The DOI matches its Crossref record; 27 of the 28 references it cites were found in a registry or an index.
4D Printed Actuators with Soft-Robotic Functions
Open accessAbstract
Soft matter elements undergoing programed, reversible shape change can contribute to fundamental advance in areas such as optics, medicine, microfluidics, and robotics. Crosslinked liquid crystalline polymers have demonstrated huge potential to implement soft responsive elements; however, the complexity and size of the actuators are limited by the current dominant thin-film geometry processing toolbox. Using 3D printing, stimuli-responsive liquid crystalline elastomeric structures are created here. The printing process prescribes a reversible shape-morphing behavior, offering a new paradigm for active polymer system preparation. The additive character of this technology also leads to unprecedented geometries, complex functions, and sizes beyond those of typical thin-films. The fundamental concepts and devices presented therefore overcome the current limitations of actuation energy available from thin-films, thereby narrowing the gap between materials and practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Recently, voxelated LCEs, capable of actuating reversibly and exhibiting large work capacities, have been produced in thick-film geometries (about 1 mm thick) via 3D printing [200-204].”
From Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview (2020) · cites this paper as [203]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Electroactive phases of poly(vinylidene fluoride): Determination, processing and applications
Martins, P., Lopes, A. C., & Lanceros-Méndez, S. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.006 · Cited by 3,504
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Directed bending of a polymer film by light
Yu, Y., Nakano, M., & Ikeda, T. (2003) · Nature · doi:10.1038/425145a · Cited by 2,177
Shepherd, R. F., Ilievski, F., Choi, W., Morin, S. A., Stokes, A. A., Mazzeo, A. D., Chen, X., Wang, M. Y., & Whitesides, G. M. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1116564108 · Cited by 2,142
Programmable and adaptive mechanics with liquid crystal polymer networks and elastomers
White, T. J., & Broer, D. J. (2015) · Nature Materials · doi:10.1038/nmat4433 · Cited by 1,757
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,635
Voxelated liquid crystal elastomers
Ware, T. H., McConney, M. E., Wie, J. J., Tondiglia, V. P., & White, T. J. (2015) · Science · doi:10.1126/science.1261019 · Cited by 1,161
Digital cameras with designs inspired by the arthropod eye
Song, Y. M., Xie, Y., Malyarchuk, V., Xiao, J., Jung, I., Choi, K.-J., Liu, Z., Park, H., Lü, C., Kim, R.-H., et al. (2013) · Nature · doi:10.1038/nature12083 · Cited by 1,148
Making waves in a photoactive polymer film
Gelebart, A. H., Mulder, D. J., Varga, M., Konya, A., Vantomme, G., Meijer, E. W., Selinger, R. L. B., & Broer, D. J. (2017) · Nature · doi:10.1038/nature22987 · Cited by 1,067
Flagged first, then by citations
1 of the 28 references couldn’t be matched to a known paper.
Cited by
Sorted by citations
Items 301–369 of 369
Oligomer‐Derived Photoresponsive Liquid Crystal Elastomers with Biocompatible Operating Temperature
Najiya, N., & Lagerwall, J. P. F. (2025) · Advanced Optical Materials · doi:10.1002/adom.202500160 · Cited by 4
Welding complex-shaped actuators from dynamic liquid crystal elastomers
Jiang, J., Guo, H., Zeng, H., & Priimägi, A. (2025) · Journal of Materials Chemistry C · doi:10.1039/d5tc01194a · Cited by 4
Kumar, C. P., & Vakkalagadda, M. R. K. (2025) · Composite Interfaces · doi:10.1080/09276440.2025.2588510 · Cited by 4
“Unlike traditional robots, soft robotic systems offer exceptional capabilities, such as the ability to continuously adjust stiffness and reshape themselves to perform specific tasks, including the delicate handling and lifting of toxic or hazardous materials in the harshest of environments [155].”
