The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Abstract
A series of blends of the biodegradable polymers poly(D,L-lactic acid) and poly( epsilon -caprolactone) were prepared by varying mass fraction across the range of compositions. Tensile testing was performed at room temperature using an extensometer and the elastic modulus was calculated for each blend. The blends were also tested to failure, and the strain-at-failure and yield stress recorded. While the blend has been shown to have a lower critical solution temperature, the mechanical properties were insensitive to the annealing conditions. Scanning electron microscopy was used to characterize the blend microstructure and poor adhesion was observed at the interface between blend components. Differential scanning calorimetry was performed but the results were somewhat variable, indicating this blend may have complex phase behavior that depends sensitively on the method of preparation. However, nuclear magnetic resonance data indicate the two components are phase separated. A percolation model is used to explain the observed mechanical data and the results are consistent with the predictions of the Kerner-Uemura-Takayangi model. The results of these experiments demonstrate the utility of polymer blending in tuning material properties.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
The Principles of Nuclear Magnetism
Abragam, A., & Hebel, L. C. (1961) · American Journal of Physics · doi:10.1119/1.1937646 · Cited by 15,792
Formation of Glasses from Liquids and Biopolymers
Angell, C. A. (1995) · Science · doi:10.1126/science.267.5206.1924 · Cited by 4,799 · cited 1×
“The DSC traces from blended samples gave somewhat varied results, which might be attributed to the sensitivity of glass-forming liquids to the method of preparation [16].”
BackgroundMechanical Properties of Solid Polymers: Third Edition
Ward, I. M., & Sweeney, J. (2012) · Wiley eBooks · doi:10.1002/9781119967125 · Cited by 2,084
The Elastic and Thermo-elastic Properties of Composite Media
Kerner, E. H. (1956) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/69/8/305 · Cited by 1,786 · cited 2×
“The trends in the Young’s modulus were fit using the Kerner–Uemura–Takayanagi model [11,12], which treats the blend as spherical inclusions of polymer 2 having Young’s modulus E2 in a continuous matrix of polymer 1 having Young’s modulus E1 and Poisson’s ratio n1; taken to be 0.”
MethodPhase structure and adhesion in polymer blends: A criterion for rubber toughening
Wu, S. (1985) · Polymer · doi:10.1016/0032-3861(85)90015-1 · Cited by 1,426 · cited 1×
“Also, the size of inclusions relative to the mean distance between them can strongly influence blend mechanical properties, even at constant interfacial adhesion [15].”
BackgroundChemInform Abstract: Multidimensional Solid‐State NMR of Polymers
SPIESS, H. W. (1996) · ChemInform · doi:10.1002/chin.199636330 · Cited by 1,296
Nuclear Magnetic Resonance Spectra from a Crystal rotated at High Speed
ANDREW, E. R., BRADBURY, A., & EADES, R. G. (1958) · Nature · doi:10.1038/1821659a0 · Cited by 1,255 · cited 1×
“Chemical shift effects survive and are reduced to isotropic shifts via MAS [24].”
BackgroundApproach to High-Resolution nmr in Solids
Waugh, J. S., Huber, L. M., & Haeberlen, U. (1968) · Physical Review Letters · doi:10.1103/physrevlett.20.180 · Cited by 880
Engelberg, I., & Kohn, J. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90037-b · Cited by 803 · cited 2×
“The melting temperature of PCL is estimated to be 62 C and the glass transition temperature of PLA is 53 C, both consistent with literature values [1].”
BackgroundResultPaul, D. R., & Barlow, J. W. (1980) · Journal of Macromolecular Science, Part C · doi:10.1080/00222358008080917 · Cited by 675 · cited 1×
“The composition of the percolation threshold is a function of the blend interfacial tension as well as the viscoelastic properties of the polymers [5,6].”
Background
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174
Polylactic acid: Synthesis and biomedical applications
Singhvi, M. S., Zinjarde, S. S., & Gokhale, D. V. (2019) · Journal of Applied Microbiology · doi:10.1111/jam.14290 · Cited by 883
“Broz et al. (2003) prepared a series of blends of the biodegradable polymers poly(D,L-LA) and poly(e-caprolactone) by Journal of Applied Microbiology 127, 1612--1626 © 2019 The Society for Applied Microbiology 1615 varying mass fraction across the range of compositions.”
A review on biodegradable polymeric materials for bone tissue engineering applications
Sabir, M. I., Xu, X., & Li, L. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3770-7 · Cited by 645
Metadata
- Authors
- Broz, M.
- Affiliations
- National Institute of Standards and Technology (US)
- Corresponding author
- Broz, M
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2003-10
- Volume
- 24
- Issue
- 23
- Pages
- 4181-4190
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W1494689048
- Cited by
- 388
- References
- 27
- Citations by year
- 2026: 5 · 2025: 13 · 2024: 12 · 2023: 5 · 2022: 21 · 2021: 20 · 2020: 21 · 2019: 28 · 2018: 22 · 2017: 27 · 2016: 23 · 2015: 31 · 2014: 25 · 2013: 23 · 2012: 23
- FWCI
- 4.85
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Biomaterials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Keywords
- poly(D,L-lactide), polycaprolactone, polymer blends, biodegradable polymers, mechanical properties, tensile properties, phase separation, blend microstructure, interfacial adhesion, critical solution temperature, annealing, percolation model, elastic modulus, yield stress, failure strain
- MeSH terms
- Tissue Adhesions, Biocompatible Materials, Calorimetry, Differential Scanning, Microscopy, Electron, Microscopy, Electron, Scanning, Magnetic Resonance Spectroscopy, Polyesters, Polymers, Stress, Mechanical, Temperature, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends. https://app.cochat.ai/papers/10.1016/s0142-9612(03)00314-4
- The paper
- Broz, M. (2003). Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends. Biomaterials. https://doi.org/10.1016/s0142-9612(03)00314-4
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.