Synthesis of polylactides with different molecular weights
The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Abstract
The synthesis of poly(lactic acid) through polycondensation of the lactic acid monomer gave weight average molecular weights (Mw) lower than 1.6 x 10(4), whereas ring-opening polymerization of lactides in bulk at 130 degrees C for 72 h using stannous octoate as catalyst in the concentration range from 0.003 to 0.8 wt% produced polylactides with viscosity average molecular weight (Mv) ranging from 2 x 10(4) to 6.8 x 10(5). The monomer conversion and Mv showed a maximum at a catalyst concentration around 0.05 wt%. The monomer conversion and Mv increased almost linearly with polymerization time up to a monomer conversion of 80%, but both the conversion and Mv decreased after passing through a maximum, when the polymerization reaction was allowed to proceed for longer periods of time. This time dependence was pronounced at higher polymerization temperatures. The decrease in Mv at prolonged polymerization and higher polymerization temperatures was attributed to thermal depolymerization of resultant polylactides, but no significant optical rotation of poly(L-lactide) was noticed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Hyon et al. [40] used the same catalyst and obtained PLA with the maximum molecular weight at a catalyst concentration of 0.05% at a temperature of 130 °C.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [40]
Citations
Cites
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Polylactic Acid for Surgical Implants
KULKARNI, R. K. (1966) · Archives of Surgery · doi:10.1001/archsurg.1966.01330050143023 · Cited by 841
Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J. (1992) · Macromolecules · doi:10.1021/ma00050a006 · Cited by 407
Ajioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Journal of Environmental Polymer Degradation · doi:10.1007/bf02068677 · Cited by 322
Polylactide. II. Viscosity–molecular weight relationships and unperturbed chain dimensions
Schindler, A., & Harper, D. (1979) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1979.170170831 · Cited by 278
Ajioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.68.2125 · Cited by 245
Configurational structures of lactic acid stereocopolymers as determined by 13C{1H} n.m.r.
Chabot, F., Vert, M., Chapelle, S., & Granger, P. (1983) · Polymer · doi:10.1016/0032-3861(83)90080-0 · Cited by 234
Thermodynamics of L-lactide polymerization. Equilibrium monomer concentration
Duda, A., & Penczek, S. (1990) · Macromolecules · doi:10.1021/ma00208a012 · Cited by 198
Kleine, V. J., & Kleine, H. (1959) · Die Makromolekulare Chemie · doi:10.1002/macp.1959.020300102 · Cited by 151
Gupta, M. C., & Deshmukh, V. G. (1982) · Colloid & Polymer Science · doi:10.1007/bf01452999 · Cited by 139
Cited by
Chemical Routes for the Transformation of Biomass into Chemicals
Corma, A., Iborra, S., & Velty, A. (2007) · Chemical Reviews · doi:10.1021/cr050989d · Cited by 5,970
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds
Reddy, M. S. B., Ponnamma, D., Choudhary, R., & Sadasivuni, K. K. (2021) · Polymers · doi:10.3390/polym13071105 · Cited by 1,104
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
“Mark-Hauwink equation for the different conditions are given as follows: When chloroform was used as a solvent at 25 C [146]”
Method
Metadata
- Authors
- Hyon, S.-H., Jamshidi, K., & Ikada, Y.
- Affiliations
- Kyoto University (JP)
- Corresponding author
- Ikada, Yoshito
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 1997-01
- Volume
- 18
- Issue
- 22
- Pages
- 1503-1508
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W1967527739
- Cited by
- 237
- References
- 20
- Citations by year
- 2026: 2 · 2025: 1 · 2024: 6 · 2023: 8 · 2022: 5 · 2021: 9 · 2020: 4 · 2019: 7 · 2018: 12 · 2017: 13 · 2016: 15 · 2015: 10 · 2014: 11 · 2013: 19 · 2012: 10
- FWCI
- 0.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Biomaterials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, ring-opening polymerization, lactide, stannous octoate catalyst, molecular weight, viscosity average molecular weight, monomer conversion, thermal depolymerization, polymerization temperature, polymerization time
- MeSH terms
- Biocompatible Materials, Kinetics, Molecular Weight, Optical Rotation, Polyesters, Temperature, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis of polylactides with different molecular weights. https://app.cochat.ai/papers/10.1016/s0142-9612(97)00076-8
- The paper
- Hyon, S.-H., Jamshidi, K., & Ikada, Y. (1997). Synthesis of polylactides with different molecular weights. Biomaterials. https://doi.org/10.1016/s0142-9612(97)00076-8
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.