CoChat

Shape‐Memory Effect in Polymers

Open access
Lendlein, Andreas, Sauter, Tilman · 2013 · Macromolecular Chemistry and Physics
Cited by 39

The DOI matches its Crossref record.

Abstract

In recent years substantial progress has been achieved in the synthesis1 and characterization2 of shape-memory polymers (SMPs). SMPs can be programmed by a temporary fixation of a deformation, which is recovered once a suitable stimulus is applied. In most cases, the stimulus is heat, but other stimuli, such as electric current, humidity, light or alternating magnetic fields, for inducing the shape-memory effect in polymers, have been realized. Important achievements are remotely controlled actuation and the realization of more-complex movements on demand. This special issue highlights the shape-memory effect in polymers. One major request for SMPs is a broader variety of possible stimuli to adjust the shape change towards specific applications. Light as possible additional stimulus has been addressed by White et al., who explored azobenzene-functionalized polyimide materials, which are capable of a shape-change effect due to a photochemical mechanism referred to as trans-cis-trans reorientation.3 Pre-straining leads to the alignment of both the imide units as well as the azobenzene chromophores. The magnitude of the photogenerated stress can be doubled by pre-straining the material. Xie et al. explored high-intensity focused ultrasound to trigger a shape change in a thermosensitive polymer indirectly.4 A polyurethane containing PCL as a switching segment was loaded with copper sulfate as model compound. Exposure to the focused ultrasound induced a shape recovery and changed the diffusibility of the model compound in the SMP matrix. The softening of glassy switching domains by uptake of water has been examined in SMP foams by Wilson et al.5 Decreasing the glass transition temperature (Tg) of the switching domains to a temperature lower than the environmental temperature induced the shape-memory effect. By adjusting the hydrophobicity of the SMP, the time of shape recovery in water can be controlled from 2 min to more than 24 h. The depressed Tg was increased from 12 to 40 °C by increasing the hydrophobicity of the diisocyanate monomer. A direct sensing capability has been explored by Schroeter et al. using redox-sensitive poly(p-phenylene ethynylene)s (rsPPEs) that can be reduced and oxidized in solution as well as in the solid state, accompanied by a change of photoluminescence values.6 rsPPEs with good thermal stability (up to 250 °C) and solubility in common organic solvents were achieved, while switching of the optical properties was possible by oxidation and reduction with different reagents. Furthermore, a change in conductivity caused by the redox reaction might enable, for example, electrical heating to be controlled using rsPPEs. Despite the great potential of novel stimuli, a strong interest in SMP research still lies in the improvement of thermosensitive dual-shape polymers like the enhancement of their structural shape-memory properties,7 as well as the exact placement of their switching temperature within a desired temperature range.8 In their work, Jana and Erden describe special blends of thermoplastic polyurethanes with polybenzoxazine (PB), where PB serves as a second set of netpoints supporting a permanent shape, as an alternative to the use of inorganic nanofillers.7 Such compounds were prepared in a three-step synthesis, where, at first, the benzoxazine monomer was dissolved in the urethane prepolymer; next, the prepolymer was chain-extended with 1,4-butanediol; and, finally, the benzoxazine was polymerized into PB by thermal curing within the polyurethane matrix. As compared with inorganic nanofillers, PB can be directly coupled by copolymerization or grafting reactions, in addition to simply blending both polymers, while PB represents an additional hard phase due to the high Tg of the related domains, and therefore causes a much greater storage modulus. The results showed a strong increase in the Young's modulus and the ultimate stress at ambient temperature. Furthermore, the shape-memory properties of the blends were substantially improved with respect to the shape fixity and shape recovery, as well as the recovery stress, compared with pure polyurethane. Interestingly, even though strong changes in the mechanical properties were achieved, the maximum amount of PB was only 17 wt%. In another approach, which was followed by Dong and Weiss, the creation of blends from fatty acids and elastomeric ionomers not only resulted in high shape fixation and shape-recovery ratios of almost 100%, but the switching temperature could also be accurately adjusted within a desired temperature range from 20 to 120 °C.8 However, the SMP system showed, so far, significant time-dependent relaxation both in the temporary and the permanent shape, which is thought to origin from creep. To address this question the authors identified the ionic network to be the weak link in the stability of the shape and that by covalent crosslinking of the ionomer, the problem of creep could be resolved. Different-shaped bodi

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/macp.201300098

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 39

Metadata

Authors
Lendlein, A., & Sauter, T.
Venue
Macromolecular Chemistry and Physics
Publisher
Wiley
Published
2013-06-03
Volume
214
Issue
11
Pages
1175-1177
ISSN
  • 1022-1352 (ISSN-L)
  • 1521-3935
OpenAlex
W1976081677
Cited by
39
References
0
FWCI
7.09
Type
journal article
Language
en
Open access
bronze

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Shape‐Memory Effect in Polymers. https://app.cochat.ai/papers/10.1002/macp.201300098
The paper
Lendlein, A., & Sauter, T. (2013). Shape‐Memory Effect in Polymers. Macromolecular Chemistry and Physics. https://doi.org/10.1002/macp.201300098

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.