The DOI matches its Crossref record.
Chemical Recycling of Polystyrene by Pyrolysis: Potential Use of the Liquid Product for the Reproduction of Polymer
Abstract
The potential use of the liquid product obtained from the pyrolysis of polystyrene as a raw material for the reproduction of the polymer was investigated in this study. Catalytic and non‐catalytic pyrolysis experiments were carried out in a fixed bed reactor using either model polymer or commercial waste products as the feedstock. The liquid fraction produced from all the pyrolysis experiments consisted mainly of the styrene monomer and this was subjected to re‐polymerization without any further purification, in a DSC with AIBN initiator. It was found that the pyrolysis oil fraction could be re‐polymerized to again produce polymer. However, aromatic compounds included in this fraction may act as chain transfer agents, resulting in alterations in the shape of the reaction rate curve and lowering significantly the average molecular weight and the Tg of the polymer produced. magnified image
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent advances in the gasification of waste plastics. A critical overview
Lopez, G., Artetxe, M., Amutio, M., Alvarez, J., Bilbao, J., & Olazar, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.032 · Cited by 852
Dogu, O., Pelucchi, M., Van de Vijver, R., Van Steenberge, P. H. M., D'hooge, D. R., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Van Geem, K. M. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100901 · Cited by 698
Approaches to Sustainable and Continually Recyclable Cross-Linked Polymers
Fortman, D. J., Brutman, J. P., De Hoe, G. X., Snyder, R. L., Dichtel, W. R., & Hillmyer, M. A. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02355 · Cited by 559
Recycling of waste from polymer materials: An overview of the recent works
Hamad, K., Kaseem, M., & Deri, F. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.09.025 · Cited by 537
Potential of pyrolysis processes in the waste management sector
Czajczyńska, D., Anguilano, L., Ghazal, H., Krzyżyńska, R., Reynolds, A. J., Spencer, N., & Jouhara, H. (2017) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2017.06.003 · Cited by 531
Catalytic methods for chemical recycling or upcycling of commercial polymers
Kosloski-Oh, S. C., Wood, Z. A., Manjarrez, Y., de los Rios, J. P., & Fieser, M. E. (2021) · Materials Horizons · doi:10.1039/d0mh01286f · Cited by 369
Huang, Z., Shanmugam, M., Liu, Z., Brookfield, A., Bennett, E. L., Guan, R., Vega Herrera, D. E., Lopez-Sanchez, J. A., Slater, A. G., McInnes, E. J. L., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c01410 · Cited by 365
Upcycling waste plastics into carbon nanomaterials: A review
Zhuo, C., & Levendis, Y. A. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.39931 · Cited by 327
A review on gasification and pyrolysis of waste plastics
Shah, H. H., Amin, M., Iqbal, A., Nadeem, I., Kalin, M., Soomar, A. M., & Galal, A. M. (2023) · Frontiers in Chemistry · doi:10.3389/fchem.2022.960894 · Cited by 269
Joseph, B., James, J., Kalarikkal, N., & Thomas, S. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.06.003 · Cited by 195
Roy, P. S., Garnier, G., Allais, F., & Saito, K. (2021) · ChemSusChem · doi:10.1002/cssc.202100904 · Cited by 176
Metadata
- Authors
- Achilias, D. S., Kanellopoulou, I., Megalokonomos, P., Antonakou, E., & Lappas, A. A.
- Venue
- Macromolecular Materials and Engineering
- Publisher
- Wiley
- Published
- 2007-08-06
- Volume
- 292
- Issue
- 8
- Pages
- 923-934
- ISSN
- 1438-7492 (ISSN-L)
- 1439-2054
- OpenAlex
- W1971411566
- Cited by
- 164
- References
- 0
- FWCI
- 1.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.