Crystal Transformation and Development of Tensile Properties upon Drawing of Poly(L‐lactic acid) by Solid‐State Coextrusion: Effects of Molecular Weight
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Melt‐crystallized films of poly(L‐lactic acid) (PLLA) with Mv in the range of 3.8 ∼ 46 × 10 4 consisting of α‐form crystals were uniaxially drawn by solid‐state coextrusion. The effects of Mv, extrusion draw ratio (EDR), and extrusion temperature (Text) on the crystal/crystal transformation from α‐ to β‐form crystals and the resultant tensile properties of drawn products were studied. The crystal transformation proceeded with EDR and more rapidly for the higher Mv's. Furthermore, the crystal transformation proceeded most rapidly with EDR at a Text around 130 °C, independently of the Mv's. As a result of the optimum combination of processing variables influencing the the crystal transformation (Mv, Text, and drawability), highly oriented films consisting of β‐form crystals alone were obtained by coextrusion of higher Mv samples at Text's slightly below the melting temperature (150 ∼ 170 °C) and at higher EDR's > 11. Both the tensile modulus and strength increased rapidly with EDR. The modulus at a given EDR was slightly higher for the samples with higher Mv's. In contrast, the strength at a given EDR was remarkably higher for the higher M v's. The highest tensile modulus of 8.0 GPa and strength of 500 MPa were obtained with the sample of the highest Mv of 46 × 10 4 coextruded at 170 °C to the highest EDR of 14.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
Synthesis of polylactides with different molecular weights
Hyon, S.-H., Jamshidi, K., & Ikada, Y. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00076-8 · Cited by 237
Self-citation
Cited by
Polymorphism and isomorphism in biodegradable polyesters
Pan, P., & Inoue, Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.003 · Cited by 611
Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid)
Cocca, M., Lorenzo, M. L. D., Malinconico, M., & Frezza, V. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.02.009 · Cited by 296
Pan, P., Yang, J., Shan, G., Bao, Y., Weng, Z., Cao, A., Yazawa, K., & Inoue, Y. (2012) · Macromolecules · doi:10.1021/ma201906a · Cited by 263
Zheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Tashiro, K., Kouno, N., Wang, H., & Tsuji, H. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01468 · Cited by 143
Metadata
- Authors
- Sawai, D., Yokoyama, T., Kanamoto, T., Sungil, M., Hyon, S., & Myasnikova, L. P.
- Venue
- Macromolecular Symposia
- Publisher
- Wiley
- Published
- 2006-10
- Volume
- 242
- Issue
- 1
- Pages
- 93-103
- ISSN
- 1022-1360 (ISSN-L)
- 1521-3900
- OpenAlex
- W2156134020
- Cited by
- 44
- References
- 2
- FWCI
- 1.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Crystal Transformation and Development of Tensile Properties upon Drawing of Poly(L‐lactic acid) by Solid‐State Coextrusion: Effects of Molecular Weight. https://app.cochat.ai/papers/10.1002/masy.200651015
- The paper
- Sawai, D., Yokoyama, T., Kanamoto, T., Sungil, M., Hyon, S., & Myasnikova, L. P. (2006). Crystal Transformation and Development of Tensile Properties upon Drawing of Poly(L‐lactic acid) by Solid‐State Coextrusion: Effects of Molecular Weight. Macromolecular Symposia. https://doi.org/10.1002/masy.200651015
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.