The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Mechanical and thermal properties of environment‐friendly “green” composites made from pineapple leaf fibers and poly(hydroxybutyrate‐co‐valerate) resin
Abstract
This paper presents the mechanical and thermal properties of unidirectional, degradable, environment‐friendly “green” composites made from pineapple fibers and poly(hydroxybutyrate‐co‐valerate) (PHBV) resin. Tensile and flexural properties of the “green” composites with different fiber contents were measured in both longitudinal and transverse directions. Compared to those of virgin resin, the tensile and flexural strengths of “green” composites are significantly higher in the longitudinal direction while they are lower in the transverse direction. However, the mechanical properties are lower than those predicted by simple models. Scanning electron microscope (SEM) photomicrographs of the tensile fracture surfaces demonstrate fibers being pulled out from the matrix, the interfacial failure, fiber fibrillation, and the nonunidirectional nature of the “green” composites. The thermal behavior of the “green” composites, studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), showed that the presence of pineapple fibers does not affect the nonisothermal crystallization kinetics, crystallinity, and thermal decomposition of PHBV resin.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Crystallization and morphology of a bacterial thermoplastic: poly-3-hydroxybutyrate
Barham, P. J., Keller, A., Otun, E. L., & Holmes, P. A. (1984) · Journal of Materials Science · doi:10.1007/bf01026954 · Cited by 1,080
Joseph, K., Thomas, S., & Pavithran, C. (1996) · Polymer · doi:10.1016/0032-3861(96)00144-9 · Cited by 742
Doi, Y., Kanesawa, Y., Kunioka, M., & Saito, T. (1990) · Macromolecules · doi:10.1021/ma00203a006 · Cited by 515
Studies of composition and crystallinity of bacterial poly(β-hydroxybutyrate-co-β-hydroxyvalerate)
Bloembergen, S., Holden, D. A., Hamer, G. K., Bluhm, T. L., & MARCHESSAULT, R. H. (1986) · Macromolecules · doi:10.1021/ma00165a034 · Cited by 384
The thermal degradation of poly(-(d)-β-hydroxybutyric acid): Part 2—Changes in molecular weight
Grassie, N., Murray, E. J., & Holmes, P. A. (1984) · Polymer Degradation and Stability · doi:10.1016/0141-3910(84)90075-2 · Cited by 270
Kunioka, M., & Doi, Y. (1990) · Macromolecules · doi:10.1021/ma00209a009 · Cited by 266
The relationship between microstructure and mode of fracture in polyhydroxybutyrate
Barham, P. J., & Keller, A. (1986) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1986.180240108 · Cited by 254
Biodegradable plastics: A review
Huang, J., Shetty, A. S., & Wang, M. (1990) · Advances in Polymer Technology · doi:10.1002/adv.1990.060100103 · Cited by 186
Tensile properties of short sisal fiber‐reinforced polyethylene composites
Joseph, K., Thomas, S., Pavithran, C., & Brahmakumar, M. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070471003 · Cited by 184
Poly-?-hydroxybutters�ure abbauende Bakterien und Exoenzym
Chowdhury, A. A. (1963) · Archives of Microbiology · doi:10.1007/bf00422523 · Cited by 149
Cited by
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Green composites from sustainable cellulose nanofibrils: A review
Abdul Khalil, H. P. S., Bhat, A. H., & Ireana Yusra, A. F. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.078 · Cited by 1,573
Biodegradable composites based on lignocellulosic fibers—An overview
Satyanarayana, K. G., Arizaga, G. G. C., & Wypych, F. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.002 · Cited by 1,421
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Siqueira, G., Bras, J., & Dufresne, A. (2009) · Biomacromolecules · doi:10.1021/bm801193d · Cited by 791
Netravali, A. N., & Chabba, S. (2003) · Materials Today · doi:10.1016/s1369-7021(03)00427-9 · Cited by 649
Self-citationZini, E., & Scandola, M. (2011) · Polymer Composites · doi:10.1002/pc.21224 · Cited by 534
Bogoeva‐Gaceva, G., Avella, M., Malinconico, M., Buzarovska, A., Grozdanov, A., Gentile, G., & Errico, M. E. (2007) · Polymer Composites · doi:10.1002/pc.20270 · Cited by 521
A Review on Pineapple Leaf Fibers, Sisal Fibers and Their Biocomposites
Mishra, S., Mohanty, A. K., Drzal, L. T., Misra, M., & Hinrichsen, G. (2004) · Macromolecular Materials and Engineering · doi:10.1002/mame.200400132 · Cited by 423
Mechanical properties of woven banana fibre reinforced epoxy composites
Sapuan, S. M., Leenie, A., Harimi, M., & Beng, Y. K. (2006) · Materials & Design · doi:10.1016/j.matdes.2004.12.016 · Cited by 377
Mechanical properties of pineapple leaf fibre reinforced polypropylene composites
Arib, R. M. N., Sapuan, S. M., Ahmad, M. M. H. M., Paridah, M. T., & Zaman, H. M. D. K. (2006) · Materials & Design · doi:10.1016/j.matdes.2004.11.009 · Cited by 370
Kumar, R., Ul Haq, M. I., Raina, A., & Anand, A. (2019) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2018.1538267 · Cited by 354
Omrani, E., Menezes, P. L., & Rohatgi, P. K. (2016) · Engineering Science and Technology, an International Journal · doi:10.1016/j.jestch.2015.10.007 · Cited by 353
Liu, W., Misra, M., Askeland, P., Drzal, L. T., & Mohanty, A. K. (2005) · Polymer · doi:10.1016/j.polymer.2005.01.027 · Cited by 331
Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: A review on processing and properties
Ramesh, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.11.001 · Cited by 321
Metadata
- Authors
- Luo, S., & Netravali, A. N.
- Venue
- Polymer Composites
- Publisher
- Wiley
- Published
- 1999-06
- Volume
- 20
- Issue
- 3
- Pages
- 367-378
- ISSN
- 0272-8397 (ISSN-L)
- 1548-0569
- OpenAlex
- W2080062264
- Cited by
- 283
- References
- 12
- FWCI
- 6.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.