The DOI matches its Crossref record; 86 of the 86 references it cites were found in a registry or an index.
Biobased Polyamides: Recent Advances in Basic and Applied Research
Abstract
Polyamides represent a very important class of polymers for a wide range of applications. After establishing in the 1930s with Nylon and Perlon, their impact on many branches has been continuously growing. In the context of developing sustainable polymers from renewable resources, many polyamides have meanwhile been described, which are based on natural building blocks. In addition to their sustainability, these biobased starting materials can provide special structural features to the resulting polymers and their properties, e.g., side groups, functionalities, or stereoinformation. While some biopolyamides are known for decades and well established (e.g., PA‐11, Rilsan), many other promising candidates have been described in fundamental research studies, which have high potential but whose capability—especially for large scale and/or high‐performance materials—will have to be proved in the future. Other candidates are very interesting from a scientific point of view, but with less potential for a market establishment due to price and/or feasibility reasons. This article aims at collating the recent developments in the field of biopolyamides and elucidating their properties and potential for different applications.image
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Path Forward for Biofuels and Biomaterials
Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A., Frederick, W. J., Hallett, J. P., Leak, D. J., Liotta, C. L., et al. (2006) · Science · doi:10.1126/science.1114736 · Cited by 5,741
Green Chemistry: Principles and Practice
Anastas, P., & Eghbali, N. (2010) · Chem. Soc. Rev. · doi:10.1039/b918763b · Cited by 5,256
Hill, D. J., Mio, M. J., Prince, R. B., Hughes, T. S., & Moore, J. S. (2001) · Chemical Reviews · doi:10.1021/cr990120t · Cited by 2,239
Green and sustainable manufacture of chemicals from biomass: state of the art
Sheldon, R. A. (2014) · Green Chem. · doi:10.1039/c3gc41935e · Cited by 1,678
Plant oil renewable resources as green alternatives in polymer science
Meier, M. A. R., Metzger, J. O., & Schubert, U. S. (2007) · Chemical Society Reviews · doi:10.1039/b703294c · Cited by 1,487
Direct Synthesis of Amides from Alcohols and Amines with Liberation of H 2
Gunanathan, C., Ben-David, Y., & Milstein, D. (2007) · Science · doi:10.1126/science.1145295 · Cited by 1,288
Castor oil: A vital industrial raw material
OGUNNIYI, D. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.03.028 · Cited by 1,104
Oils and Fats as Renewable Raw Materials in Chemistry
Biermann, U., Bornscheuer, U., Meier, M. A. R., Metzger, J. O., & Schäfer, H. J. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201002767 · Cited by 1,003
Polymers from Renewable Resources: A Perspective for a Special Issue of Polymer Reviews
Williams, C., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834133 · Cited by 977
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Biodegradable and Bio‐Based Polymers: Future Prospects of Eco‐Friendly Plastics
Iwata, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410770 · Cited by 937
Foldamers as versatile frameworks for the design and evolution of function
Goodman, C. M., Choi, S., Shandler, S., & DeGrado, W. F. (2007) · Nature Chemical Biology · doi:10.1038/nchembio876 · Cited by 899
E factors, green chemistry and catalysis: an odyssey
