The DOI matches its Crossref record.
Characterization on polystyrene/zinc oxide nanocomposites prepared from solution mixing
Abstract
Polystyrene (PS)/zinc oxide (ZnO) nanocomposites were prepared by solution mixing, followed by film casting. The effects of ZnO nanoparticles on the physical properties of PS were investigated. Transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM) showed that ZnO nanoparticles were homogeneously dispersed in the PS matrix. The introduction of 5 wt% ZnO increased slightly the glass transition temperature by 2.3°C. Thermal gravimetric analysis thermograms showed that the thermal stability of PS was enhanced with increasing ZnO content. Neither shift nor sharpening of absorption band was detected by infrared spectra. ZnO nanoparticles had little effect on the wide‐angle X‐ray diffraction (WAXD) pattern of PS. The transmittance of ultraviolet light was decreased with increasing ZnO content. PS/ZnO nanocomposites exhibited a small reduction in tensile strength and elongation to break. However, a significant enhancement in tensile modulus was achieved when 5 wt% ZnO was introduced. In the FESEM images of the tensile fractured surface, localized plastic deformation was observed for PS, while the site from which ZnO was pulled out was usually observed in the nanocomposites. Copyright © 2006 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Zinc oxide—from synthesis to application: a review
Kołodziejczak-Radzimska, A., & Jesionowski, T. (2014) · Materials · doi:10.3390/ma7042833 · Cited by 2,475
Functional inorganic nanofillers for transparent polymers
Althues, H., Henle, J., & Kaskel, S. (2007) · Chemical Society Reviews · doi:10.1039/b608177k · Cited by 639
Nanocomposites Derived from Polymers and Inorganic Nanoparticles
Jeon, I.-Y., & Baek, J.-B. (2010) · Materials · doi:10.3390/ma3063654 · Cited by 513
Nanocomposites of polymer and inorganic nanoparticles for optical and magnetic applications
Li, S., Meng Lin, M., Toprak, M. S., Kim, D. K., & Muhammed, M. (2010) · Nano Reviews · doi:10.3402/nano.v1i0.5214 · Cited by 479
Transparent polymer nanocomposites: An overview on their synthesis and advanced properties
Loste, J., Lopez-Cuesta, J.-M., Billon, L., Garay, H., & Save, M. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.003 · Cited by 350
Synthesis, optimization and applications of ZnO/polymer nanocomposites
Ponnamma, D., Cabibihan, J.-J., Rajan, M., Pethaiah, S. S., Deshmukh, K., Gogoi, J. P., Pasha, S. K. K., Ahamed, M. B., Krishnegowda, J., Chandrashekar, B. N., et al. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.01.081 · Cited by 304
Advanced hybrid nanomaterials for biomedical applications
Park, W., Shin, H., Choi, B., Rhim, W.-K., Na, K., & Keun Han, D. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100686 · Cited by 299
Metadata
- Authors
- Chae, D. W., & Kim, B. C.
- Venue
- Polymers for Advanced Technologies
- Publisher
- Wiley
- Published
- 2005-11
- Volume
- 16
- Issue
- 11-12
- Pages
- 846-850
- ISSN
- 1042-7147 (ISSN-L)
- 1099-1581
- OpenAlex
- W2009639155
- Cited by
- 178
- References
- 0
- FWCI
- 3.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.