Pan, Y., Shi, G., Zhang, C., Miao, J., & Liu, R. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.172280 · Cited by 5
Actuating and Sensing Composites of Liquid Crystal Elastomers and Poly(ionic liquid)s
Liu, Z., Zheng, X., Zhang, S., Xu, L., Liu, M., St-Germain, J. B., & Zhao, Y. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202529302 · Cited by 4
Microstructural Basis of Complex Mechanical Programming in Liquid Crystal Elastomers
Barnes, M., & Biggins, J. S. (2025) · Journal of Elasticity · doi:10.1007/s10659-025-10138-4 · Cited by 5
Astam, M. O., Verheesen, D., Lyu, P., Weima, S. A. M., & Liu, D. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202407355 · Cited by 4
Zhan, Y., Calierno, S., Peixoto, J. A., Mitzer, L., Broer, D. J., & Liu, D. (2022) · Angewandte Chemie · doi:10.1002/ange.202207468 · Cited by 4
UV-responsive cyclic peptide progelator bioinks
Carlini, A. S., Touve, M. A., Fernández-Caro, H., Thompson, M. P., Cassidy, M. F., Cao, W., & Gianneschi, N. C. (2019) · Faraday Discussions · doi:10.1039/c9fd00026g · Cited by 4
Variable Stiffness Actuators with Covalently Attached Nanofragments that Induce Mineralization
Cao, D., Martínez, J. G., Hara, E. S., & Jager, E. W. H. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201651 · Cited by 4
Liquid Crystal Polymer Networks and Elastomers for Light‐Fueled Robotics
Zeng, H., Lahikainen, M., Wani, O. M., Berdin, A., & Priimägi, A. (2018) · Wiley eBooks · doi:10.1002/9783527816774.ch6 · Cited by 4
Molecular Switches in Light‐Responsive Liquid‐Crystalline Polymer Actuators
Schenning, A. P. H. J., Yang, H., Fredrich, S., & Liu, L. (2022) · Wiley eBooks · doi:10.1002/9783527827626.ch25 · Cited by 4
Artificial Intelligence as the Next Visionary in Liquid Crystal Research
Astam, M. O., L'Karkouri, O., & Liu, D. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202529976 · Cited by 3
Svanidze, A. V., Kundu, S., Iadlovska, O. S., Thakur, A. K., Zheng, X. A., & Palffy‐Muhoray, P. (2024) · Crystals · doi:10.3390/cryst15010001 · Cited by 3
4D printing of direct-driven deformable wheel with multiple programmable configurations
Tian, H., Chu, G., Zhou, B., Zhou, D., Qiao, J., & Li, L. (2025) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ada7ab · Cited by 3
“For instance, shape memory polymer materials can overcome a certain load during the recovery process [31, 32], while liquid crystal elastomer (LCE) materials can bear a certain load in the contraction direction [33, 34].”
Actuation of Liquid Crystalline Elastomers at or Below Ambient Temperature
Bauman, G. E., McCracken, J. M., & White, T. J. (2022) · Angewandte Chemie · doi:10.1002/ange.202202577 · Cited by 3
Zeenat, L., Zolfagharian, A., Bodaghi, M., & Pati, F. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95151-7.00013-2 · Cited by 3
Microfluidic Preparation of Liquid Crystalline Elastomer Actuators
Hessberger, T., Braun, L. B., Serra, C. A., & Zentel, R. (2018) · Journal of Visualized Experiments · doi:10.3791/57715 · Cited by 4
Artificial Muscles for Underwater Soft Robotic System
Wang, Z., He, Q., & Cai, S. (2020) · Springer eBooks · doi:10.1007/978-3-030-50476-2_4 · Cited by 3
Winters, A., Bekkers, I., Hosseini, D. N. G., Vekemans, V., Weima, S. A. M., & Bruns, M. (2022) · CHI Conference Extended Abstracts on Human Factors in Computing Systems (CHI EA) · doi:10.1145/3491101.3519769 · Cited by 3
Rapid Prototyping Dynamic Robotic Fibers for Tunable Movement
Kolvenbag, J., Bruns, M., & Winters, A. (2022) · ACM Symposium on User Interface Software and Technology (UIST) · doi:10.1145/3526114.3558696 · Cited by 3
Cross‐Linked Liquid‐Crystalline Polymers as Photomobile Materials
Ube, T., & Ikeda, T. (2019) · Wiley eBooks · doi:10.1002/9783527822201.ch8 · Cited by 3
4D-printed composite actuators
Delbart, R., Roumy, L., Harcourt, M., Robert, C., Touchard, F., Truong-Hoang, T. Q., & Martínez-Hergueta, F. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15917-6.00005-0 · Cited by 2
4D printing of autonomously controlled soft actuators for tremor vibration suppression