Sheldon, R. A. (2008) · Chemical Communications · doi:10.1039/b803584a · Cited by 888
The crystal structure of polycaproamide: Nylon 6
Holmes, D. R., Bunn, C. W., & Smith, D. J. (1955) · Journal of Polymer Science · doi:10.1002/pol.1955.120178401 · Cited by 813
Progress of Polymers from Renewable Resources: Furans, Vegetable Oils, and Polysaccharides
Gandini, A., Lacerda, T. M., Carvalho, A. J. F., & Trovatti, E. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00264 · Cited by 756
Castor oil as a renewable resource for the chemical industry
Mutlu, H., & Meier, M. A. R. (2010) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.200900138 · Cited by 733
Green Polymer Chemistry and Bio‐based Plastics: Dreams and Reality
Mülhaupt, R. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200439 · Cited by 709
Sousa, A. F., Vilela, C., Fonseca, A. C., Matos, M., Freire, C. S. R., Gruter, G.-J. M., Coelho, J. F. J., & Silvestre, A. J. D. (2015) · Polymer Chemistry · doi:10.1039/c5py00686d · Cited by 700
Succinic Acid: A New Platform Chemical for Biobased Polymers from Renewable Resources
Bechthold, I., Bretz, K., Kabasci, S., Kopitzky, R., & Springer, A. (2008) · Chemical Engineering & Technology · doi:10.1002/ceat.200800063 · Cited by 686
Recent Advances in the Catalytic Synthesis of 2,5-Furandicarboxylic Acid and Its Derivatives
Zhang, Z., & Deng, K. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b01491 · Cited by 641
Geilen, F. M. A., Engendahl, B., Harwardt, A., Marquardt, W., Klankermayer, J., & Leitner, W. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201002060 · Cited by 618
Schoch, K. F. (1996) · IEEE Electrical Insulation Magazine · doi:10.1109/mei.1996.537196 · Cited by 606
Nature or Petrochemistry?—Biologically Degradable Materials
Mecking, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200301655 · Cited by 589
Synthesis, chemistry and applications of 5-hydroxymethyl-furfural and its derivatives
Lewkowski, J. (2001) · Arkivoc · doi:10.3998/ark.5550190.0002.102 · Cited by 496
Controlled Polymerization of Next-Generation Renewable Monomers and Beyond
Yao, K., & Tang, C. (2013) · Macromolecules · doi:10.1021/ma3019574 · Cited by 485
Buntara, T., Noel, S., Phua, P. H., Melián‐Cabrera, I., de Vries, J. G., & Heeres, H. J. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201102156 · Cited by 477
Polyamides – Still Strong After Seventy Years
Marchildon, K. (2011) · Macromolecular Reaction Engineering · doi:10.1002/mren.201000017 · Cited by 437
Sustainable Polymers: Opportunities for the Next Decade
Miller, S. A. (2013) · ACS Macro Letters · doi:10.1021/mz400207g · Cited by 382
Carothers, W. H. (1931) · Chemical Reviews · doi:10.1021/cr60031a001 · Cited by 352
Benzene‐Free Synthesis of Adipic Acid
Niu, W., Draths, K. M., & Frost, J. W. (2002) · Biotechnology Progress · doi:10.1021/bp010179x · Cited by 343
Green building blocks for bio‐based plastics
Harmsen, P. F. H., Hackmann, M. M., & Bos, H. L. (2014) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1468 · Cited by 315
Kind, S., Neubauer, S., Becker, J., Yamamoto, M., Völkert, M., Abendroth, G. V., Zelder, O., & Wittmann, C. (2014) · Metabolic Engineering · doi:10.1016/j.ymben.2014.05.007 · Cited by 303
Biomass in the manufacture of industrial products—the use of proteins and amino acids
Scott, E., Peter, F., & Sanders, J. (2007) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-007-0932-x · Cited by 292
Molecular design and syntheses of glycopolymers
