The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Structure‐preserving, stability, and accuracy properties of the energy‐conserving sampling and weighting method for the hyper reduction of nonlinear finite element dynamic models
Abstract
Summary: The computational efficiency of a typical, projection‐based, nonlinear model reduction method hinges on the efficient approximation, for explicit computations, of the scalar projections onto a subspace of a residual vector. For implicit computations, it also hinges on the additional efficient approximation of similar projections of the Jacobian of this residual with respect to the solution. The computation of both approximations is often referred to in the literature as hyper reduction. To this effect, this paper focuses on the analysis and comparative performance study for nonlinear finite element reduced‐order models of solids and structures of the recently developed energy‐conserving mesh sampling and weighting (ECSW) hyper reduction method. Unlike most alternative approaches, this method approximates the scalar projections of residuals and/or Jacobians directly, instead of approximating first these vectors and matrices then projecting the resulting approximations onto the subspaces of interest. In this paper, it is shown that ECSW distinguishes itself furthermore from other hyper reduction methods through its preservation of the Lagrangian structure associated with Hamilton's principle. For second‐order dynamical systems, this enables it to also preserve the numerical stability properties of the discrete system to which it is applied. It is also shown that for a fixed set of parameter values, the approximation error committed online by ECSW is bounded by its counterpart error committed off‐line during the training of this method. Therefore, this error can be estimated in this case a priori and controlled. The performance of ECSW is demonstrated first for two academic but nevertheless interesting nonlinear dynamic response problems. For both of them, ECSW is shown to preserve numerical stability and deliver the desired level of accuracy, whereas the discrete empirical interpolation method and its recently introduced unassembled variant are shown to be susceptible to failure because of numerical instability. The potential of ECSW for enabling the effective reduction of nonlinear finite element dynamic models of solids and structures is also highlighted with the realistic simulation of the nonlinear transient dynamic response of a complete car engine to thermal and combustion pressure loads using an implicit scheme. For this simulation, ECSW is reported to enable the reduction of the CPU time required by the high‐dimensional nonlinear finite element dynamic analysis by more than four orders of magnitude, while achieving a very good level of accuracy. Copyright © 2015 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solving Least Squares Problems
Lawson, C. L., & Hanson, R. J. (1995) · doi:10.1137/1.9781611971217 · Cited by 7,103
Turbulence and the dynamics of coherent structures. I. Coherent structures
Sirovich, L. (1987) · Quarterly of Applied Mathematics · doi:10.1090/qam/910462 · Cited by 6,224
Introduction to Mechanics and Symmetry: A Basic Exposition of Classical Mechanical Systems
Marsden, J. E., & Ratiu, T. S. (1999) · Texts in Applied Mathematics · doi:10.1007/978-0-387-21792-5 · Cited by 2,961
Nonlinear Model Reduction via Discrete Empirical Interpolation
Chaturantabut, S., & Sorensen, D. C. (2010) · SIAM Journal on Scientific Computing · doi:10.1137/090766498 · Cited by 1,925
Karhunen–Loève procedure for gappy data
Everson, R., & Sirovich, L. (1995) · Journal of the Optical Society of America A · doi:10.1364/josaa.12.001657 · Cited by 906
On the approximability of minimizing nonzero variables or unsatisfied relations in linear systems
Amaldi, E., & Kann, V. (1998) · Theoretical Computer Science · doi:10.1016/s0304-3975(97)00115-1 · Cited by 753
Carlberg, K., Bou‐Mosleh, C., & Farhat, C. (2010) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.3050 · Cited by 700
Self-citationCarlberg, K., Farhat, C., Cortial, J., & Amsallem, D. (2013) · Journal of Computational Physics · doi:10.1016/j.jcp.2013.02.028 · Cited by 658
Self-citationFarhat, C., Lesoinne, M., & Tallec, P. L. (1998) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(97)00216-8 · Cited by 623
Self-citationPrud'Homme, C., Rovas, D., Veroy, K., Machiels, L., Maday, Y., Patera, A. T., & Turinici, G. (2001) · Journal of Fluids Engineering · doi:10.1115/1.1448332 · Cited by 612
Cited by
DIGITAL TWINS FOR LARGE ELECTRIC DRIVE TRAINS
Brandtstaedter, H., Ludwig, C., Hubner, L., Tsouchnika, E., Jungiewicz, A., & Wever, U. (2018) · 2018 Petroleum and Chemical Industry Conference Europe (PCIC Europe) · doi:10.23919/pciceurope.2018.8491413 · Cited by 30
Metadata
- Authors
- Farhat, C., Chapman, T., & Avery, P.
- Venue
- International Journal for Numerical Methods in Engineering
- Publisher
- Wiley
- Published
- 2015-03-03
- Volume
- 102
- Issue
- 5
- Pages
- 1077-1110
- ISSN
- 0029-5981 (ISSN-L)
- 1097-0207
- OpenAlex
- W1902394114
- Cited by
- 307
- References
- 24
- FWCI
- 11.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structure‐preserving, stability, and accuracy properties of the energy‐conserving sampling and weighting method for the hyper reduction of nonlinear finite element dynamic models. https://app.cochat.ai/papers/10.1002/nme.4820
- The paper
- Farhat, C., Chapman, T., & Avery, P. (2015). Structure‐preserving, stability, and accuracy properties of the energy‐conserving sampling and weighting method for the hyper reduction of nonlinear finite element dynamic models. International Journal for Numerical Methods in Engineering. https://doi.org/10.1002/nme.4820
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.