Biodegradable polylactide and its nanocomposites: Opening a new dimension for plastics and composites

Ray, Suprakas Sinha, Okamoto, Masami·2003·Macromolecular Rapid Communications
DOI 10.1002/marc.200300008

Cited by (453)

Items 201–300 of 453

  1. Characteristics and Applications of Poly(lactide)
    Sandra Domenek, Cécile Courgneau, Violette Ducruet · 2011 · Biopolymers
  2. Biodegradable and Renewable Antennas for Green IoT Sensors: A Review
    Amir Zahedi, Ranjith Liyanapathirana, Karthick Thiyagarajan · 2024 · IEEE Access
  3. Impact of Pre‐Processing of Montmorillonite on the Properties of Melt‐Extruded Thermoplastic Starch/ Montmorillonite Nanocomposites
    Xuechen Wang, Xingxiang Zhang, Haihui Liu, Ning Wang · 2009 · Starch - Stärke
  4. Poly( L ‐lactide)/Poly( D ‐lactide)/clay nanocomposites: Enhanced dispersion, crystallization, mechanical properties, and hydrolytic degradation
    Yi Li, Changyu Han, Xin Zhang, Kun Xu, Junjia Bian, Lisong Dong · 2013 · Polymer Engineering and Science
  5. Abiotic degradation of poly(dl-lactide), poly(ɛ-caprolactone) and their blends
    Kikku Fukushima, J. L. Feijoo, Ming‐Chien Yang · 2012 · Polymer Degradation and Stability
  6. Bioplastics Based Nanocomposites for Packaging Applications
    J. Soulestin, Kalappa Prashantha, Marie‐France Lacrampe, Patricia Krawczak · 2011
  7. Structure, morphology and thermal stability of synthetic fluorine mica and its organic derivatives
    Diego H. S. Souza, Karim Dahmouche, Cristina Tristão Andrade, Marcos Lopes Dias · 2011 · Applied Clay Science
  8. Starch‐Based Bionanocomposites: Processing and Properties
    P. M. Visakh, Aji P. Mathew, Kristiina Oksman, Sabu Thomas · 2012 · Wiley eBooks
  9. Eco-friendly zinc-metal-organic framework as a nucleating agent for poly (lactic acid)
    Safaa H. El‐Taweel, Safaa S. Hassan, Khaled M. Ismail · 2024 · International Journal of Biological Macromolecules
  10. Electro-textile based wearable patch antenna on biodegradable poly lactic acid (PLA) plastic substrate for 2.45 GHz, ISM band applications
    Haroon, Sadiq Ullah, James A. Flint · 2014 · International Conference on Emerging Technologies
  11. Design and preparation of poly(lactic acid) hydroxyapatite nanocomposites reinforced with phosphorus‐based organic additive: Thermal, combustion, and mechanical properties studies
    Mohsen Hajibeygi, Saeid Shafiei‐Navid · 2019 · Polymers for Advanced Technologies
  12. Preparation and characterization of novel hybrid of chitosan‐g‐PDMS and sodium montmorrilonite
    Dilip Depan, Bijandra Kumar, Raj Pal Singh · 2007 · Journal of Biomedical Materials Research Part B Applied Biomaterials
  13. Bionanocomposites
    Eduardo Ruiz‐Hitzky, Pîlar Aranda, Margarita Darder · 2008 · Kirk-Othmer Encyclopedia of Chemical Technology
  14. Effect of Organic Modifier and Clay Content on Non-Isothermal Cold Crystallization and Melting Behavior of Polylactide/Organovermiculite Nanocomposites
    María Jesús Fernández, M. Dolores Fernández · 2020 · Polymers
  15. Effect of Nanoclay Addition on the Hygrothermal Durability of Glass/Epoxy and Fiber Metal Laminates
    Moslem Najafi, Abolfazl Darvizeh, Reza Ansari · 2018 · Fibers and Polymers
  16. Biorenewable nanocomposites
    Luc Avérous, Éric Pollet · 2011 · MRS Bulletin
  17. Influence of sepiolite and electron beam irradiation on the structural and physicochemical properties of polyethylene/starch nanocomposites
    Tariq Yasin, Muhammad Nisar, Muhammad Shafiq, Young‐Chang Nho, Rashid M Ahmad · 2013 · Polymer Composites
  18. Thermoplastic nanobiocomposites for rigid and flexible food packaging applications