Mohammadi, M., Bodaghi, M., & Zolfagharian, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13673-3.00006-7 · Cited by 2
Göschl, M., Laa, D., Ahmadi, M., Koch, T., Hradil, K., Stampfl, J., Ehrmann, K., & Liska, R. (2026) · Materials Today Advances · doi:10.1016/j.mtadv.2026.100777 · Cited by 2
4D Printing of Stimuli-Responsive Materials
Yan, C., Yang, X. Y., & Wu, H. (2022) · Springer eBooks · doi:10.1007/978-3-031-04721-3_3 · Cited by 3
Manachino, M., Melis, G., Stassi, S., Ferrero, S., & Scaltrito, L. (2022) · Springer eBooks · doi:10.1007/978-3-031-13779-2_8 · Cited by 2
4D-printed structures with tunable mechanical properties
Abuzaid, W. Z., Yousuf, M. H., & Alkhader, M. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-95430-3.00006-3 · Cited by 1
Closed-loop 4D printing of autonomous soft robots
Ji, Q., Neves, D., Feng, L., & Zhao, C. S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13673-3.00008-0 · Cited by 1
Slicing vector fields into tool paths for additive manufacturing of nematic elastomers
Zmyślony, M., Dradrach, K., & Biggins, J. S. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104604 · Cited by 3
van der Doef, V., Liu, D., Tangdiongga, E., & Raz, O. (2025) · European Conference on Optical Communication · doi:10.1109/ecoc66593.2025.11262942 · Cited by 1
“A lens made with Polydimethyl-siloxane and liquid crystals to change the focal length has for example been designed [13] .”
Multi-functional liquid crystal oligomer networks for human-interactive self-regulation
Lyu, P., Astam, M. O., L'Karkouri, O., & Liu, D. (2025) · Communications Materials · doi:10.1038/s43246-025-01048-y · Cited by 1
Light-controlled beam-steering lenses for optical wireless communication systems
van der Doef, V., Dong, Q., Liu, D., Tangdiongga, E., & Raz, O. (2026) · Optical Materials Express · doi:10.1364/ome.585583 · Cited by 1
Javadzadeh, M., Fernández-Melero, M., del Barrio, J., & Sánchez‐Somolinos, C. (2026) · Materials Advances · doi:10.1039/d5ma01174d · Cited by 1
Cheung, T. C. (2026) · Progress in Additive Manufacturing · doi:10.1007/s40964-026-01611-0 · Cited by 1
Mittal, K., Tripathi, D., Rajinikanth, P. S., & Pandey, P. K. (2026) · Sustainable materials and technologies · doi:10.1016/j.susmat.2026.e02022 · Cited by 1
From lines to lattices—high-resolution 2D and 3D PDMS microarchitectures via aerosol jet printing
Kushagr, S., Hu, C., Yuan, B., Patel, D. K., Nandakumar, A., Narayan, R. L., & Panat, R. P. (2026) · npj Advanced Manufacturing · doi:10.1038/s44334-026-00080-1 · Cited by 1
Ponkratenkova, A., Starkova, O., Beļuns, S., Platnieks, O., Tropa, A., Eiduks, T. V., Kádár, R., & Gaidukovs, S. (2026) · Materials Today Communications · doi:10.1016/j.mtcomm.2026.115415 · Cited by 1
Schwarz, A., & Mehtab, S. (2026) · Macromolecular Rapid Communications · doi:10.1002/marc.70307 · Cited by 2
“…nematic phase typically exhibits anisotropic viscosity and higher orientational order, enabling efficient transfer of shear-induced alignment into the final network, whereas the isotropic phase provides lower viscosity and improved flow uniformity at the expense of mesogen ordering [ 1, 45, 48 ].”
InfluentialPENGEMBANGAN INSTRUMEN PENILAIAN E-BOOK BERBASIS INQUIRY LEARNING
Wandri, R., Vebrianto, R., & Zulfianti, G. (2023) · Quantum Jurnal Inovasi Pendidikan Sains · doi:10.20527/quantum.v14i1.15063 · Cited by 1
Gui, Q., Liu, Z., Sun, X., Guo, G., Yuan, Y., & Zhang, H. (2024) · Macromolecular Rapid Communications · doi:10.1002/marc.202400193 · Cited by 1
Soft Actuator with Integrated and Localized Sensing Properties through Parameter-Encoded 4D Printing
Li, Y., Yang, X., Li, J., Liu, Q., Li, B., & Wang, K. (2024) · Journal of Bionic Engineering · doi:10.1007/s42235-024-00552-0 · Cited by 1
“4D printing usually originates from a printed object generated using additive manufacturing method with stimulus-responsive materials, which is widely applied in functional materials and devices in soft actuators [4, 5 ], flexible sensors [ 6, 7], food [8, 9], and biomedical fields [ 10, 11].”