Okada, M. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00038-1 · Cited by 254
Long-Chain Linear C 19 and C 23 Monomers and Polycondensates from Unsaturated Fatty Acid Esters
Stempfle, F., Quinzler, D., Heckler, I., & Mecking, S. (2011) · Macromolecules · doi:10.1021/ma200627e · Cited by 203
Direct Synthesis of Polyamides via Catalytic Dehydrogenation of Diols and Diamines
Zeng, H., & Guan, Z. (2011) · Journal of the American Chemical Society · doi:10.1021/ja106958s · Cited by 191
Winnacker, M., & Rieger, B. (2015) · ChemSusChem · doi:10.1002/cssc.201500421 · Cited by 179
Self-citationRenewable polyamides and polyurethanes derived from limonene
Firdaus, M., & Meier, M. A. R. (2013) · Green Chem. · doi:10.1039/c2gc36557j · Cited by 176
Assessment of polyamide-6 crystallinity by DSC: Temperature dependence of the melting enthalpy
Millot, C., Fillot, L.-A., Lame, O., Sotta, P., & Seguela, R. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-4670-5 · Cited by 173
Novel, Fully Biobased Semicrystalline Polyamides
Jasińska, L., Villani, M., Wu, J., van Es, D. S., Klop, E. A., Rastogi, S., & Koning, C. E. (2011) · Macromolecules · doi:10.1021/ma200256v · Cited by 146
Dendritic and hyperbranched polyamides
Scholl, M., Kadlecová, Z., & Klok, H. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.09.001 · Cited by 135
Jiang, Y. F., Maniar, D., Woortman, A. J. J., van Ekenstein, G. O. R. A., & Loos, K. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b01172 · Cited by 135
Bio-based polyamides reinforced with cellulosic fibres – Processing and properties
Feldmann, M., & Bledzki, A. K. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.06.008 · Cited by 128
Unsaturated PA X,20 from Renewable Resources via Metathesis and Catalytic Amidation
Mutlu, H., & Meier, M. A. R. (2009) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900045 · Cited by 118
Synthesis, thermal and mechanical properties and biodegradation of branched polyamide 4
Kawasaki, N., Nakayama, A., Yamano, N., Takeda, S., Kawata, Y., Yamamoto, N., & Aiba, S. (2005) · Polymer · doi:10.1016/j.polymer.2005.06.092 · Cited by 117
Eschenfeldt, W. H., Zhang, Y., Samaha, H., Stols, L. M., Eirich, L. D., Wilson, C. R., & Donnelly, M. I. (2003) · Applied and Environmental Microbiology · doi:10.1128/aem.69.10.5992-5999.2003 · Cited by 114
Epoxy resins from rosin acids: synthesis and characterization
Atta, A. M., Mansour, R., Abdou, M. I., & Sayed, A. M. (2004) · Polymers for Advanced Technologies · doi:10.1002/pat.507 · Cited by 112
Dimer acid-based thermoplastic bio-polyamides: Reaction kinetics, properties and structure
Hablot, E., Donnio, B., Bouquey, M., & Avérous, L. (2010) · Polymer · doi:10.1016/j.polymer.2010.10.026 · Cited by 109
Synthesis and characterization of furanic polyamides
Mitiakoudis, A., & Gandini, A. (1991) · Macromolecules · doi:10.1021/ma00004a003 · Cited by 109
Polymeric amides from diamines and dibasic acids
Coffman, D. D., Berchet, G. J., Peterson, W., & Spanagel, E. W. (1947) · Journal of Polymer Science · doi:10.1002/pol.1947.120020308 · Cited by 108
Fatty acid derived renewable polyamides via thiol–ene additions
Türünç, O., Firdaus, M., Klein, G., & Meier, M. A. R. (2012) · Green Chemistry · doi:10.1039/c2gc35982k · Cited by 104
Kiely, D. E., Chen, L., & Lin, T. (2000) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(20000201)38:3<594::aid-pola24>3.0.co;2-# · Cited by 101
Maximum fossil fuel feedstock replacement potential of petrochemicals via biorefineries