    Jose Maria Lagaron, M. Sanchez-Garcia, Enrique Giménez · 2008 · Elsevier eBooks
  19. Organically modified layered zinc phenylphosphonate reinforced stereocomplex-type poly(lactic acid) nanocomposites with highly enhanced mechanical properties and degradability
    Yi‐An Chen, Erh-Chiang Chen, Tzong‐Ming Wu · 2015 · Journal of Materials Science
  20. Effect of biodegradable poly(ethylene adipate) with low molecular weight as an efficient plasticizer on the significantly enhanced crystallization rate and mechanical properties of poly( l -lactide)
    Zhaobin Qiu, Pin Zhou · 2014 · RSC Advances
  21. Parallel factor (PARAFAC) kernel analysis of temperature- and composition-dependent NMR spectra of poly(lactic acid) nanocomposites
    Hideyuki Shinzawa, Masakazu Nishida, Wataru Kanematsu, Toshiyuki Tanaka, Kenzi Suzuki, Isao Noda · 2012 · The Analyst
  22. Thermal, Mechanical, and Rheological Characterization of Polylactic Acid/Halloysite Nanotube Nanocomposites
    Yu Hyun Kim, Seung Hyuk Kwon, Hyoung Jin Choi, Kisuk Choi, Nhol Kao, Sati N. Bhattacharya, Rahul Kumar Gupta · 2016 · Journal of Macromolecular Science Part B
  23. High-efficient crystallization promotion and melt reinforcement effect of diblock PDLA-b-PLLA copolymer on PLLA
    Yan, Cong, Jiang, Yuan-Ping, Hou, De-Fa, Yang, Wei, Yang, Ming-Bo · 2020 · Polymer
  24. Study of Flame Retardant and Mechanical Properties of Coconut Shell Particles Filled Composite
    Akarsh Verma, Singh VK, Md Arif · 2016 · Research & Reviews Journal of Material Sciences
  25. Production and in vitro analysis of catechin incorporated electrospun gelatin/ poly (lactic acid) microfibers for wound dressing applications
    Marziyeh Ranjbar‐Mohammadi, Mohammad Nouri · 2021 · Journal of Industrial Textiles
  26. Intercalation of montmorillonite with dialkylammonium cationic surfactants
    Madhuchhanda Sarkar, Kausik Dana · 2022 · Journal of Molecular Structure
  27. Effects of PDLA molecular weight on the crystallization behaviors and rheological properties of asymmetric PDLA/PLLA blends
    Cong Yan, Defa Hou, Kai Zhang, Mingbo Yang · 2023 · Polymer
  28. A Comprehensive Review of Real-time Monitoring and Predictive Maintenance Techniques: Revolutionizing Natural Fibre Composite Materials Maintenance with IoT
    A. Felix Sahayaraj, Indran Suyambulingam, Jenish Iyyadurai, Divya Divakaran, Sanjay Mavinkere Rangappa, Suchart Siengchin · 2023 · Pertanika journal of science & technology
  29. Environmental-Friendly Biodegradable Polymers and Composites
    Anne Bergeret · 2011 · InTech eBooks
  30. Effect of electrospun ethylene vinyl alcohol copolymer (EVOH) fibres on the structure, morphology, and properties of poly(lactic acid) (PLA)
    Ramesh Neppalli, Valerio Causin, Antonio Marigo, Martina Meincken, Patrice C. Hartmann, Albert Johannes van Reenen · 2013 · Polymer
  31. Heat resistance of biobased materials, evaluation and effect of processing techniques and additives
    Nanou Peelman, Peter Ragaert, Kim Ragaert, Mustafa Erkoç, Willem Van Brempt, Femke Faelens, Frank Devlieghere, Bruno De Meulenaer, Ludwig Cardon · 2017 · Polymer Engineering and Science
  32. Effects of modified nano-silica on the microstructure of PVDF and its microporous membranes
    Meng Zhao, Zhou-Zhi Ren, Mingbo Yang, Wei Min Yang · 2019 · Journal of Polymer Research
  33. Effects of thermoplastic polyurethane on the properties of poly(lactic acid)/organo‐montmorillonite nanocomposites based on novel vane extruder
    Shikui Jia, Jinping Qu, Rongyuan Chen, Chengran Wu, Zan Huang, Shufeng Zhai, Weifeng Liu, Yanhong Feng · 2013 · Polymer Engineering and Science
