Mechanical and Thermal Properties of Poly(L‐lactide) Incorporating Various Inorganic Fillers with Particle and Whisker Shapes
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Poly(L‐lactide) (PLLA) composites incorporating various inorganic fillers (ifR‐PLA) were prepared by the melt blending technique, and their mechanical and thermal properties were evaluated. The filler types influenced the mechanical properties of ifR‐PLA; for those incorporating particle‐ and whisker‐type fillers the tensile moduli were 3.1–3.7 and 3.7–4.5 GPa, respectively, and the flexural moduli were 4.1–4.8 and 4.8–6.1 GPa. It was found that the tensile strength and modulus, as well as the flexural modulus, of ifR‐PLA incorporating whisker‐type fillers increased in proportion to the volume percent of the fillers (Vf). The flexural strength of ifR‐PLA incorporating 9Al 2 O 3 · 2B 2 O 3 whiskers showed a similar increase, while that of ifR‐PLA incorporating CaCO 3 whiskers showed a decrease with increasing Vf. This difference may be because the 9Al 2 O 3 · 2B 2 O 3 with its large aspect ratio kept its original fibrous shape, while the CaCO 3 lost its fibrous shape during the blending process. However, the reinforcing effect of these fillers was relatively low compared with that known for the corresponding composites of the conventional polymeric materials, probably because of the poor surface adhesion of PLLA to the fillers. Comparison of effect on storage moduli of different fillers. magnified imageComparison of effect on storage moduli of different fillers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dell'Erba, R., Groeninckx, G., Maglio, G., Malinconico, M., & Migliozzi, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00269-5 · Cited by 318
Cited by
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Thermal and mechanical properties of chemical crosslinked polylactide (PLA)
Yang, S.-L., Wu, Z.-H., Yang, W., & Yang, M.-B. (2008) · Polymer Testing · doi:10.1016/j.polymertesting.2008.08.009 · Cited by 412
Isothermal cold crystallization kinetics of polylactide/nucleating agents
Liao, R., Yang, B., Yu, W., & Zhou, C. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25733 · Cited by 199
Morphology and Properties of Soy Protein and Polylactide Blends
Zhang, J., Jiang, L., Zhu, L., Jane, J.-L., & Mungara, P. (2006) · Biomacromolecules · doi:10.1021/bm050888p · Cited by 176
Metadata
- Authors
- Urayama, H., Ma, C., & Kimura, Y.
- Venue
- Macromolecular Materials and Engineering
- Publisher
- Wiley
- Published
- 2003-06-30
- Volume
- 288
- Issue
- 7
- Pages
- 562-568
- ISSN
- 1438-7492 (ISSN-L)
- 1439-2054
- OpenAlex
- W2041653575
- Cited by
- 65
- References
- 1
- FWCI
- 0.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.