., Takikawa, H., & Tanaka, S. (2007) · Polymer · doi:10.1016/j.polymer.2007.05.040 · Cited by 154
Calculation of solid surface tensions
Dalal, E. N. (1987) · Langmuir · doi:10.1021/la00078a023 · Cited by 154
Zhao, Y., Qiu, Z., & Yang, W. (2008) · The Journal of Physical Chemistry B · doi:10.1021/jp805230e · Cited by 143
Laredo, E., Grimau, M., Bello, A., Wu, D., Zhang, Y., & Lin, D. P. (2010) · Biomacromolecules · doi:10.1021/bm100135n · Cited by 120
Self-citationHomminga, D., Goderis, B., Dolbnya, I. P., & Groeninckx, G. (2006) · Polymer · doi:10.1016/j.polymer.2005.12.080 · Cited by 118
Crystallization behavior of poly(ε‐caprolactone)/multiwalled carbon nanotube composites
Wu, T., & Chen, E.-C. (2005) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20722 · Cited by 118
Influence of Layered Silicates on the Phase-Separated Morphology of PS−PVME Blends
Yurekli, K., Karim, A., Amis, E. J., & Krishnamoorti, R. (2003) · Macromolecules · doi:10.1021/ma020755l · Cited by 117
Bose, S., Bhattacharyya, A. R., Bondre, A. P., et al. (2008) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21501 · Cited by 114
Eastmond, G. C. (1999) · Advances in polymer science · doi:10.1007/3-540-48838-3_2 · Cited by 112
Compatibilized poly(-caprolactone)/poly(L-lactide) blends for biomedical uses
Maglio, G., Migliozzi, A., Palumbo, R., Immirzi, B., & Volpe, M. G. (1999) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(19990401)20:4<236::aid-marc236>3.0.co;2-v · Cited by 112
Influence of multiwall carbon nanotubes on morphology and electrical conductivity of PP/ABS blends
Khare, R. A., Bhattacharyya, A. R., Kulkarni, A. R., Saroop, M., & Biswas, A. (2008) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21560 · Cited by 111
Viscoelastic interfacial properties of compatibilized poly(ε‐caprolactone)/polylactide blend
Wu, D., Zhang, Y., Yuan, L., Zhang, M., & Zhou, W. (2010) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21952 · Cited by 111
Self-citationUse of carbon nanotube filled polycarbonate in blends with montmorillonite filled polypropylene
Pötschke, P., Kretzschmar, B., & Janke, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.02.034 · Cited by 109
Li, S., Liu, L., Garreau, H., & Vert, M. (2003) · Biomacromolecules · doi:10.1021/bm025748j · Cited by 108
Co-continuous morphology development in partially miscible PMMA/PC blends
Marin, N., & Favis, B. D. (2002) · Polymer · doi:10.1016/s0032-3861(02)00280-x · Cited by 103
Shieh, Y.-T., & Liu, G. L. (2007) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21184 · Cited by 103
Crystallization and biodegradation of polylactide/carbon nanotube composites
Wu, D., Wu, L., Zhou, W., Zhang, M., & Yang, T. (2010) · Polymer Engineering and Science · doi:10.1002/pen.21695 · Cited by 97
Self-citationSurface characterization of poly(lactic acid) and polycaprolactone by inverse gas chromatography
Cava, D., Gavara, R., Lagaron, J. M., & Voelkel, A. (2007) · Journal of Chromatography A · doi:10.1016/j.chroma.2007.02.110 · Cited by 90
Filippone, G., Dintcheva, N. T., Mantia, F. P. L., & Acierno, D. (2010) · Polymer · doi:10.1016/j.polymer.2010.06.044 · Cited by 87
Phase Behavior of PS−PVME Nanocomposites
Yurekli, K., Karim, A., Amis, E. J., & Krishnamoorti, R. (2003) · Macromolecules · doi:10.1021/ma0302098 · Cited by 77
Tsuji, H., & Ishizaka, T. (2001) · Macromolecular Bioscience · Cited by 77
Surface Energy of Modified Nanoclays and Its Effect on Polymer/Clay Nanocomposites
Kamal, M. R., Uribe-Calderon, J. A., & Lennox, B. R. (2009) · Journal of Adhesion Science and Technology · doi:10.1163/156856108x379164 · Cited by 62
Wu, T., & Chen, E.-C. (2006) · Polymer Engineering and Science · doi:10.1002/pen.20620 · Cited by 58
Clay locked phase morphology in the PPS/PA66/clay blends during compounding in an internal mixer
Zou, H., Zhang, Q., Tan, H. S., Wang, K., Du, R., & Fu, Q. (2005) · Polymer · doi:10.1016/j.polymer.2005.11.031 · Cited by 54
Katada, A., Buys, Y. F., Tominaga, Y., Asai, S., & Sumita, M. (2005) · Colloid & Polymer Science · doi:10.1007/s00396-005-1348-8 · Cited by 54
Wu, D., Wu, L., Zhang, M., Zhou, W., & Zhang, Y. (2008) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21461 · Cited by 47
Self-citationRoy, X., Sarazin, P., & Favis, B. D. (2006) · Advanced Materials · doi:10.1002/adma.200501210 · Cited by 47
Comparison Between Isothermal Cold and Melt Crystallization of Polylactide/Clay Nanocomposites
Wu, D., Wu, L., Wu, L., Xu, B., Zhang, Y., & Zhang, M. (2008) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2008.18229 · Cited by 33
Self-citationEffect of steady shear on the morphology of biodegradable poly(ϵ‐caprolactone)/polylactide blend
Zhang, Y., Wu, D., Zhang, M., Zhou, W., & Xu, C. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21456 · Cited by 33
Self-citationSchmidt (2001) · doi:10.1002/1099-0488(20010201)39:3<300::aid-polb1002>3.0.co;2-m
Cited by
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends
Taguet, A., Cassagnau, P., & Lopez-Cuesta, J.-M. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.002 · Cited by 572
Jalali Dil, E., Carreau, P. J., & Favis, B. D. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.012 · Cited by 158
Ahmed, J., Mulla, M., Jacob, H., Luciano, G., T.B., B., & Almusallam, A. (2019) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2019.100355 · Cited by 116
Metadata
- Authors
- Wu, D., Lin, D., Zhang, J., Zhou, W., Zhang, M., Zhang, Y., Wang, D., & Lin, B.
- Venue
- Macromolecular Chemistry and Physics
- Publisher
- Wiley
- Published
- 2011-01-21
- Volume
- 212
- Issue
- 6
- Pages
- 613-626
- ISSN
- 1022-1352 (ISSN-L)
- 1521-3935
- OpenAlex
- W2090273718
- Cited by
- 252
- References
- 74
- FWCI
- 12.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.