  34. The influence of the dispersed phase on the morphology, mechanical and thermal properties of PLA/PE‐LD and PLA/PE‐HD polymer blends and their nanocomposites with TiO2 and CaCO3
    Vedrana Lovinčić Milovanović, Ivana Hajdinjak, Ivona Lovriša, Domagoj Vrsaljko · 2019 · Polymer Engineering and Science
  35. Biodegradable polymer/layered silicate nanocomposites
    Suprakas Sinha Ray, Mosto Bousmina · 2006 · Elsevier eBooks
  36. Development of Crystallization in PLA during Solid-State Foaming Process using Sub-Critical CO 2
    Xiaoxi Wang, Vipin Kumar, Wei Li · 2012 · Cellular Polymers
  37. Thermal properties and crystallization kinetics of poly(butylene suberate)
    Zhiming Cui, Zhaobin Qiu · 2015 · Polymer
  38. Degradation of Plasticised Poly(lactide) Composites with Nanofibrillated Cellulose in Different Hydrothermal Environments
    Marcus Wolf, O. Gil-Castell, Juan Cea, J. C. Carrasco, Amparo Ribes-Greus · 2022 · Journal of Polymers and the Environment
  39. Presentation of machine learning methods and multi-objective optimization of fracture indices for asphalt rubber mixtures containing wax-based warm mix additives modified by nano calcium carbonate
    Seyed Mohsen Hosseinian, Payam Bazoobandi, Seyed Roohollah Mousavi, Farman Karimi · 2023 · Construction and Building Materials
  40. Mechanical, Thermal and Morphological Properties of Injection Molded Poly(lactic acid)/Calcium Carbonate Nanocomposites
    Wen Shyang Chow, Ying Ying Leu, Z. A. Mohd Ishak · 2015 · Periodica Polytechnica Mechanical Engineering
  41. Improved Biodegradation and Thermal Properties of Poly(lactic acid)/Layered Silicate Nanocomposites
    Muktikanta Panigrahi, Narendra K. Singh, Rajeev K. Gautam, Rathindra Mohan Banik, Pralay Maiti · 2010 · Composite Interfaces
  42. Functional Biopolymer Composites
    Sarat Kumar Swain, Anupama Pattanayak, Amrita Pritam Sahoo · 2017 · Springer series on polymer and composite materials
  43. Poly( L ‐lactic acid)/silicon dioxide nanocomposite prepared via the in situ melt polycondensation of L ‐lactic acid in the presence of acidic silica sol: Isothermal crystallization and melting behaviors
    Dan Cao, Linbo Wu · 2008 · Journal of Applied Polymer Science
  44. Morphology and rheology on the blends of PLA/CMPS
    Boo Young Shin, Gyu Soon Jo, Kyoung Su Kang, Tae Jin Lee, Bong Shik Kim, Sang Il Lee, Jeong Sup Song · 2007 · Macromolecular Research
  45. Assessment of Thermal Properties of Nanoclay-Modified Bitumen
    Bahadır Yılmaz, Ahmet Münir Özdemir, Havanur Ebru Gürbüz · 2022 · Arabian Journal for Science and Engineering
  46. Isotactic polypropylene modified with clay and hydrocarbon resin: Compatibility, structure and morphology in dependence on crystallization conditions
    Sossio Cimmino, Donatella Duraccio, Clara Silvestre, Marilena Pezzuto · 2009 · Applied Surface Science
  47. Preparation and Characterization of Bletilla striata Polysaccharide/Polylactic Acid Composite
    Renyu Yang, Dongyue Wang, Hongli Li, Yi He, Xiangyu Zheng, Mingwei Yuan, Minglong Yuan · 2019 · Molecules
  48. Electrospun nylon fibers for the improvement of mechanical properties and for the control of degradation behavior of poly(lactide)-based composites
    Ramesh Neppalli, Carla Marega, Antonio Marigo, Madhab Prasad Bajgai, Hak Yong Kim, Suprakas Sinha Ray, Valerio Causin · 2012 · Journal of materials research/Pratt's guide to venture capital sources
  49. The Emerging Usage and Applications of Nanotechnology in Food Processing Industries: The new age of Nanofood
    Alok Prakash, Shampa Sen, Rishabh Dixit · 2013
  50. Biopolyester-Based Systems Containing Naturally Occurring Compounds with Enhanced Thermo-Oxidative Stability