New Insights into Polymeric Liquid Crystals and Their Applications
Trindade, A. C., Canejo, J. P., & Almeida, P. L. (2025) · Molecules · doi:10.3390/molecules30142997 · Cited by 1
“In parallel, in Sánchez-Somolinos et al.’s research, it was found that PLC actuators enable dynamic actuator shape reconfigurability—an approach in harmony with soft reconfigurable robotics and shape-morphing systems [18].”
Hydraulically Amplified Self-Healing ELectrostatic (HASEL) Inspired ActuatorsPreprint
Wissman, J., Ikei, A., Sampath, K., & Rohde, C. A. (2021) · arXiv (Cornell University) · doi:10.48550/arxiv.2102.13039 · Cited by 1
“Soft lenses have been actuated by non-hydraulic mechanisms, such as through the use of liquid crystal elastomers (LCE) [6], or through electrical activation of an indium tin oxide (ITO) substrate on a polymer film [2].”
Photoinitiators in Various Sectors of Industrial Applications
Fouassier, J., & Lalevée, J. (2021) · Wiley eBooks · doi:10.1002/9783527821297.ch19 · Cited by 1
4D printing of gels and soft materials
Ahmed, K., & Shiblee, M. N. I. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824082-3.00004-0
Is 4D Printing Disruptive or Incremental, or a Bit of Both?
Demoly, F., & André, J. (2022) · Wiley eBooks · doi:10.1002/9781394163786.ch1
Liu, Z., Gao, P., Wu, Q., Wang, Z., Li, J., Wang, K., Li, G., Zhou, X., Song, Z., Li, B., et al. (2023) · Smart Manufacturing · doi:10.1142/s2737549823500011
Xiubao, 赵. Z., Renchun, 郭. G., Yuzhao, 章. Z., Jingang, 王. W., Jianchen, 郑. Z., & Xiaoduo, 王. W. (2023) · Chinese Journal of Lasers · doi:10.3788/cjl230608
Novel Technique to Measure Shape Memory Behavior of 4D Material
Tiwari, N., & Markad, K. M. (2024) · doi:10.1002/9781394198085.ch15
Islamiyah, E. F. N., Dewanti, B. A., & Santoso, A. M. (2024) · Quantum Jurnal Inovasi Pendidikan Sains · doi:10.20527/quantum.v15i1.17255
Design and dynamic characterization of a phototunable optofluidic lens
Sandlass, S., & Gordon, M. J. (2024) · Optics Express · doi:10.1364/oe.527369
McCracken, J. M., Bauman, G. E., Williams, G., Santos, M., Smith, L., MacCurdy, R. B., & White, T. J. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c14792
Islam, M. A., Kashem, M. N. H., Li, W., & Geerts, W. J. (2025) · AIP Advances · doi:10.1063/9.0000935
Afridi, A., Rashid, A. A., & Koç, M. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500223
“…dynamic properties to be manipulated to achieve diverse functional behaviors such as structural reconfiguration, shape memory, sensing, and actuation [27, 28], making it highly suitable for applications in soft robotics, targeted drug delivery, tissue engineering, and wearable electronics [29, 30].”
