The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Dimensional reduction of nonlinear finite element dynamic models with finite rotations and energy‐based mesh sampling and weighting for computational efficiency
Abstract
SUMMARY: A rigorous computational framework for the dimensional reduction of discrete, high‐fidelity, nonlinear, finite element structural dynamics models is presented. It is based on the pre‐computation of solution snapshots, their compression into a reduced‐order basis, and the Galerkin projection of the given discrete high‐dimensional model onto this basis. To this effect, this framework distinguishes between vector‐valued displacements and manifold‐valued finite rotations. To minimize computational complexity, it also differentiates between the cases of constant and configuration‐dependent mass matrices. Like most projection‐based nonlinear model reduction methods, however, its computational efficiency hinges not only on the ability of the constructed reduced‐order basis to capture the dominant features of the solution of interest but also on the ability of this framework to compute fast and accurate approximations of the projection onto a subspace of tangent matrices and/or force vectors. The computation of the latter approximations is often referred to in the literature as hyper reduction. Hence, this paper also presents the energy‐conserving sampling and weighting (ECSW) hyper reduction method for discrete (or semi‐discrete), nonlinear, finite element structural dynamics models. Based on mesh sampling and the principle of virtual work, ECSW is natural for finite element computations and preserves an important energetic aspect of the high‐dimensional finite element model to be reduced. Equipped with this hyper reduction procedure, the aforementioned Galerkin projection framework is first demonstrated for several academic but challenging problems. Then, its potential for the effective solution of real problems is highlighted with the realistic simulation of the transient response of a vehicle to an underbody blast event. For this problem, the proposed nonlinear model reduction framework reduces the CPU time required by a typical high‐dimensional model by up to four orders of magnitude while maintaining a good level of accuracy. Copyright © 2014 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Mechanics and Symmetry: A Basic Exposition of Classical Mechanical Systems
Marsden, J. E., & Ratiu, T. S. (1999) · Texts in Applied Mathematics · doi:10.1007/978-0-387-21792-5 · Cited by 2,961
Solving Least Squares Problems.
Ling, R. F., Lawson, C. L., & Hanson, R. J. (1977) · Journal of the American Statistical Association · doi:10.2307/2286501 · Cited by 2,723
Chung, J., & Hulbert, G. M. (1993) · Journal of Applied Mechanics · doi:10.1115/1.2900803 · Cited by 2,335
Simo, J. C. (1992) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(92)90123-2 · Cited by 792
On the approximability of minimizing nonzero variables or unsatisfied relations in linear systems
Amaldi, E., & Kann, V. (1998) · Theoretical Computer Science · doi:10.1016/s0304-3975(97)00115-1 · Cited by 753
Interpolation Method for Adapting Reduced-Order Models and Application to Aeroelasticity
Amsallem, D., & Farhat, C. (2008) · AIAA Journal · doi:10.2514/1.35374 · Cited by 710
Self-citationCarlberg, K., Bou‐Mosleh, C., & Farhat, C. (2010) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.3050 · Cited by 700
Self-citationCarlberg, K., Farhat, C., Cortial, J., & Amsallem, D. (2013) · Journal of Computational Physics · doi:10.1016/j.jcp.2013.02.028 · Cited by 658
Self-citationFarhat, C., Lesoinne, M., & Tallec, P. L. (1998) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(97)00216-8 · Cited by 623
Self-citationPrud'Homme, C., Rovas, D., Veroy, K., Machiels, L., Maday, Y., Patera, A. T., & Turinici, G. (2001) · Journal of Fluids Engineering · doi:10.1115/1.1448332 · Cited by 612
Cited by
Eighty Years of the Finite Element Method: Birth, Evolution, and Future
Liu, W. K., Li, S., & Park, H. S. (2022) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-022-09740-9 · Cited by 322
Galerkin v. least-squares Petrov–Galerkin projection in nonlinear model reduction
Carlberg, K., Barone, M., & Antil, H. (2017) · Journal of Computational Physics · doi:10.1016/j.jcp.2016.10.033 · Cited by 314
Farhat, C., Chapman, T., & Avery, P. (2015) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.4820 · Cited by 307
Self-citationOn the use of simulation in robotics: Opportunities, challenges, and suggestions for moving forward
Choi, H., Crump, C., Duriez, C., Elmquist, A., Hager, G., Han, D., Hearl, F., Hodgins, J., Jain, A., Leve, F., et al. (2021) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1907856118 · Cited by 162
Metadata
- Authors
- Farhat, C., Avery, P., Chapman, T., & Cortial, J.
- Venue
- International Journal for Numerical Methods in Engineering
- Publisher
- Wiley
- Published
- 2014-04-07
- Volume
- 98
- Issue
- 9
- Pages
- 625-662
- ISSN
- 0029-5981 (ISSN-L)
- 1097-0207
- OpenAlex
- W1544956813
- Cited by
- 371
- References
- 22
- FWCI
- 12.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dimensional reduction of nonlinear finite element dynamic models with finite rotations and energy‐based mesh sampling and weighting for computational efficiency. https://app.cochat.ai/papers/10.1002/nme.4668
- The paper
- Farhat, C., Avery, P., Chapman, T., & Cortial, J. (2014). Dimensional reduction of nonlinear finite element dynamic models with finite rotations and energy‐based mesh sampling and weighting for computational efficiency. International Journal for Numerical Methods in Engineering. https://doi.org/10.1002/nme.4668
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.