    Rossella Arrigo, Elisabetta Morici, Nadka Tzankova Dintcheva · 2016 · Journal of Applied Biomaterials & Functional Materials
  51. Enhancing crystallization rate and melt strength of PLLA with four‐arm PLLA grafted silica: The effect of molecular weight of the grafting PLLA chains
    Xiang‐Ling Lai, Wei Min Yang, Zhao Wang, Da‐Wei Shi, Zheng‐Ying Liu, Mingbo Yang · 2017 · Journal of Applied Polymer Science
  52. Review of Nano-clay Polymer Composites for Controlled Nitrogen Release: Prospects and Limitations
    Bitish Kumar Nayak, Dibyendu Chatterjee, Ranjan Paul, Saikat Ranjan Das, Totan Adak, Nintu Mandal, Julia Drewer, Abhijit Pradhan, Manik Chandra Kundu, Asit Kumar Pal et al. · 2025 · Agricultural Research
  53. Engineering the Effect of Nanomaterials on Bitumen and Asphalt Mixture Properties. A Review
    Gholamali Shafabakhsh, Mostafa Sadeghnejad, Sajad Alizadeh · 2023 · The Baltic Journal of Road and Bridge Engineering
  54. Poly(lactic acid)/p-phenylenediamine functionalized graphene oxidized nanocomposites: Preparation, rheological behavior and biodegradability
    Yang Li, Weijun Zhen · 2019 · European Polymer Journal
  55. Composite of PLA Nanofiber and Hexadecyl Trimethyl-Ammonium Chloride-Modified Montmorillonite Clay: Fabrication and Morphology
    Muhammad Mushtaq, Muhammad Wasim, Muhammad Awais Naeem, M.R. Khan, Yue Sun, Hina Saba, Tanveer Hussain, Qasim Siddiqui, Amjad Farooq, Qufu Weı · 2020 · Coatings
  56. Water Absorption of Poly(lactic acid) Nanocomposites: Effects of Nanofillers and Maleated Rubbers
    Wen Shyang Chow, Y. Y. Leu, Z. A. Mohd Ishak · 2014 · Polymer-Plastics Technology and Engineering
  57. Stereocomplex-nanocomposite formation of polylactide/fluorinated-clay with superior thermal property using supercritical fluid
    Purba Purnama, Soon Ho Lim, Youngmee Jung, Soo Hyun Kim · 2012 · Macromolecular Research
  58. Barrier properties of polylactic acid/layered silicate nanocomposites for food contact applications
    Burcu Şengül, Nursel Dilsiz · 2014 · Polymer Science Series A
  59. An Investigation on the Effect of Silica Aerogel Content on Thermal and Mechanical Properties of Sisal/PLA Nano Composites
    Chavidi Venkata Prasad, Posa Sudhakara, M. N. Prabhakar, Atta ur Rehman Shah, Jung‐il Song · 2016 · Polymer Composites
  60. Pathways to Biodegradable Flame Retardant Polymer (Nano)Composites
    Marius Murariu, Fouad Laoutid, Philippe Dúbois, Gaëlle Fontaine, Serge Bourbigot, Éric Devaux, Christine Campagne, M. Ferreira, Samuel Solarski · 2014 · Elsevier eBooks
  61. Cationic and Anionic Clays for Biological Applications
    Jin‐Ho Choy, Man Park · 2004 · Interface science and technology
  62. Effect of different preparation routes on the structure and properties of rigid polyurethane‐layered silicate nanocomposites
    Tim Woo, Peter J. Halley, Darren James Martin, Dae Su Kim · 2006 · Journal of Applied Polymer Science
  63. Preparation and properties of melt‐blended polylactic acid/polyethylene glycol‐modified silica nanocomposites
    Sun‐Mou Lai, Jhong‐Ren Chen, J. L. Han, Yi‐Fei Yu, Hui‐Yu Lai · 2013 · Journal of Applied Polymer Science
  64. Composites of poly(lactic) acid/thermoplastic polyurethane/mica with compatibilizer: morphology, miscibility and interphase
    Shikui Jia, Zhong Wang, Yan Mei Zhu, LiGui Chen, Lei Fu · 2015 · RSC Advances
  65. Microwave energy assisted synthesis of poly lactic acid via continuous reactive extrusion: modelling of reaction kinetics
    Satya P. Dubey, Hrushikesh A. Abhyankar, Veronica Marchante, James Brighton, Björn Bergmann, Giang Trinh, Chantal David · 2017 · RSC Advances