Brehmer, B., Boom, R. M., & Sanders, J. P. M. (2009) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2009.07.010 · Cited by 100
Rilsan (Polyamid 11), Synthese und Eigenschaften
Genas, M. (1962) · Angewandte Chemie · doi:10.1002/ange.19620741504 · Cited by 96
Isohexide Derivatives from Renewable Resources as Chiral Building Blocks
Wu, J., Eduard, P., Thiyagarajan, S., van Haveren, J., van Es, D. S., Koning, C. E., Lutz, M., & Guerra, C. F. (2011) · ChemSusChem · doi:10.1002/cssc.201100076 · Cited by 95
Preparation and some properties of nylon 46
Gaymans, R. J., Utteren, T. E. C. V., van den Berg, J. W. A., & Schuyer, J. (1977) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1977.170150303 · Cited by 93
α,ω‐Functionalized C19 Monomers
Walther, G., Deutsch, J., Martin, A., Baumann, F., Fridag, D., Franke, R., & Köckritz, A. (2011) · ChemSusChem · doi:10.1002/cssc.201100187 · Cited by 89
STUDIES ON POLYMERIZATION AND RING FORMATION. VIII. AMIDES FROM ε-AMINOCAPROIC ACID
Carothers, W. H., & Berchet, G. J. (1930) · Journal of the American Chemical Society · doi:10.1021/ja01375a091 · Cited by 74
Fehrenbacher, U., Grosshardt, O., Kowollik, K., Tübke, B., Dingenouts, N., & Wilhelm, M. (2009) · Chemie Ingenieur Technik · doi:10.1002/cite.200900090 · Cited by 73
Winkler, M., & Meier, M. A. R. (2014) · Green Chemistry · doi:10.1039/c4gc00273c · Cited by 69
Ring-Opening Polymerization of Cyclic Amides (Lactams)
Russo, S., & Casazza, E. (2012) · Elsevier eBooks · doi:10.1016/b978-0-444-53349-4.00109-6 · Cited by 66
Renewable Polymers: Synthesis, Processing, and Technology
(2012) · Focus on Catalysts · doi:10.1016/s1351-4180(12)70376-8 · Cited by 60
Polyamides from renewable sources as matrices of short fiber reinforced biocomposites
Kuciel, S. T., Kuźniar, P., & Liber-Kneć, A. (2012) · Polimery · doi:10.14314/polimery.2012.627 · Cited by 56
Chiral building blocks from biomass: 2,5-diamino-2,5-dideoxy-1,4-3,6-dianhydroiditol
Thiyagarajan, S., Gootjes, L., Vogelzang, W., Wu, J., van Haveren, J., & van Es, D. S. (2010) · Tetrahedron · doi:10.1016/j.tet.2010.11.031 · Cited by 56
Poly(3-Hydroxybutyrate) from Carbon Monoxide
Reichardt, R., & Rieger, B. (2011) · Advances in polymer science · doi:10.1007/12_2011_127 · Cited by 54
Self-citationWallace H. Carothers and Fundamental Research at Du Pont
Smith, J. K., & Hounshell, D. A. (1985) · Science · doi:10.1126/science.229.4712.436 · Cited by 54
Jasińska-Walc, L., Villani, M., Dudenko, D., van Asselen, O. L. J., Klop, E. A., Rastogi, S., Hansen, M. R., & Koning, C. E. (2012) · Macromolecules · doi:10.1021/ma300133d · Cited by 50
Computational study of thermal and mechanical properties of nylons and bio-based furan polyamides
Yeh, I., Rinderspacher, B. C., Andzelm, J., Cureton, L. T., & Scala, J. L. (2013) · Polymer · doi:10.1016/j.polymer.2013.11.009 · Cited by 49
Winnacker, M., Neumeier, M., Zhang, X., Papadakis, C. M., & Rieger, B. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201600056 · Cited by 49
Self-citationWu, J., Jasińska-Walc, L., Dudenko, D., Różański, A., Hansen, M. R., van Es, D. S., & Koning, C. E. (2012) · Macromolecules · doi:10.1021/ma302126b · Cited by 47
Winnacker, M., Vagin, S. I., Auer, V., & Rieger, B. (2014) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201400324 · Cited by 45
Self-citationCrystallization study on absorbable poly(p-dioxanone) polymers by differential scanning calorimetry
Andjeli, S. A., Jamiolkowski, D. D., McDivitt, J., Fischer, J., Zhou, J. J., & Vetrecin, R. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010124)79:4<687::aid-app130>3.0.co;2-9 · Cited by 42
