Modeling of Shape Memory Induction and Recovery in Heat‐Shrinkable Polymers
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Summary: A mechanical model was developed to describe qualitatively and quantitatively the stress‐strain‐time behavior of a prepared shape memory crosslinked polyethylene during hot stretching, stress relaxation under 200% strain at high temperature and strain recovery of the heat shrinkable polymer. The stress‐strain, the stress relaxation and the irrecoverable strain behavior of the model were established by driving the constitutive equation, which could qualitatively represent the behavior of the real material. By choosing significant values for the parameters of the proposed model, an excellent fit was obtained between the experimental behavior of the polymer and that predicted by the model. It was also revealed that the main source responsible for the imperfect recovery of the induced strain observed was the stress relaxation occurring during the stretch holding‐cooling time step. Stress relaxation of crosslinked polyethylene under 200% strain at 160 °C. magnified imageStress relaxation of crosslinked polyethylene under 200% strain at 160 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation and properties of heat‐shrinkable cross‐linked low‐density polyethylene
Morshedian, J., Khonakdar, H. A., Mehrabzadeh, M., & Eslami, H. (2003) · Advances in Polymer Technology · doi:10.1002/adv.10041 · Cited by 71
Self-citation
Research works printed but not linked: 21
- 10.1007/978-94-009-4101-4 · doi:10.1007/978-94-009-4101-4
- 10.1109/57.79583 · DOI
- Rado R., 1992, Int. Polym. Sci. Technol., 19, 72
- 10.1002/app.11111 · doi:10.1002/app.11111
- 10.1002/1521-3927(20010401)22:7<498::AID-MARC498>3.0.CO;2-8 · DOI
- 10.1002/1097-0126(200012)49:12<1615::AID-PI560>3.0.CO;2-N · DOI
- 10.1106/WDYT-TUQP-1W0U-YLRK · DOI
- 10.1109/57.75767 · DOI
- 10.1002/1439-2054(20010401)286:4<243::AID-MAME243>3.0.CO;2-T · DOI
- 10.1016/0146-5724(81)90066-2 · DOI
- 10.1002/1521-3773(20020617)41:12<2034::AID-ANIE2034>3.0.CO;2-M · doi:10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m
- 10.1016/S0032-3861(03)00363-X · DOI · Paper page
- 10.1016/S0014-3057(03)00076-4 · DOI
- 10.1002/app.13426 · DOI
- 10.1002/(SICI)1097-4628(19970502)64:5<823::AID-APP1>3.0.CO;2-R · DOI
- 10.1002/pen.760341405 · doi:10.1002/pen.760341405
- 10.1016/0032-3861(85)90221-6 · DOI
- 10.1016/0032-3861(85)90221-6 · DOI
- 10.1016/0032-3861(86)90297-1 · doi:10.1016/0032-3861(86)90297-1
- 10.1016/0032-3861(88)90358-8 · doi:10.1016/0032-3861(88)90358-8
- 10.1002/pen.11381 · DOI · Paper page
Cited by
Behl, M., & Lendlein, A. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70047-0 · Cited by 1,965
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Hu, J., Zhu, Y., Huang, H., & Lu, J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.001 · Cited by 1,279
Multifunctional Shape‐Memory Polymers
Behl, M., Razzaq, M. Y., & Lendlein, A. (2010) · Advanced Materials · doi:10.1002/adma.200904447 · Cited by 971
Mather, P. T., Luo, X., & Rousseau, I. A. (2009) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145419 · Cited by 911
Metadata
- Authors
- Morshedian, J., Khonakdar, H. A., & Rasouli, S.
- Venue
- Macromolecular Theory and Simulations
- Publisher
- Wiley
- Published
- 2005-08-09
- Volume
- 14
- Issue
- 7
- Pages
- 428-434
- ISSN
- 1022-1344 (ISSN-L)
- 1521-3919
- OpenAlex
- W2054211299
- Cited by
- 104
- References
- 1
- FWCI
- 4.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling of Shape Memory Induction and Recovery in Heat‐Shrinkable Polymers. https://app.cochat.ai/papers/10.1002/mats.200400108
- The paper
- Morshedian, J., Khonakdar, H. A., & Rasouli, S. (2005). Modeling of Shape Memory Induction and Recovery in Heat‐Shrinkable Polymers. Macromolecular Theory and Simulations. https://doi.org/10.1002/mats.200400108
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.