  66. Structure, properties and rheological behavior of thermoplastic poly(lactic acid)/quaternary fulvic acid-intercalated saponite nanocomposites
    Weijun Zhen, Wentao Wang · 2015 · Polymer Bulletin
  67. Fabrication of Highly Interconnected Poly(ε-caprolactone)/cellulose Nanofiber Composite Foams by Microcellular Foaming and Leaching Processes
    Jiawei Li, Hongyao Wang, Hongfu Zhou, Jing Jiang, Xiaofeng Wang, Qian Li · 2021 · ACS Omega
  68. Unique uniformity of calcium phosphate nanoparticle distribution in polymer substrates for additive manufacturing
    Abdalla Abdal‐hay, Michal Bartnikowski, Fanny Blaudez, Cédryck Vaquette, Dietmar Werner Hutmacher, Sašo Ivanovski · 2023 · Composites Part A Applied Science and Manufacturing
  69. Cross‐linked and uncross‐linked biodegradable nanocomposites. I. Nonisothermal crystallization kinetics and gas permeability
    Yeng‐Fong Shih, T. Y. Wang, Ru‐Jong Jeng, J. Y. Wu, Dong‐Sing Wuu · 2008 · Journal of Applied Polymer Science
  70. Poly(lactic acid)/Organo-Montmorillonite Nanocomposites: Synthesis, Structures, Permeation Properties and Applications
    Burcu Şengül, Rasha M. El‐Abassy, Arnulf Materny, Nursel Dilsiz · 2017 · Polymer Science Series A
  71. Effect of stereocomplex crystal and flexible segments on the crystallization and tensile behavior of poly( l -lactide)
    Xiaolu Li, Xiuqin Zhang, Guoming Liu, Zhongkai Yang, Bo Yang, Yue Qi, Rui Wang, De‐Yi Wang · 2018 · RSC Advances
  72. Improvement of interfacial adhesion and mechanical properties of sisal fiber‐reinforced poly(lactic acid) composites with added bisoxazoline
    Zhanglin Lv, Hongwu Wu, Pei Yunmeng, Lan Bi · 2020 · Polymer Composites
  73. Effects of Nanofillers on the Hydrolytic Degradation of Polyesters
    Saiyou Gai, Jiajia Xu, Hongbo Zhang, Ruixue Yin, Wenjun Zhang · 2020 · Tissue Engineering Part B Reviews
  74. Compatibility improvement of poly(lactic acid)/thermoplastic polyurethane blends with 3‐aminopropyl triethoxysilane
    Sun‐Mou Lai, Yu‐Chi Lan, Wanling Wu, Y. Wang · 2015 · Journal of Applied Polymer Science
  75. Synthesis of hydroxyapatite coatings on metal substrates using a spincasting technique
    Qiuhua Yuan, Laxmi Sahu, Nandika Anne D’Souza, Teresa Diane Golden · 2009 · Materials Chemistry and Physics
  76. Reactive blending of polylactic acid/polyethylene glycol toward biodegradable film
    Ali Salimi, Shervin Ahmadi, Mona Faramarzi, Jalal Faghihi · 2023 · Macromolecular Research
  77. Hierarchical structures of olefinic blocky copolymer/montmorillonite nanocomposites with collapsed and intercalated clay layers
    Zaizai Tong, Bing Qin Zhou, Jie Huang, Junting Xu, Zhiqiang Fan · 2014 · RSC Advances
  78. Nanocomposites based on poly(ϵ‐caprolactone) and the montmorillonite treated with dibutylamine‐terminated ϵ‐caprolactone oligomer
    Mitsuhiro Shibata, Naozumi Teramoto, Yoshihiro Someya, 塚尾 怜司 · 2007 · Journal of Applied Polymer Science
  79. An Advanced Class of Bio‐Hybrid Materials: Bionanocomposites of Inorganic Clays and Organic Stereocomplex Polylactides
    Purba Purnama, Youngmee Jung, Soo Hyun Kim · 2012 · Macromolecular Materials and Engineering
  80. Stability of nanocomposites of poly(ε-caprolactone) with tungsten trioxide
    A. V. Machado, Gabriela Botelho, M. Manuela P. Silva, Isabel Correia Neves, António Maurício C. Fonseca · 2011 · Journal of Polymer Research
  81. Incorporating amylopectin in poly(lactic acid) by melt blending using poly(ethylene‐co‐vinyl alcohol) as a thermoplastic carrier. II. Physical properties
    M. D. Sanchez‐Garcia, David Nordqvist, Mikael Stefan Hedenqvist, Jose Maria Lagaron · 2010 · Journal of Applied Polymer Science
  82. Composites
