The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
A phase field model of dynamic fracture: Robust field updates for the analysis of complex crack patterns
Abstract
SUMMARY: The numerical modeling of dynamic failure mechanisms in solids due to fracture based on sharp crack discontinuities suffers in situations with complex crack topologies and demands the formulation of additional branching criteria. This drawback can be overcome by a diffusive crack modeling, which is based on the introduction of a crack phase field. Following our recent works on quasi‐static modeling of phase‐field‐type brittle fracture, we propose in this paper a computational framework for diffusive fracture for dynamic problems that allows the simulation of complex evolving crack topologies. It is based on the introduction of a local history field that contains a maximum reference energy obtained in the deformation history, which may be considered as a measure of the maximum tensile strain in the history. This local variable drives the evolution of the crack phase field. Its introduction provides a very transparent representation of the balance equation that governs the diffusive crack topology. In particular, it allows for the construction of a very robust algorithmic treatment for elastodynamic problems of diffusive fracture. Here, we extend the recently proposed operator split scheme from quasi‐static to dynamic problems. In a typical time step, it successively updates the history field, the crack phase field, and finally the displacement field. We demonstrate the performance of the phase field formulation of fracture by means of representative numerical examples, which show the evolution of complex crack patterns under dynamic loading. Copyright © 2012 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Optimal approximations by piecewise smooth functions and associated variational problems
Mumford, D., & Shah, J. (1989) · Communications on Pure and Applied Mathematics · doi:10.1002/cpa.3160420503 · Cited by 5,208
Revisiting brittle fracture as an energy minimization problem
Francfort, G. A., & Marigo, J.-J. (1998) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(98)00034-9 · Cited by 3,530
Miehe, C., Hofacker, M., & Welschinger, F. (2010) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2010.04.011 · Cited by 3,100
Self-citationMiehe, C., Welschinger, F., & Hofacker, M. (2010) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2861 · Cited by 2,942
Self-citationNumerical simulations of fast crack growth in brittle solids
Xu, X., & Needleman, A. (1994) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(94)90003-5 · Cited by 2,479
Computational modelling of impact damage in brittle materials
Camacho, G., & Ortíz, M. (1996) · International Journal of Solids and Structures · doi:10.1016/0020-7683(95)00255-3 · Cited by 2,037
Approximation of functional depending on jumps by elliptic functional via t‐convergence
Ambrosio, L., & Tortorelli, V. M. (1990) · Communications on Pure and Applied Mathematics · doi:10.1002/cpa.3160430805 · Cited by 1,471
Freund, L. B. (1990) · Cambridge University Press eBooks · doi:10.1017/cbo9780511546761 · Cited by 1,345
The Variational Approach to Fracture
Bourdin, B., Francfort, G. A., & Marigo, J.-J. (2008) · Springer eBooks · doi:10.1007/978-1-4020-6395-4 · Cited by 944
Phase-Field Model of Mode III Dynamic Fracture
Karma, A., Kessler, D. A., & Levine, H. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.045501 · Cited by 669
Dynamic crack propagation based on loss of hyperbolicity and a new discontinuous enrichment
Belytschko, T., Chen, H., Xu, J., et al. (2003) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.941 · Cited by 595
Damage, gradient of damage and principle of virtual power
Frémond, M., & Nedjar, B. (1996) · International Journal of Solids and Structures · doi:10.1016/0020-7683(95)00074-7 · Cited by 579
An experimental investigation into dynamic fracture: I. Crack initiation and arrest
Ravi-Chandar, K., & Knauss, W. G. (1984) · International Journal of Fracture · doi:10.1007/bf00963460 · Cited by 470
Laws of crack motion and phase-field models of fracture
Hakim, V., & Karma, A. (2009) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2008.10.012 · Cited by 405
Kane, C., Marsden, J. E., Ortíz, M., & West, M. (2000) · International Journal for Numerical Methods in Engineering · Cited by 401
A time-discrete model for dynamic fracture based on crack regularization
Bourdin, B., Larsen, C. J., & Richardson, C. L. (2011) · International Journal of Fracture · doi:10.1007/s10704-010-9562-x · Cited by 327
A Model for the Quasi-Static Growth¶of Brittle Fractures:¶Existence and Approximation Results
Dal Maso, G., & Toader, R. (2002) · Archive for Rational Mechanics and Analysis · doi:10.1007/s002050100187 · Cited by 310
An Efficient Adaptive Procedure for Three-Dimensional Fragmentation Simulations
Pandolfi, A., & Ortiz, M. (2002) · Engineering with Computers · doi:10.1007/s003660200013 · Cited by 197
Miehé, C., & Gürses, E. (2007) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1999 · Cited by 149
Gürses, E., & Miehé, C. (2009) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2008.12.028 · Cited by 113
Fracture in mode I using a conserved phase-field model
Eastgate, L. O., Sethna, J. P., Rauscher, M., Cretegny, T., Chen, C.-S., & Myers, C. R. (2002) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.65.036117 · Cited by 107
Cited by
Crack nucleation in variational phase-field models of brittle fracture
Tanné, E., Li, T., Bourdin, B., Marigo, J.-J., & Maurini, C. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.09.006 · Cited by 654
Phase-field modeling of fracture
(2020) · Advances in Applied Mechanics · doi:10.1016/bs.aams.2019.08.001 · Cited by 620
Molnár, G., & Gravouil, A. (2017) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2017.03.002 · Cited by 515
Why do cracks branch? A peridynamic investigation of dynamic brittle fracture
Bobaru, F., & Zhang, G. (2015) · International Journal of Fracture · doi:10.1007/s10704-015-0056-8 · Cited by 320
An explicit phase field method for brittle dynamic fracture
Ren, H. L., Zhuang, X. Y., Anitescu, C., & Rabczuk, T. (2019) · Computers & Structures · doi:10.1016/j.compstruc.2019.03.005 · Cited by 315
Metadata
- Authors
- Hofacker, M., & Miehe, C.
- Venue
- International Journal for Numerical Methods in Engineering
- Publisher
- Wiley
- Published
- 2012-07-31
- Volume
- 93
- Issue
- 3
- Pages
- 276-301
- ISSN
- 0029-5981 (ISSN-L)
- 1097-0207
- OpenAlex
- W1922503614
- Cited by
- 306
- References
- 22
- FWCI
- 10.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.