4D printing smart textiles: Technologies, materials, and structural design
Yang, L., Meng, J., Chen, K., Xue, T., Wang, Y., Zhao, Y., Liu, Y., & Zhi, C. (2026) · Materials Today Chemistry · doi:10.1016/j.mtchem.2025.103310
Gulati, L., Lee, J. W. L., Norouzikudiani, R., Li, J., Sánchez‐Somolinos, C., DeSimone, A., Melde, K., Song, A., & Fischer, P. (2026) · Advanced Materials · doi:10.1002/adma.202519970
Ceamanos, L., López‐Valdeolivas, M., Lyu, P., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2026) · Macromolecular Rapid Communications · doi:10.1002/marc.202500884
Roach, D. J., Herman, J. A., Miller, Z., Huntley, E., Gonzalez, E. N., Golecki, H. M., & Kaehr, B. (2026) · Research Square · doi:10.21203/rs.3.rs-8971871/v1
Multi-dimensional additive manufacturing for self-driven soft actuators: a materials perspective
Cho, S. Y., Yoo, Y., Jo, S. B., & Cho, J. H. (2026) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ae536a
The influence of ink preparation on the properties of 3D-printed liquid crystal elastomers
Carothers, K. J., Gibson, J., Carrola, M., Selhorst, R. C., & Auguste, A. D. (2026) · Soft Matter · doi:10.1039/d6sm00533k
BeetleBot: An integrated bioinspired soft robot for multimodal sensing and adaptive interaction
Kim, I. H., Yao, D. R., Yin, S., Tran-Ngoc, P. T., Min, J., Ng, N., Heng, W., Li, J., Sadri, B., Sato, H., et al. (2026) · Science Advances · doi:10.1126/sciadv.aeg8849
“Artificial muscles for the BeetleBot were fabricated using LCE-based actuators printed via DIW, which enables precise control over both liquid crystalline (LC) alignment and printed geometry ( 36 – 39 ).”
Programming of Complex Magnetic Profiles Enforced by 4D Printed Magnetic LCE Actuators
Espíndola-Pérez, E. R., Goyal, R. K., Gulati, L., López‐Valdeolivas, M., Fischer, P., & Sánchez‐Somolinos, C. (2026) · Advanced Materials · doi:10.1002/adma.202600029
“This digital control over the director texture and actuator geometry enables precise programming of thermally induced internal stresses and, consequently, the target deformation upon heating, as previously shown in pure LCE [ 32–34 ] and MLCEs [ 29, 30 ].”
Lalehdashti, M. K., Liu, S., & Kim, K.-Y. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7347218
Dewangan, K. (2026) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057261481036
Liquid Crystal Elastomer Actuator Matrix for Large Area Applications
Spallanzani, G., Peeters, B., Liu, D., Zalar, P., Akkerman, H. B., & Sol, J. A. H. P. (2026) · Advanced Materials Technologies · doi:10.1002/admt.71317
Han, Y. R., & Lee, S. B. (2026) · Biosensors · doi:10.3390/bios16100546
From printing to intelligence: Smart polymer composite actuators for next-generation soft robotics
Kaviani, S., Asatryan, A., Aabloo, A., Costa, C. M., Lanceros-Méndez, S., & Aghayan, M. (2026) · Applied Materials Today · doi:10.1016/j.apmt.2026.103440
Metadata
- Authors
- López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C.
- Affiliations
- Consejo Superior de Investigaciones Científicas (ES)
- Eindhoven University of Technology (NL)
- Laboratory of Functional Organic Materials and Devices Department of Chemical Engineering and Chemistry Eindhoven University of Technology P.O. Box 513 5600 MB Eindhoven The Netherlands
- Corresponding author
- Sánchez‐Somolinos, Carlos
- Venue
- Macromolecular Rapid Communications
- Publisher
- Wiley
- Published
- 2017-12-06
- Volume
- 39
- Issue
- 5
- ISSN
- 1022-1336 (ISSN-L)
- 1521-3927
- OpenAlex
- W2771751522
- Cited by
- 371
- References
- 28
- Citations by year
- 2026: 26 · 2025: 32 · 2024: 40 · 2023: 41 · 2022: 60 · 2021: 56 · 2020: 62 · 2019: 38 · 2018: 16
- FWCI
- 24.65
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Macromolecular Rapid Communications (publishedVersion, cc-by-nc-nd)
- PubMed (publishedVersion)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (publishedVersion, cc-by-nc-nd)
- TU/e Research Portal (submittedVersion, other-oa)
- TU/e Research Portal (submittedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, cc-by-nc-nd)
- Zaguan (University of Zaragoza Repository) (submittedVersion, cc-by-nc-nd)
- Funders
- Ministerio de Economía y Competitividad (SAF2014‐54763‐C2‐2‐R)
- H2020 European Research Council (66999)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (15135)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Liquid Crystal Research Advancements
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators
- Keywords
- 4D printing, soft robotics, actuators, liquid crystal elastomers, stimuli-responsive polymers, shape morphing, additive manufacturing, active polymers
- MeSH terms
- Polymers, Robotics, Temperature, Molecular Structure, Elastomers, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