    Subrata Bandhu Ghosh, Sanchita Bandyopadhyay‐Ghosh, Mohini M. Sain · 2010 · Wiley eBooks
  83. Design and Synthesis of Stereoblock Polylactic Acid with High Oxygen and Water Vapor Barrier Performances
    Jilong Cao, Wanling Li, Yun Huang, Long Jiang, Yi Dan · 2023 · Industrial & Engineering Chemistry Research
  84. Preparation, Characterization and Drug Release Studies from Poly(D,L-lactic acid)/organoclay Nanocomposite Films
    C. Stathokostopoulou, Petroula A. Tarantili · 2014 · Journal of Macromolecular Science Part A
  85. Vermiculite/poly(lactic acid) composites: Effect of nature of vermiculite on hydrolytic degradation in alkaline medium
    M. Dolores Fernández, M. Jesús Fernández · 2017 · Applied Clay Science
  86. Effect of synthetic mica on the thermal properties of poly(lactic acid)
    Diego H. S. Souza, Cristina Tristão Andrade, Marcos Lopes Dias · 2014 · Polímeros
  87. Effects of Formulation, Structure, and Processing on Biodegradation of Starches
    Parveen Sangwan, Eustathios Petinakis, Katherine Dean · 2014 · Elsevier eBooks
  88. Less‐ordered lamellar structure of intercalated poly( L ‐lactide)/organo‐modified montmorillonite hybrids
    Pham Hoai Nam, Naoya Ninomiya, Atsuhiro Fujimori, Tōru Masuko · 2006 · Polymer Engineering and Science
  89. Exfoliated graphite/acrylic composite film as hydrophobic coating of 3D-printed polylactic acid surfaces
    Bryan B. Pajarito, Carlo Angelo L. Cayabyab, Patrick Aldrei C. Costales, Jasmine R. Francisco · 2019 · Journal of Coatings Technology and Research
  90. Poly(lactic acid) nanocomposites with improved impact and thermal properties
    WS Chow, Y. Y. Leu, ZA Mohd Ishak · 2012 · Journal of Composite Materials
  91. Physical Properties, Crystallization, and Thermal/Hydrolytic Degradation of Poly( L ‐lactide)/Nano/Micro‐Diamond Composites
    Hideto Tsuji, Toshiyuki Aratani, Hirofumi Takikawa · 2013 · Macromolecular Materials and Engineering
  92. Ring-Opening Polymerization of Cyclic Esters
    Jean‐Marie Raquez, Rosica Mincheva, Olivier Coulembier, Philippe Dúbois · 2012 · Elsevier eBooks
  93. Influence of high molecular weight poly(ethylene adipate) on the crystallization behavior and mechanical properties of biodegradable poly(l-lactide) in their immiscible polymer blend
    Xue‐Yan He, Zhaobin Qiu · 2018 · Polymer Testing
  94. Stimuli-Responsive Polymer-Clay Nanocomposites under Electric Fields
    Shang Hao Piao, Seung Hee Kwon, Hyoung Jin Choi · 2016 · Materials
  95. Viscoelastic properties of exfoliated polyamide-6/layered silicate nanocomposite
    Jeong‐Seok Choi, Sung Taek Lim, Hyoung Jin Choi, András Pozsgay, László Százdi, Béla Pukánszky · 2005 · Journal of Materials Science
  96. Development of Stereocomplex Polylactide Nanocomposites as an Advanced Class of Biomaterials—A Review
    Muhammad Samsuri, Purba Purnama · 2023 · Polymers
  97. Polylactide and hybrid silicasol nanoparticle‐based composites
    Andrey S. Zhiltsov, O.T. Gritsenko, Valentina V. Kazakova, Olga B. Gorbatsevich, Natalia P. Bessonova, А.А. Аскадский, Olga A. Serenko, Aziz M. Muzafarov · 2015 · Journal of Applied Polymer Science
  98. Nanocomposites for food and beverage packaging materials
    M.D. Sanchez Garcia, Jose Maria Lagaron · 2012 · Elsevier eBooks
  99. Characterization of clay platelet orientation in polylactide–montmorillonite nanocomposite films by X-ray pole figures
    Z. Bartczak, Artur Różański, Józef Richert · 2014 · European Polymer Journal
  100. Estudo da influência de argilas organofílicas no processo de biodegradação do PLA
    Patrícia Moraes Sinohara Souza, Ana Rita Morales, Maria Aparecida Marin‐Morales, Lúcia Helena Innocentini Mei · 2014 · Polímeros