Structure and Molecular Dynamics in Renewable Polyamides from Dideoxy–Diamino Isohexide
Jasińska-Walc, L., Dudenko, D., Różański, A., Thiyagarajan, S., Sowiński, P., van Es, D. S., Shu, J., Hansen, M. R., & Koning, C. E. (2012) · Macromolecules · doi:10.1021/ma301091a · Cited by 41
Winkler, M., & Meier, M. A. R. (2013) · Green Chemistry · doi:10.1039/c3gc41921e · Cited by 41
Preparation and some properties of nylon‐4,2
Gaymans, R. J., Venkatraman, V. S., & Schuijer, J. (1984) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1984.170220618 · Cited by 41
Unsaturated Polyamides from Bio‐Based Z‐octadec‐9‐enedioic Acid
Pardal, F., Salhi, S., Rousseau, B., Tessier, M., Claude, S., & Fradet, A. (2007) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200700319 · Cited by 38
Könst, P., Franssen, M. C. R., Scott, E. L., & Sanders, J. P. M. (2011) · Green Chemistry · doi:10.1039/c0gc00564a · Cited by 33
Winnacker, M., Tischner, A., Neumeier, M., & Rieger, B. (2015) · RSC Advances · doi:10.1039/c5ra15656d · Cited by 30
Self-citationSynthesis and characterization of polyamides X 18
Cui, X., Li, W., Yan, D., Yuan, C., & Silvestro, G. D. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22160 · Cited by 26
Carboxybetaine methacrylate oligomer modified nylon for circulating tumor cells capture
Dong, C., Wang, H., Zhang, Z., Zhang, T., & Liu, B. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.07.003 · Cited by 26
Polyamides as Artificial Transcription Factors: Novel Tools for Molecular Medicine?
Schmitz, K., & Schepers, U. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200301745 · Cited by 25
Winkler, M., Steinbiß, M., & Meier, M. A. R. (2013) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.201300126 · Cited by 22
Structural studies of nylon 13,13
Prieto, A., Iribarren, I., & Muñoz‐Guerra, S. (1993) · Journal of Materials Science · doi:10.1007/bf00351232 · Cited by 20
Bennett, C., & Mathias, L. J. (2005) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.20550 · Cited by 20
Synthesis of Modified Polycaprolactams Obtained from Renewable Resources
Oelmann, S., & Meier, M. A. R. (2015) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201500257 · Cited by 14
Copolyamides derived from brassylic acid
Kim, K. S., & Yu, A. J. (1979) · Journal of Applied Polymer Science · doi:10.1002/app.1979.070230213 · Cited by 12
Cited by
Bio-based polymers with performance-advantaged properties
Cywar, R. M., Rorrer, N. A., Hoyt, C. B., Beckham, G. T., & Chen, E. Y.-X. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00363-3 · Cited by 811
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Nakajima, H., Dijkstra, P., & Loos, K. (2017) · Polymers · doi:10.3390/polym9100523 · Cited by 423
Sustainable polymers from biomass: Bridging chemistry with materials and processing
Wang, Z., Ganewatta, M. S., & Tang, C. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101197 · Cited by 422
Structure-properties relationships of cellular materials from biobased polyurethane foams
Peyrton, J., & Avérous, L. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100608 · Cited by 282
Metadata
- Authors
- Winnacker, M., & Rieger, B.
- Venue
- Macromolecular Rapid Communications
- Publisher
- Wiley
- Published
- 2016-07-26
- Volume
- 37
- Issue
- 17
- Pages
- 1391-1413
- ISSN
- 1022-1336 (ISSN-L)
- 1521-3927
- OpenAlex
- W2502323784
- Cited by
- 294
- References
- 86
- FWCI
- 8.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.